Top Toilet Flush Valve Cap Reviews

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

American Standard SELECTRONIC 6063051.002, Chrome

  • ✅ HIGH QUALITY: The toilet urinal flush valve is made of brass material, structural , plated finishing, stable performance, Durable and Solid Structure..
  • ✅ AUTOMATIC TOUCHLESS FLUSH: No need to touch any part of the flusher after urinating. The entire flushing process is mechanically controlled by the sensor, which is suitable and sanitary. The flushing is thorough, no irregular smell is left, avoiding infection of the effectively..
  • ✅ INTELLIGENT WATER-SAVING: The Urinal Valve sensor can control flushing according to the frequency of use, efficiently avoiding the waste of water resources..
  • ✅ LOW CONSUMPTION: The toilet flush valve need low energy consumption, which is powered by 4 AAA batteries, and no need for external power supply..
  • ✅ WIDELY USED: The toilet urinal flush valve exposed wall mounted, provides maximum water conservation and financial savings..
Check Stock

Fluidmaster 400AKRP10 400AKR Universal All in One Toilet Repair Kit, 2 inches, Easy Install

  • RESTORES OVERALL TOILET PERFORMANCE: All in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new..
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger.
  • HIGH PERFORMANCE FLAPPER: PerforMAX high performance 2-inch adjustable water-saving toilet flapper maximizes water usage with each flush.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Fluidmaster 507AKP7 PerforMAX Universal High Performance 2-Inch Toilet Flush Valve Repair Kit with Gasket and Bolts

  • ENHANCES YOUR TOILET’S POWER: Toilet fill valve with bolts and gasket replaces old or inefficient fill valves to repair a leaking toilet tank and optimize flush performance.
  • UNIVERSAL DESIGN: Fill valve replaces any two-piece toilet flush valve and is ideal for use in 3.5 gallons per flush toilets.
  • CORROSION RESISTANT: The 502 2-inch flapper features corrosion/hard water-resistant materials.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
  • when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock

HOROW HWMT-8733C Small Toilet with Slim Design Comfortable Seat, One Piece Narrow Compact Bathroom Tiny Mini Commode Water Close Dual Flush 0.8/1.28 GPF with Side Holes

  • Upgraded Slim Design Comfortable Seat: A timeless, sophisticated Slim toilet seat is included, it will make your backrest more comfortable against the toilet seat cover. Quick-Release seat can be unlatched from the toilet for easy removal and convenient cleaning no tools are required..
  • Modern Design: Modern compact one-piece toilet. This small round white toilet is smaller and shorter than a standard toilet, so it perfectly fits small bathrooms. The toilet seat is 2” shorter than a standard elongated toilet seat..
  • Siphon-Flushing: Dual flush with high-performance gravity 0.8 / 1.28 gallon per flush (GPF). Small toilet fully glazed flush, Super-quiet, and powerful flush with no clogs. Leak-proof..
  • Easily Installed with All-in-one Package: Two big installation access on the side allows the plumber to install this toilet much easier. Package includes toilet, Two toilet seats(Original seat & Upgraded Slim Seat), pre-installed flush valve, high-quality wax ring, floor bolts, and also installation instruction..
  • Certifications: cUPC, UPC and Water Sense certified. CEC compliant. cUPC certified water flush valve..
Check Stock

385314349 Toilet Water Valve Assembly RV Camper Trailer Toilet Repair Kit Compatible with Sealand Ecovac Vacuflush Flush Toilets Replacement for Dometic Foot Pedal Toilets Except 300 310 320 Model

  • Application: the 385314349 RV water valve is compatible with Sealand Marine VacuFlush, RV traveler and SeaLand low flush foot pedal toilets, Domestic....
  • Suitable for Dometic or Sealand toilet models: 506+, 510+, 511 H, 547+, 548+, 706, 709, 748, 749, 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006,....
  • Fit for EcoVac and VacuFlush toilets models: fit for EcoVac 146-149, fit for VacuFlush 168, 606, 647, 648, 1006, 1008, 1047, 1048, 1049, 1106, 5146,....
  • Nice design: if your toilet is overfilling, the toilet water valve will help avoid the toilet from leaking water, brass cap means that no more....
  • Easy installation: mounting screws and additional stainless mesh filters are included, which is convenient for you, the water valve is easy to....
Check Stock

Universal Toilet Repair Kits Complete Toilet Tank Repair Kit For 2-Inch Flush Valve Toilets with Fill Valve Toilet Flapper and Tank to Bowl Gaskets and Bolts All In One

  • 1.Adjustable Fill Valve: Toilet fill valve is quieter than other fill valves. Toilet fill valve height adjusts easily between 7.8inch to 13inch..
  • 2. 2-inch Toilet Flush Valve and toilet flapper: Adjustable 2 inch flush valve is quick and easy to install with no tools or hack sawing required. 2....
  • 3.Tank to Bowl Gaskets: The included hardware kits are brass to ensure long lasting. Special designed extra long nuts are for easy installation..
  • 4.Tank to Bowl Bolts: 2 pairs heavy duty bolts toilet bolts for tank solid brass with extra long nuts easy to install and double gaskets for....
  • 5.Everything needed included: Replaces inefficient fill and flush valves, leaky flappers, gasket and hardware bolts.Easy-to-install, simple....
Check Stock

2-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291)

  • Perfect Replacement for your Kohler K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620.
  • Create A Stronger Flush: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!.
  • Works On Kohlers With Flush Valve: Compatible with all Kohler toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8".
  • 3 Minute Install: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 2 for a great value!.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing).
Check Stock

TOTO MS853113S#01 Ultramax Round One Piece Toilet, Cotton White

  • Toto MS853113S#01 ULTRAMAX ROUND 1-PC TOILET W/ SC SEAT--COTTON.
  • G-Max flushing system: Quiet, powerful, commercial grade flushing performance.
  • Fast Flush: Wide 3-Inch flush valve is 125 percent larger than conventional 2-Inch flush valves.
  • Wider, 2-1/8-Inch computer designed, fully glazed trapway.
  • Length 26-1/2-Inch, Bowl Rim Height 14-1/2-Inch, Seat Height 15-Inch, Tank Height 27-1/2-Inch, Tank Width 16-1/2-Inch.
Check Stock

TOTO MS853113S#11 Ultramax Round One Piece Toilet, Colonial White

  • Toto MS853113S#11 ULTRAMAX ROUND 1-PC TOILET W/ SC SEAT--COLONIAL WHITE.
  • G-Max flushing system: Quiet, powerful, commercial grade flushing performance.
  • Fast Flush: Wide 3-Inch flush valve is 125 percent larger than conventional 2-Inch flush valves.
  • Wider, 2-1/8-Inch computer designed, fully glazed trapway.
  • Length 26-1/2-Inch, Bowl Rim Height 14-1/2-Inch, Seat Height 15-Inch, Tank Height 27-1/2-Inch, Tank Width 16-1/2-Inch.
Check Stock

Korky Platinum Fill Valve and Flapper Kit

  • UNIVERSAL FILL VALVE: This toilet fill valve replaces ballcocks & worn down valves for different types of 2-piece & 1-piece toilets. It’s easy to install & keeps your toilet running smoothly..
  • EASY TO INSTALL: Quiet replacement fill valve has a twist-lock adjustment that makes installation the easiest when you’re doing toilet repairs. Adjustable from 7.75” to 13.5.”.
  • INCLUDES: Installs in less than 5 minutes. Includes fill valve, refill tube, metal refill tube clip, mounting nut, cone washer, refill adjuster, coupling nut, tamper proof key & instructions..
  • UNIVERSAL FLAPPER: The 2″ universal flapper adjusts to fit flush valves in HET toilets & the flexible long lasting rubber creates a tight seal..
  • FOR LEAKING & RUNNING TOILETS: Save on expensive water waste with this large toilet flapper with a universal & adjustable design that fits standard flush valves & newer toilet models. No tools required..
  • LONG LASTING CHLORAZONE red rubber city water treatment, hard & well water. This toilet part replacement includes the universal adjustable flapper & stainless steel chain..
Check Stock