Top Titanium Electrode Insoluble Anode Reviews

Pure Copper Anode 2 Pcs, 3.93 x 0.79 x 0.04 Inch (19 GA) 99.95% High Purity Copper Electrode Strips, Pure Copper Sheet for Copper Plating and Copper Electroplating

  • HIGH PURITY COPPER---- This copper electrode has a copper content of 99.95% giving it a pure copper rating..
  • SIZE----3.93''x 0.79''x 0.04''(100mm x 20mm x 1mm), 3.93 inch long, 0.79 inch wide and 0.04 inch thick. Please refer to the picture to get the detail parameters..
  • SATISFACTION GUARANTEE: Our pure copper anode comes with a one year satisfaction guarantee. Please contact our customer support team with any questions or issues that you may have. They will be more than happy to assist you..
Check Stock

Denso (3297) SK20R11 Spark Plugs, Pack of 4

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Forney - 85657 9FV TIG Torch

  • TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
  • AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
  • COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
  • PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
  • INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.
Check Stock

SK20HR11 3421 Iridium Spark Plugs Replacement For Lexus GX460 Toyota Benz Tundra SET (8)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

www.solarionizer.com Replacement Anode Guaranteed to fit Remington Solar (See Image 3) | Anode Dimensions (See Image 2) | Free: 1 Wing Screw and 1 Basket

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. (1.) Anode dimensions listed on image (2.) Anode will ONLY fit with heavy duty wing-screw provided with anode for durability (3.) Anode cannot be rotated because thread sizes optimized for durability.
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace an anode with more than 80% of the anode remaining. CONTACT HILLTOP SOLAR customer service to inquire if anode replacement is needed, prior to purchasing an anode. WE SAVE YOU MONEY!!.
  • DO NOT CLEAN ANODE: Any brand of Solar Ionizer unit automatically cleans the anode during ionization process. Power from a solar ionizer is applied at center of anode that cannot be cleaned. Cleaning on outside of an anode with any abrasive materials, will result with NO BENEFITS other than: 1. Frequent anode replacements 2. Significantly increase costs ....
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Solar Ionizer Replacement Anode/Mineral Electrode Compatible with Floatron - 1 Anode |1 Basket | 1 Wing-Screw

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. 1.) Anode dimensions are optimized for maximum ions in water to reduce chlorine use 2) Each anode may last 12 to 15 months. 3.) Guaranteed to fit Floatron brand (see image 2). Bigger anode causes unit to be inoperative majority of time due to insufficient clearance between coil and anode. Hilltop Solar anodes save money on chlorine and pool operating costs. ..
  • HIGH PERFORMANCE ANODE (Exclusive to Hilltop Solar): Extremely pure copper (greater than 99.95%) with silver with no impurities. Hilltop Solar anodes contain billions of copper-silver ions per anode and designed to maximize ionization capacity to add maximum possible ions into water to save on chlorine. Anode, basket and wing-screw guaranteed to fit floatron branded solar ionizer unit..
  • DO NOT CLEAN ANODE: Solar Ionizer unit cleans the anode automatically during the ionization process. Wattage from solar ionizer is applied at center of anode and this cannot be cleaned. Therefore cleaning the outside an anode with any abrasive materials, the following results with NO BENEFITS will occur: 1. Frequent anode replacements 2. Significantly increase costs due to wasted mineral ions 3. D....
Check Stock

Replacement Anode High Performance (Read Description Before Buy) | Anode Dimensions - See Image 2 | Guaranteed to fit Remington Solar (See 3rd Image) | Copper-Silver(99.95% Pure) | Saves Chlorine

  • NOTE TO BUYERS - See Image 5: Competitors and Amazon Customers who do not read are posting false and misleading details on Amazon product reviews, that is not validated by Amazon . See image 5 for more details..
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace the anode with more than 80% mineral remaining on old anode. Anodes are sacrificial, and designed to degrade. If anode is looking new or barely degraded, Solar ionizer unit is inoperative. Solar ionizer unit will always ionize regardless anode condition, as long it is installed on unit. Common misconception to replace anode to get solar ionizer to function is an INCORRECT PROCEDURE..
  • DO NOT CLEAN ANODE: Any Solar Ionizer automatically cleans the anode during ionization process. Power from solar panel is applied at center of an anode that cannot be cleaned. Cleaning outside an anode with abrasive material(s), will result in NO BENEFITS other than:....
Check Stock

Vplus Set of 4 Iridium Spark Plugs and Ignition Coil Compatible with 2004-2018 Nissan Altima Versa Sentra Rogue Cube QX60 NV200 2.5L 2.0L 1.8L 1.6L UF549 & 9029

  • The Titanium-enhanced alloy on the ground electrode also increases durability, which is critical to minimize tip erosion and achieve the new Twin-Tip....
Check Stock

XMSJSIY Led Mist Maker, Indoor Fountain Foggers Water Pond Fog Machine Atomizer Air Purifier Humidifier for Birdbath Halloween and Holidays Decoration…

  • Fresh air: this is ultrasonic fogger, and keep the indoor air natural and fresh with LED is placed in a container with a water depth of 50-70mm, (the atomizing effect is best when the atomizing sheet is about 30~50mm away from the water surface..
  • The mist maker with beauty humidifying air function: turn water into fog, moisturize the air and continuously increase air humidity..
  • Led mist maker uses high frequency ultrasonic vibration to enter water and release a large amount of water mist, The evaporation capacity is about 350ml/h. 12 LED color lights automatically change color to create a dreamy atmosphere..
  • Safe use: the atomizer adopts 24V output voltage safety design and is equipped with intelligent sensor. Once the water level is lower than 1.38 inches and the water surface does not exceed the water level sensing switch, the power supply will be turned off automatically..
  • This atomizer adopts ceramic wafer. Compared with the traditional atomizer with nickel or titanium as electrode, the ceramic wafer has superior performance in protecting electrode, high electrode strength, not easy to scale and prolong service life..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Rv Heater Anode Rod 2 Pack Eau Magnesium Rv Hot Water Tank Anode Rod Suburban and Morflo - 9.25''Long & 3/4'' Thread - Long Lasting Tank Corrosion Protection

  • Rv water heater anode rod exclusive suburban anode rod absorbs the corrosive action accused by hot water and prolongs. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. The life of your water heater tank..
  • Made using high-quality magnesium. Our magnesium rod absorb oxidizing substances and all the contaminants in the water towards itself by electrolys, preventing the water tank from rusting in the metal water tank, ensuring your RV water heater lasting use. These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment..
  • The rv anode rod’s size and material type: magnesium anode rod, 9.25" long, ¾" threads, uses a 1-1/16’’ socket..
  • The rv magnesium anode rod fits for almost all water heaters including.
  • A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾" NPT Anode Rod Connection..
  • The rv magnesium anode rod should be removed from the water heater’s tank annually for inspection and replaced when more than 6” of core wire is exposed at either end of the rod. Pack of 2: Unscrew the anode rod to drain the ta....
Check Stock