Top Threaded T nut Reviews

POWERTEC 71165 Aluminum Cam Clamp for Woodworking, 5/16”-18 Threaded Insert - 2PK

This is for a set of hold down clamp for use with T-slot track.
These clamps are useful in many woodworking & metalworking applications for work holding, positioning, and fixturing.
Puts clamping pressure anywhere along the flush-mounted T-slot T-track.
Slides into T-track & quickly secures with the turn of the hand knob nut.
Both T-screw and threaded rod are of 8mm threaded.

Check Stock

POWERTEC 71127 Jig and Fixture T-Track Hardware Kit w/Knobs and 1/4 -20 Threads | 128 Piece Set

Function: A comprehensive selection of hardware perfect for your creating your own t-track woodworking jigs and fixtures.
T-Bolts: (20) 1 in. / (20) 1-1/2 in. / (10) 2-1/2 in. / (10) 3-1/2 in. t-bolts - all precision machined of zinc plated hardened steel with 1/4-20 threads.
Knobs: (6) 2 in. t-shaped knobs / (4) 5-star insert knobs / (4) 5-star bolt knobs / (6) 4-star insert knobs / (6) 4-star bolt knobs / (10) 1 in. round knobs – all constructed of premium black, hardened plastic with threaded through inserts.
Threaded Inserts: (16) 1/4"-20 threaded inserts / (16) t-nuts.
Convenient Storage: (1) Plastic sorting case with assorted and movable dividers for quick access and easy hardware organization.

Check Stock

uxcell 1/4-Inch Flat Washer, Alloy Steel Black Oxide Finish Pack of 50

Fit for Screw Threaded Dia: 1/4"；Size: 15.7mm x 1.5mm/0.62" x 0.06"(OD x T).
Alloy steel black oxide finish for corrosion resistance, for outside applications, easy to install..
Prevents a nut, bolt, or screw from pulling through the material.
Apply for electrical connections on household and commercial appliances and in threaded bolt connections..
Flat washers are used under the head of a bolt or nut across the area of the support to prevent pull through..

Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..

Check Stock

POWERTEC QTN1108 Screw-On Tee Nut 5/16” x 18 8PK Zinc Plated Carbon Steel for Indoor/Outdoor Use - Screw On Flange T Nuts for Non-Rotating Fastening in Your Woodworking Shop

FUNCTION: By allowing you to easily add mating threads to your wooden furniture components, these premium, dependable screws give you an efficient way to quickly and securely attach your threaded components to your furniture and cabinets..
GREAT ADVANTAGE: With these handy screw-on t nuts, you can secure the mating threads from the attachment surface (rather than through the back, as is the case with regular t-nuts) essential when installing glides and caster onto the ends of legs, and fastening bedposts to beds..
SECURE & EASY INSTALLATION: Screw-on design makes for easy, precise non-rotating installation. Simply pre-drill the hole of the nut, accommodating the screw’s 15/32” OD. Three side protrusions on the OD of the screw further enhance positive lock against loosening, even with heavy-duty use. Install utilizing the 3 pre-drilled holes on the nut’s flange..
APPLICATIONS: Allows for the easy attachment of wooden legs, feet, glides, casters, levelers, and other components to your furniture, cabinets, shelves, and more. This nut inserts flush to the mating surface to ensure a polished look to your finished pieces..
COMPATIBILITY: Works with 5/16”-18 threaded bolted components.

Check Stock

Glarks 120Pcs M6 M8 M10 Brad Hole Tee Nut with Screws Assortment Set Zinc Plated Carbon Steel 3-Hole T-Nuts Furniture Hardware Flange Insert Female Thread for Wood Furniture

♛【Package Include】: This brad hole tee nut set include 30pcs M6 M8 M10 T-nuts, each for 10pcs, which outer diameter is 36.3mm/1.43". As well as 90pcs mounting screws for your installation on wood furniture..
♛【Premium Material】: The T-nuts are made of high-quality carbon steel, it has higher strength. With zinc plated on the surface gives it strong anti-corrosion and anti-rust performance, can be used for a long time..
♛【Stable Flange Base】: Compared with ordinary nuts, three-hole T-nuts have better fastening effects, the screws used for fixing can strongly support the base. so they can be used for heavy furniture..
♛【How to Use】: You need to drill a hole in advance, insert the nut part into the hole, and then fix the nut with self-drilling screw. Finally, install the threaded screw into the nut. Please confirm the size of the nut to be installed in advance..
♛【Widely Application】: These T-nuts can work both indoors and outdoors, and are most suitable for wooden materials. It can be used to install furniture legs for beds, tables, closets, and can also be used to hang chandelier..

Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.

Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....

Check Stock

DCT Tee Bolt Set – 20 Pack 1in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

...ture bolts and barrel nuts are ideal when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels.
BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
Zinc-plated for resistance to rust and corrosion.
Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten.
PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1 inch (2.5 cm) and a thread per inch of 20.
The diameter of the bolt stem is 1/4 inch (.6 cm).
EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).

Check Stock

80/20 Inc 3393 10 Series Bolt Assembly 1/4-20 x .5 Button Head Socket Cap Screw BHSCS and Slide-in Economy T-Nut 25 Pack

Includes 25 Bolts and 25 T-nuts (1/4-20 threaded).
Included T-nuts each measure .443" wide x .09" x 1" long.

Check Stock

POWERTEC 71414 24-pc Aluminum Quick Release Corner Framing Clamp Kit

INCLUDES: (8) Threaded rods,(4) Quick release threaded nuts, (4) Threaded connector nuts, (4) Keeper nuts, (4) Right angle corners, and Instruction manual.
FUNCTION: Clamps all styles of picture frames up to 45-1/2” max – tightening all four corners independently for dedicated pressure.
VERSATILE: Perfect for an assortment of applications, including picture frame making, crafting cabinet drawers, clamping small boxes and furniture.
FEATURES: Quick release components with knurled solid brass quick nuts for fast and easy adjustment, right angle corners that give optimal corner clearance for gluing and other requirements.
PREMIUM BUILD: This picture frame miter clamp set is made with lightweight extruded aluminum, able to distribute a higher strength to weight ratio for your picture frame and project clamping.

Check Stock

S erounder Hold Down Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Tool(T Screw and Plastic Knob Nut Just)

✔Scope of Applications：The T-slot clamp is ideal for fixing, positioning and fixing workpieces in many woodworking or metalworking applications, including planers, drilling machines, CNC, table saws, fixtures, panels, vertical milling machines, etc.
✔Easy to Install：The hold-down clamp is easy to install, and the flush pressure is applied to any position along the flush-mounted t-slot t-shaped track. Slide into the t-shaped track and fasten it by turning the knob nut.
✔Multifunctional Usage：This is a set of compression fixtures for t-slot rails. These t-track hold-down clamps can be used in many woodworking and metalworking applications for workpiece fixation, positioning and fixing.
✔Premium Materials：Our t-track hold-down clamp is made of high-quality metal materials, sturdy and durable, and has a long service life. Exquisite craftsmanship and exquisite operation ensure its super durability.
✔What You Get：You will receive 1 x whole clamps set (threaded rod, t screw, knob nut, slide block, washer, clamp board) or 1 x t screw and plastic knob nut just.For a better customer experience, we will optimize the product from time to time.

Check Stock

HELIFOUNER 1280 Pieces M2 M3 M4 M5 Phillips Pan Head Machine Screws, Flat Washers and Nuts Assortment Kit, 304 Stainless Steel

Great kit for the home or workplace. Contains an assortment of sizes of machine screws..
These machine screws are used with nuts or directly into a female threaded These machine screws are used with nuts or directly into a female threaded receptacle to fasten metal parts together..
Machine screws are used for many types of electrical connections and terminal strips. They are installed into an existing or predrilled, pre-tapped hole and are fully threaded. If nuts are needed, use with nuts of the same material, finish, and threading for proper fit..
The 6 most commonly used sizes are 6#*3/4、6#*1、6#*1-1/4、6#*1-1/2、6#*2、6#*3..

Check Stock