Top Tile Hole Cutting Reviews

JINGLING 2.5mm 3/32\ inch Diamond Small Drill Bit Hole Saw Masonry Tools for Glass Tile Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 6mm 1/4\ inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs

  • Hole/Outer Diameter: 6mm (close to 1/4").
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 3 mm 1/8' inch Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter Tools for Glass Marble Tile Granite Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

YALUSO Concrete Grinding Wheel 3Pcs 4-1/2' Double Row Diamond Cup Grinding Wheels, 12-Segment Turbo Row Wheel, Diamond Circular Blade Set for 4-1/2' Angle Grinder/Masonry/Granite/Marble/Concrete

  • Package Include: Our set includes 3Pcs 4-1/2" (115mm) grinding discs with 7/8" (22mm) abor hole, fit for 4-1/2" Angle Grinder. Includes 1 x 12-segment diamond grinding turbo row cup wheel, 1 x double row segment diamond grinding cup wheel, 1 x diamond circular blade for dry/wet cutting. Every disc comes with 2 types of silver rings (22mm to 16mm(5/8"), 22mm to 20mm), help you cope with different occasions..
  • Premium Diamond Material: Our grinding cup wheels are constructed of high concentration of diamond segment and precision stamping steel base plate, rust and corrosion resistant. Large diamond grind segment for more aggressiveness..
  • Exhaust Hole Design: The cup grinding wheels features air holes, designed to maintain and cool the cutting pattern and reducing wear.
  • Quick Grinding & Cutting: Provides with a fast cutting effect on masonry, stone, and concrete. High diamond concentration for long durability and aggressive material removal performance..
  • Diamond Saw Blade for Masonry: Turbo rim for smooth & fast cutting of masonry, concrete, pavers, terrazzo, roof tile. Universal for dry or wet cutting. Designed as thin kerf, it can increase the cutting speed while minimizing dust..
  • Wide Application: Our diamond grinder cup wheel is used for dry/wet grinding....
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Milwaukee Electric Tool 49-56-0305 Recessed Light Hole Saw, 6-3/8\ D

  • For best results, 600 RPM is recommended.
  • 6-3/8 in. diameter 1-3/4 in. depth of cut.
  • For cutting through drywall, plaster, acoustical tile, ceiling tile and stucco with wire mesh backing.
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

3 Inch Diamond Saw Blade for Porcelain Tile Granite Marble Ceramics Cutting(5/8 Arbor)

  • Segments Height 8mm, Hole 16mm(5/8")-22.23mm(7/8").
  • HIGH GRADE QUALITY: Hot pressed provides increases durability and long life.
  • SPECIAL: Can be used Dry/Wet, desiggned to provide fast, smooth cutting in a variety of material.
  • VERSATILE: The super thin diamond cutting disc Professional grade for porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board. It will be a perfect partner for tile installers and general homemade DIYers.
  • APPLICABLE MODELS: Suitable for tile saws, circular saws and hand-held grinders.
Check Stock

Delta Diamond Boss Hog Supreme Mesh Turbo 10 Inch Super Thin Tile Saw Diamond Blade, 5/8" Arbor, Wet/Dry Cutting Porcelain & Ceramic Tile, Stone, Granite, Marble (10")

  • SUPREME GRADE DIAMOND BLADE - Boss Hog Supreme uses supreme grade concentration of diamonds offering the best possible cutting solution for clean, fast, efficent cuts..
  • MESH TURBO RIM - Updated rim design offers fast and smooth cutting while the reinforced center adds stability to prevent wobble or vibrations..
  • HIGH PERFORMACE - Fast cutting with long life on a wide range of materials including porcelain tile, ceramic tile, granite, marble, slate, terrazzo, engineered stone and similar materials..
  • SPECIFICATIONS - Blade is 10" diameter X .055 thick and has a 5/8" arbor hole that fits on most tile saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

PHITUODA 15pcs 5/16-Inch / 8mm Diamond Drill Bits, Small Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • Package Included: 12 x Diamond Drill Bits. Cutting Hole Diameter is 5/16" / 8mm, Shank Diameter is 7/32" / 5.49mm, Total Length is 2" / 50.9mm..
  • Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life..
  • Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • Multiple Applications: The diamond drill bit can remove a complete 8mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the cu....
Check Stock

PHITUODA 6 Inch / 150mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 6" / 150mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.22" / 56.35mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 150mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you ....
Check Stock