Top Threading Insert Reviews

THINBIT 3 Pack STTD2 'S' Series, Uncoated Carbide, Threading Insert for 15 to 56 TPI in Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Uncoated DURA-MAX 2000 carbide threading insert for steel, cast iron and stainless steel with interrupted cuts..
  • 15 to 56 TPI (threads per inch). 60 degree included angle. Centered orientation for threading within .046" of a shoulder. Internal threading with 1.250" minimum bore..
Check Stock

HHIP 2301-3016 S16T-TNER3 Internal Threading and Grooving Tool Holder

  • Excellent all-purpose system for threading and grooving.
  • Very strong insert design and wide insert selection and range.
  • Clamping system draws the insert consistently back into the pocket for superior repeatability.
Check Stock

HHIP 2301-3108 TNSR08-2V Notch Style External Threading and Grooving Tool Holder

  • Excellent all-purpose system for threading and grooving.
  • Clamping system draws the insert consistently back into the pocket for superior repeatability.
  • Fully interchangeable with other similar "notch" type tools and inserts.
  • Can be used with our right hand notch T/NT-2R #6062-5001 threading and T/NG-2 grooving inserts.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock

Zouzmin 1/2\ 5/8\ Boring Bar SNR0013M16+SER1616H16 Lathe Internal Threading Inserts Turning Tool Holder with 5pcs 16ER AG60+5pcs 16IR AG60 Carbide Turning Inserts External/Internal Threading Inserts

  • Model : 16ER / 16IR AG60 threading insert (Right /Left cutting ).
  • Blade length:16mm, 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm..
  • Carbide with TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
  • Design for stainless steel and steel parts, macthing for Threading tool holders.
  • Package include: 5PCS 16ER AG60 + 5PCS 16IR AG60.
Check Stock

GBJ 1/2\ SNL 0013M16 Left Hand Internal Threading Boring Bar with 10pcs 16ER AG60 3/8\ Carbide Inserts External Carbide Threading Inserts

  • Model Style - Threading Holder: SIR-0625-P16.
  • Product Included: One Insert, Screw and Key T15.
Check Stock

5 PC 1/2'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • -5 pcs of TCMT3252 insert with chipbreaker, C6 Carbide grade for tool steel.
  • -Style included: AR - right hand, AL - left hand, BL - left hand 15 angle, BR - right hand 15 angle, style E - threading tool 30 angle.
  • -2 each Style A 0° for Turning, Facing, Boring, and Chamfering, 1 pc of left hand and 1 pc of right hand.
  • -2 each Style B 15° for Turning, Facing, Boring or any lead angle can be used , 1 pc of left hand and 1 pc of right hand.
  • -1 each Style E 30° for Turning, Facing, Boring, Chamfering, Threading and "V" Grooving.
Check Stock

10PCS 16ER AG60 / 16IR AG60 CNC Lathe Indexable Threading Carbide Insert Blade (16ER AG60)

  • Model : 16ER AG60 threading insert (right cutting ), Material: carbide.
  • Pitch : AG60 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm..
  • Coating : Nanostructured TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
  • Advantages : Excellent anti-built-up features and chipping resistance, suitable for semi-finishing and finishing of steel parts. If you need a indexable turning tool that matches the insert, search for ASIN：B07FF8VFRW ，B07FDWYHGC.
Check Stock

Yoursfs Moustache Tie Clip for Men Beard Silver Color Tie Bar Pinch Cool Business Wedding

  • ★YOU WILL GET: 24 different characters of Beard Viking Rune Beads, 6 PCS Pull Hair Pin Quick Beader, 100 PCS Black Rubber Bands and a Bag, the bead size is 0.51 inches high, 0.31 inch outside diameter, 0.24 inside diameter inch.
  • ★EXQUISITE DESIGN: Rune Viking long hair beads are designed with exquisite characters, the size is suitable for your beard, can be well matched with your hair and beard, making your appearance more gentle and beautiful.
  • ★DURABLE MATERIAL: The Rune Celtic beard is made of zinc alloy, its inner surface is smooth, the edges of both ends are polished to prevent scratching.
  • the threading tool is made of high quality plastic, soft and durable, foldable, durable.
  • ★HOW TO USE: First use one hand to hold the beard beads, the other hand put the hair in the circle of the threading needle, then insert the hair or beard into the hole of the beard bead through the tip of the threading needle, and finally gently pull the end of the hair Through beard beads.
  • ★WIDE RANGE OF APPLICATIONS: The DIY beard and bead set that can be used to weave hair, dye hair, weave beards, pendants, bracelets and accessories is beautifully designed and is a good choice for fathers or friends.
Check Stock

Bench Pipe Vice Yoke Hinged Clamp on Type Threader Pipe Plumbing Vise Tools #3 SIZE: 1/2\ - 4-1/2\ (12-115mm)

  • [Material]: It is made of forged steel, and its surface coating is fire engine blue paint..
  • [Structure]: Yoke is made of self-locking hinge construction.
  • [Application]: Designed for cutting and threading pipes. The hinged pipe wrench can clamp any size pipe from 1/2 inch (12.7 mm) to 4.33 inch (110 mm). The wide threads on the lock-down screw provide plenty of torque to hold the pipe in place whether you're cutting or threading..
  • [Easy to use]: The locking hinge makes it easy to insert and remove long pipes without the need to pass through..
Check Stock

24 PCS Viking Hair Beads Beard Hair Beard Beads 6 PCS Pull Hair Pin Quick Beader 100 PCS Black Rubber Bands and a Bag

  • ★YOU WILL GET: 24 different characters of Beard Viking Rune Beads, 6 PCS Pull Hair Pin Quick Beader, 100 PCS Black Rubber Bands and a Bag, the bead size is 0.51 inches high, 0.31 inch outside diameter, 0.24 inside diameter inch.
  • ★EXQUISITE DESIGN: Rune Viking long hair beads are designed with exquisite characters, the size is suitable for your beard, can be well matched with your hair and beard, making your appearance more gentle and beautiful.
  • ★DURABLE MATERIAL: The Rune Celtic beard is made of zinc alloy, its inner surface is smooth, the edges of both ends are polished to prevent scratching.
  • the threading tool is made of high quality plastic, soft and durable, foldable, durable.
  • ★HOW TO USE: First use one hand to hold the beard beads, the other hand put the hair in the circle of the threading needle, then insert the hair or beard into the hole of the beard bead through the tip of the threading needle, and finally gently pull the end of the hair Through beard beads.
  • ★WIDE RANGE OF APPLICATIONS: The DIY beard and bead set that can be used to weave hair, dye hair, weave beards, pendants, bracelets and accessories is beautifully designed and is a good choice for fathers or friends.
Check Stock

Needle Threader for Hand Sewing 12 Pcs, TOOVREN Plastic Wire Hook Simple Threader for Needles Small Eye Needle Threader for Sewing Machine Needle Threader Tool for Sewing Crafting

  • Size & Package: One pack of 12 pcs needle threaders in Random Color. Each simple threader is 1.57 inch in length, 0.78 inch in width and 0.1 inch in thickness. The wire length is about 0.28 inch..
  • How to Use: 1. Insert the needle threader wire hook into the needle pinhole. 2. Hang the thread on the threader wire loop. 3. Pull the needle out and the threading is completed..
  • High Practical: Plastic sewing needle threader is used to solve the problem of difficulty in threading for people with poor eyesight. The threader works for any size of needles and thread, especially fits for threading those needles with small needle eyes, help to improve efficiency in needle work..
  • Easy To Store: Light, small and flat needle threader tool is not only good for use, they can be easily stored in a box or bag when not in use, saving space..
  • Best Gift for Homemade Lovers: Needle threaders for small eye needles are suitable for most sewing works, denim, silk, canvas and cotton, cross-stitch, decorative stitching, and embroidery. The threaders for sewing are good gifts for those who love to DIY crafts..
Check Stock

Flexible Plastic Drawstring Threader Tool, Easy Threader Drawstring Replacement Tool for Jackets Swim Trunks Pants Sweatpants Shorts Hoodies (Blue)

  • Package content：1 piece blue easy threader for threading.
  • Material：Easy Threader is made from high quality smooth plastic, flexible and soft, lightweight and durable, long time of use..
  • Save Time：Flexible drawstring threader can help you save a lot of time，which is convenient for you to thread thick or thin strings and no damage to your clothes.
  • How to use： You just need thread drawstring through larger eye or small eye according to the thickness or weave through both eyes to hold tightly, fix it and then insert the threader into your clothes until the complete string pass through.
  • Applications：Suitable for bags, totes, activewear, loungewear, etc. the easy threader can be applied for threading strings or ropes in daily life or dealing with emergencies when needed,too.
Check Stock