Top Tm Pro Trigger Module Reviews

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..

Check Stock

DiMarzio DP188 Pro Track Pickup White

It's warm, it's friendly, it sounds like a vintage PAF and will drop right into your Strat.
The Pro Track(TM) has enough power for any pickup position, and the two nickel-plated blades mean there won't be any problems with string-alignment or dropouts.
Pro Track In the bridge position, this is a great blues pickup: combine it with The Cruiser (neck) and a Fast Track 1(TM) (middle) for a solid mix.
Pair two Pro Track(TM) pickups in the neck and middle positions with a Fast Track 2(TM) or any full-size humbucker in the bridge position for a heavy yet versatile rock sound.
We've heard from several players who need to play some jazz numbers without switching guitars, and they say the Pro Track(TM) is an excellent neck pickup.

Check Stock

GuiPQS Pd Trigger Module USB Pd Trigger Module USB-C Type-C Pd Trigger Module USB-C Type-C Pd 12v Dc Fixed Voltage Power Trigger Module 5a Pd 2.0 3.0 Power Delivery Decoy Board (5 Pack)

Attention: In order to use over 3A you will need to use an electronically marked Type-C cable.
The USB Type-C PD trigger module just performs the PD negotiation and passes the output 12V, Supports up to 5A..
Not all USB-C power supplies can support all voltages. If the power supply does not support the requested voltage then the next lowest voltage will be provided by the PD trigger module..
This Type-C PD trigger module required a real USB PD power source is required, will not work with QC-only chargers..
This USB Type-C pd trigger module power an electronic project or convert old hardware to use USB-C power input.

Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

Check Stock

NR2-25 Electric Overload Relay Adjustable Motor Protection Thermal 50-60hz(17-25A)

◇ ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
◇ STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
◇ HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
◇ DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
◇ MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
Output Capability: AC 250V/30A, less than DC 30V/30A.

Check Stock

4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)

[Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
[Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
[Easy to Use] The clock module connected to digital I/O via 2 pins..
[Easy to Install] This LED display designed with 4 mounting holes for easy installation..
[High Quality] The clock module is made of high quality electronic components, stable and reliable performance.

Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

Check Stock

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.

Check Stock

DIY Greeting Card Chip 120 Seconds Recordable Voice Sound Chip Module Built-in Button Battery for Gift Boxes, Invitations, Handmade Products

[120 SECONDS VOICE MODULE] You can record music or what you want to say according to your requirements for up to 120 seconds..
[TRIGGER BUTTON FUNCTION] Recordable voice module, trigger the button to play. When the playback is over, press the button to play again..
[BUILT-IN REPLACEABLE BUTTON BATTERY] The recordable voice module is built-in replaceable button battery for power supply, very easy to use..
[WIDE COMPACIBILITY] The recordable voice module is suitable for DIY homemade greeting cards, gift boxes, invitations, handmade products, etc..
[CAN BE REPEATED] The recording can be repeated, and each recording will overwrite the last recording..

Check Stock

X10 LM465 Lamp Control Module

Enables X10 remote control for a plug-in light.
Requires TM751 Transmitter. Lamp plugs into the module.

Check Stock

YWBL-WH Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(5VDC)

ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
Output Capability: AC 250V/30A, less than DC 30V/30A.

Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
corridor delay switch, delay energy-saving products.
Supply voltage: AC 220V power supply, Current: greater than 100mA.

Check Stock

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.

Check Stock