Top Three Jaw Puller Reviews

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • 【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable..
  • 【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable..
  • 【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life..
  • 【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation met....
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

KUNTEC 3 Jaw Inner Bearing Puller Heavy Duty Pilot Sleeve Gear Extractor Internal External Pulling for Motorcycle Wheel Car SUV

  • 【Strong Material】3-Jaw Inner Bearing Puller Tool is constructed from carbon steel, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings..
  • 【Well Equipped】3 Jaw Inner Bearing Puller removes bearings, pump bearings, bushings, removes all sleeve type bearings with 1/2"-2" inside diameter.
  • 【Advantage】The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot..
  • 【Labor Saving】Structure design, gently turning the small wrench can produce a strong pull force.
  • 【Wide Application】3 Jaw Bearing Puller is designed for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing, generator bearing, machine bearing etc.
Check Stock

GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627

  • Ratcheting pullers have a time-saving, indexing jaw design.
  • Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help.
  • Pullers can also be converted to two- and three-leg pullers.
  • Jaws can be reversed from external to internal style in seconds.
  • Maximum spread of 3-1/4 inches on 2 ton puller.
  • Maximum spread of 5 inches on 5 ton puller.
  • Includes blow mold case for storage and organization.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ARES 15036 - Reversible 2/3 Jaw 2-Ton Ratcheting Gear Puller - Chrome Moly Steel Construction - 2-Inch to 3-Inch Adjustable Range - Removes Gears, Pulleys, and Flywheels

  • ITEM SPECIFICATIONS: Our 2/3 Jaw 2-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 2 to 3 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation..
  • DESIGN CONSIDERATIONS: The 2-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a reversible gear puller or a 2-jaw gear puller in no time, and the finely threaded center screw allows for enhanced pulling power..
  • COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ratcheting Gear Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part ....
Check Stock

ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece

  • Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
  • Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
  • Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
  • Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
  • This is a must have for anyone servicing vehicles.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

  • UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
  • BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
  • 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
  • REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
  • TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock