Top To Y Pipe Reviews

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

Exhaust Flapper Water Shutter kit Replacement for 1998 and newer Mercruiser 807166A1 Pair Set of 2

  • FITS for MerCruisers engines 1998 and newer..
  • There will be two rectangular holes for the grommets. If your Y-pipe has round holes you need the A3 water shutters. If your Y-pipe changes size a few....
  • The replacement part is made from high quality material and well-tested by the manufacturer..
  • Please check carefully the part numbers and compare pictures provided to insure proper fitment..
Check Stock

UanofCn 99370A2 Marine Water Exhaust Shutter for Mercruiser Stern Drive V6 V8 Engine 4.3L 5.0L 5.7L Sierra 18-2733

  • Exhaust Water Shutter w/Y Pipe Shutter/Flap Boat Motor for Outboard Engine.
  • UanofCn high-quality engine parts are designed to meet OEM specifications.
  • For some model: Mercruiser V6 V8 w/3" Y-Pipe 4.3L 5.0L 5.7L.
  • Replaces OE#: Mercury Mercruiser Outboard 99370A2 92802, Mallory 9-42801, Sierra 18-2733, GLM 89160.
Check Stock

Jackson Safety Pipe Marker Centering Head Tool, Curv-O-Mark Jumbo 7, To measure Pipes 1" and Up, Standard 8" Y-Type Head, Adjustable Dial Set Level, 14776

  • PIPE MEASURER – Designed for pipe fitters and welders as an measurer for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
  • JUMBO SIZE – Curv-O-Mark Jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
  • Y HEAD – The center finder has a 8" Y type head fitted with adjustable dial bubble protractor (DSL).
  • BEST OPERATION – Use this Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
  • SAFETY STANDARDS – When it comes to providing innovative safety solutions, unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

Jackson Safety Pipe Marker Centering Tool, Curv-O-Mark Standard 6, 14775 - Use to measure Pipes 0.5\ and Up, Standard 4\ Y-Type Head, Adjustable Dial Set Level

  • PIPE MEASURER – This easy-to-use marking tool is designed for pipe fitters and welders as an economical measuring tool for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
  • STANDARD SIZE – This Curv-O Standard #6 model level tool may be used on pipes and tanks that measure one-half of inch in diameter or larger.
  • Y-HEAD – The center finder has a 4 inch Y-type head fitted with an adjustable dial bubble protractor (DSL).
  • BEST OPERATION – Use this manual Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
  • SAFETY STANDARDS – When it comes to providing innovative safety solutions, welding tools with unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

T/Y Corrugated Coupler Connects to 3-in and 4-in Pipe

  • Allows the ability to create endless angles.
  • Adapts to fit 3” or 4” corrugated pipe and 4” PVC pipe.
Check Stock

Gionforsy 1920s Mens Gatsby Gangster Costume Accessories Set Old Man Costume Grandpa Accessories Set with Fedora Hat

  • The old man costume accessories set includes: 1*beret hat, 1*fake eyebrows and beard, 1*bow tie, 1*Y-back elastic suspender, 1*glasses, 1*fake pipe, 1*vintage pocket watch（without battery, not actually work）and 1*cane. What you see is what you get..
  • Newsboy hat: comfortable and one size fits most, bow tie is made of smooth polyester, Y-back suspender is elastic and easy to wear, pipe and cane are made of plastic material, pocket watch is made of alloy, glasses is a accessory and has no degree..
  • The complete costume accessories and easy to wear, you will get a lot of complements in party..
  • The 1920s gangster costume accessories set is perfect for 1920' s party, Great Gatsby gangster themed party, roaring 20s party, dressing up, prom, and all kinds of vintage party..
  • Great gift for your husband, grandpa, father and boyfriend in a special day!.
Check Stock

Central Vacuum 4-Inlet Installation Kit 100 feet of Pipe All in a Box

  • ✅ Fits all brands: Nutone, Honeywell, Ultra Clean, Prolux, Beam, Electrolux, Eureka, Hayden, Allegro, AirVac, Vacuflo, MD & many more.
  • ✅ You will receive 4 X STANDARD NEW DESIGN TRENDY FULL DOOR VALVES INLET WALL VALVE, white color, 4 X Mounting Plate (for the valves), 12 x 90 Degree Sweep Elbow, 8 x 45 Degree Elbow, 12 x Stop Coupling (to join the 2” pipe together).
  • ✅ 3 x 90 “Y”, 4x 90 Sharp Elbow, 8 x pipe strap, 1 x wire (125 ft), 1 x Solvent Cement (125 ml).
  • ✅ 100 ft Pipe (in 4 ft lengths) - Central Vacuum Standard 2" O.D. PVC pipe. - Printed centre-line is provided for ease of installation.Low internal surface air friction. - ASTM F-2158 Approved. This item is offered in a box of 100 foot. - The actual pipe length is 48" (121 cm).
  • ✅ Amazon's choice for suggested central vacuum package (not included in this listing) is shown in one of the pictures: https://www.amazon.com/dp/B01ND02528.
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes Black,1/4 Inch Od

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Gionforsy 1920s Mens Gatsby Gangster Costume Accessories Set Old Man Costume Grandpa Accessories Set with Newsboy Hat (Style3-Gray)

  • The old man costume accessories set includes: 1*beret hat, 1*fake eyebrows and beard, 1*bow tie, 1*Y-back elastic suspender, 1*glasses, 1*fake pipe, 1*vintage pocket watch（without battery, not actually work）and 1*cane. What you see is what you get..
  • Newsboy hat: comfortable and one size fits most, bow tie is made of smooth polyester, Y-back suspender is elastic and easy to wear, pipe and cane are made of plastic material, pocket watch is made of alloy, glasses is a accessory and has no degree..
  • The complete costume accessories and easy to wear, you will get a lot of complements in party..
  • The 1920s gangster costume accessories set is perfect for 1920' s party, Great Gatsby gangster themed party, roaring 20s party, dressing up, prom, and all kinds of vintage party..
  • Great gift for your husband, grandpa, father and boyfriend in a special day!.
Check Stock

TITAN 757 PERFORMANCE Mercruiser Water Shutter Flappers Replaces 807166A2 V6 4.3L

  • New Mercruiser Water Shutter Kit for 4.3L V6.
  • This will only fit in y-pipe that was on the V-6 engines originally equipped with the one-piece exhaust manifolds. Will not fit later model y-pipes....
Check Stock