Top Tires For Traxxas Slash 4x4 Reviews

CODA RACING RC Alloy Caster Block&Steering Blocks for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),5x11x4mm bearings(2),10x15x4mm bearings(2),Bushing Sleeves(4),Screws(6),PTFE washers(2),Suspension Screw....
Check Stock

Rc Metal Steel 54T 32P Spur Gear with 15T/17T/19T Pinions Gear Sets Replace 3956 for Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL/Summit/E-REVO/T-Maxx/Rustler 4X4 VXL

  • Compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL /Traxxas 1/10 Summit/Trxxas 1/10 E-REVO/T-Maxx/Jato/Rustler 4X4 VXL/Summit..
  • The inner diameter of the 15T/17T/19T pinion gear set is:5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to....
  • compatible with 32-pitch, motor gear diameter: 45mm/1.77inch.
  • inner diameter: 11.9mm/0,47inch, replace for 3956..
  • Suitable for traxxas slash gears is made of heavy duty hardened steel, long time life span..
  • The speed depends on your gear ration. We provide three different teeth slash 4x4 gear set to make you more choice in gear ration..
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Orange.
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Vision Ed..
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832 1952

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks,#1952 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(2),10x15x4mm bearings(6),Bushing Sleeves(4),Screws(6),PTFE....
Check Stock

AIYIHOBBY Metal Steel 6878 Differential Gear Complete Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustle 4X4 Replace 6878

  • 【Compatible with】Compatible with Traxxas Rustler 4X4 / Slash 4X4 Platinum / Slash 4X4 Ultimate / Slash 4X4 VXL / Slash 4X4 / Stampede 4X4....
  • 【54T Spur gear size】6878 metal differential is 32P 54T 0.8 metric pitch..
  • 【32P pinions size】3 pinions(32P 15T/17T/19T pinions) Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures....
  • 【Hardened gears kit 】suitable for traxxa slash 4x4 slipper clutch is all metal internal gears for strength.Made of heavy duty hardened steel, long....
  • 【Free Style】The speed depends on your gear ration. We provide three different teeth pinion gear to make you more choice in gear ration..
Check Stock

6851x Replacement Compatible with Traxxas Slash 4X4 and Stampede 4X4 Models Front Heavy Duty Driveshaft Assembly

  • TRA6851X Compatible with Traxxas - Front Driveshaft Assembly, Extreme Heavy Duty.
  • Replacement part for these models: Compatible with Slash 4X4 Platinum.
  • Features: It will only fit front axles, either the left or right.
  • Includes: (2) Front Driveshaft Assembly. (CAUTION: If you take a car to a flying slope, there will be a risk of breaking once it falls, so you need to....
Check Stock

Traxxas 3637 Front Axles (pair)

  • Driveshaft is fully assembled and ready to install with included screw pin.
  • Fits right rear or left rear Slash 4x4 and Stampede 4x4 models.
  • Direct OEM replacement for stock driveshaft.
  • This product is made from high quality materials and designed for long-lasting performance.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Globact All Metal Steel 6878 Differential Gear Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustler 4X4 Replace 6878

  • Compatible with Traxxas Rustler 4X4 / Slash 4X4 Platinum / Slash 4X4 Ultimate / Slash 4X4 VXL / Slash 4X4 / Stampede 4X4 Unassembled Kit / Stampede....
  • 6878 Slipper clutch spur gear is 32P 54T 0.8 metric pitch..
  • 3 pinions(32P 15T/17T/19T pinions) Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to 3.175mm/0.125inch.....
  • All metal internal gears for strength.Made of heavy duty hardened steel, long time life span..
  • The speed depends on your gear ration. We provide three different teeth pinion gear to make you more choice in gear ration..
Check Stock

Hot Racing SLF4801 Adjustable Steering Bellcrank Servo Saver Tra RAL/Rus/Sta 4x4

  • Hot Racing is a United States based company.
  • parts are sourced from Chinese producers.
  • All Hot Racing upgrade parts are direct replacements for stock components.
  • This item works with: Traxxas Rally VXL, LCG Slash 1:10, Slash 4x4 all versions, Stampede 4x4 VXL, Telluride 4X4 trail rig.
Check Stock

Traxxas 5891 SCT Wheels SS Black Satin Paddle Tires

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

Globact Aluminum Adjustable Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts 7Pcs Blue

  • Aluminum Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts,Replacement of Traxxas #1935 3644 3745 3741X....
  • 1/10 camber link adjustable Length,Long Suspension Link 6 x linkages,length from 68 to 88mm,(center to center),Short Suspension Link,1 x....
  • Compatible with traxxas slash 4x4 links package Include:7 x Adjustable Metal Links,14 x Screws and 8 x Nylon Lock-Nuts..
  • Slash 2WD Link must Note: 1. The Link Rods is installed on the chassis of the remote control car and fixed with screws to solve the loosening problem.....
Check Stock

RCAWD Big Bore Shock Absorber Damper for 1/10 Traxxas Slash 2WD, Hoss, Rustler 4X4 VXL,Slash 4X4, Bandit, Ford, Nitro,Stampede Upgrades, RC Shocks Front Rear Aluminum Parts #5862 Black

  • 【Compatible with】: Full aluminum 5862 RC Shocks for 1/10 Traxxas Hoss 4X4 VXL, Rustler 4X4 VXL, Slash 4X4 Platinum, Slash 4X4 Ultimate, Bandit VXL, Bandit, Ford F-150 Raptor, Ford Fiesta ST Rally, Nitro Rustler, Nitro Slash, Rustler 4X4, Rustler VXL, Rustler, Slash 2WD Unassembled Kit, Slash 4X4 VXL, Slash 4X4, Slash VXL, Slash, Stampede 4X4, Unassembled Kit, Stampede 4X4 VXL, Stampede 4X4, Stampede VXL, Stampede. Replacement for # 5862..
  • 【Spec】:Big bore front and rear rc shock absorber Damper 4pcs tame the toughest terrain with their silky-smooth damping performance. The all-inclusive kit contains 90mm front shocks, 100mm rear shocks( both eye to eye length), ride height spacers 1mm(4pcs), 2mm(4pcs), 3mm(4pcs) , 4pcs Balls, 8pcs Hex hub screw 3*16, 8pcs Hex hub screw 3*14..
  • 【A little oil Pre-filled & Adjustable Threaded Shock Collar & Spring】Threaded Shock Collar - threaded shock bodies provide the perfect blend of scale realism and added spring adjustabilty.Features threaded shock collars for fine-tuning of vehicle ride height.And small oil has been pre-filled, you can add oil according to your needs..
  • 【Lightweight Aluminum& CNC Machining】: Hard-anodized colour, CNC machined PTFE-coated hardened alloy 6061-T6.
Check Stock