Top Threaded Insert Removal Tool Reviews

Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case - 648637

Strong and dependable enough to last a lifetime.
Kit services: many automobiles and light trucks.
Tool set for removal and installation of harmonic balancers that have threaded holes.
Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
Adapters included: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/416.
Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.

Check Stock

Harmonic Balancer Puller Kit, Car Replacement Engine Crank Pulley, Portable Harmonic Balancer Puller Without Threaded Hol，Compatible with GM/Jeep/Chrysler, etc

【Time-Saving Tool 】 Compatible harmonic balancer pullers (without threaded holes) do not require disassembly of the radiator. This is a unique buckle attachment that can be removed without fixing the tie rod to the balancer. Make the damper easy to disassemble..
【Wide Compatibility Crankshaft Puller】Compatible with GM engine models: 5.3 L, 5.7 ls1 6.0 LS2 6.2 LS3 7. Engine models compatible with Chrysler/Dodge: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
【Crank Pulley Removal Tool with Clamp-in Design】 The tool adopts a "clamp-in" design, which can be disassembled without fastening the puller to the balancer, and is compatible with Jeep/GM/Chrysler/Dodge, etc..
【Balancer Puller Made of Carbon Steel 】Using special carbon steel material, the surface is sprayed with anti-corrosion paint, which is corrosion-resistant and durable.The tool has enough weight and strength to ensure that it will not break during use. Save unnecessary cost, time and energy, remove dampers or harmonic balancers. remove dampers or harmonic balancers..
【Easy-to-use 25264 Harmonic Balancer】Remove the harmonic balance....

Check Stock

Powerbuilt Harmonic Balancer Puller Set, Remove and Install, Balancers on Car Vehicles and Light Trucks, Thread Adapters - 648994

Removes and installs harmonic balancers on many automobiles and light trucks.
Durable storage case with step-by-step instructions.
Kit includes press and multiple adapters for pulling and pressing balancers.
Precision-built to meet or exceed ANSI standards.
Tool set for removal and installation of harmonic balancers that have threaded holes.
For use on balancers found on many automotive and light truck applications.
Kit 64 includes 42-Piece for removal and installation of harmonic balancers that have threaded holes.

Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..

Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..

Check Stock

12 Pieces Faucet Aerator, 4 Sizes Faucet Replacement Part Insert Aerator, 4 pcs Faucet Cache Aerator Removal Tool Key Wrench, Male 16.5 18.5 21.5 24mm Tap Aerators, Flow Restrictor

【12 Pcs of 4-Sized Faucet Aerator Insert Parts】This Cache Aerators Replacements includes 12 pieces faucet filter cache aerator, covering 4 sizes recessed aerator key for Male 16.5mm/ 18.5mm/21.5mm/24mm Faucet Thread Size..
【4 Pcs Faucet Aerator Removal Keys】Great aerator removal tool for faucet aerator replacement. Fit for Male 16.5mm/ 18.5mm/21.5mm/24mm insert aerator..
【High Quality ABS Material】Cache faucet aerator keys with aerator removal tool are made of durable ABS, strong and sturdy. Reliable material with good workmanship ensures it can last for a long time use..
【Easy to Install】Sink aerator set with water keys comes with wrench tools allow you to complete removal and installation in minutes. No need to have a plumber. Faucet aerator removal tool is easy for your daily use..
【Faucet Aerator Wrench】12 Pcs aerator replacement parts and 4 pcs removal tool can be fitted to kitchen sink faucets, bathroom taps and lavatory faucets spout head, compatible with Neoperl, Moen, Kohler, American Standard, Danze, and Groche Cache Faucet Aerators..

Check Stock

Fafeicy 10Pcs Thread Inserts Kit, Male Female Thread Reducing Nut, Thread Locking Inserts, for Thread Repair Tool, Nut

A threaded insert can be used to repair the threaded hole in a costeffective manner when a thread error occurs, or a damaged female threaded hole is repaired..
Widely used in aviation, automobiles, steam turbines, electronic communications, computers, lamps, molds, mechanical equipment and radiators..
The thread reducing nut is an effective thread repair tool set, including 10pcs threaded inserts, simple to install..
The thread repair tool adopt goodquality stainless steel to ensure the durability, and stability of the product..
Moderate size: Female thread M6x1.0mm, Male thread M10x1.5mm. Stable structure, excellent performance , and has a long service life..

Check Stock

Park Tool BBT-69.3 16-Notch Bottom Bracket/Lockring Tool — Fits Shimano, SRAM, Chris King, Campagnolo, etc.

A precision-machined tool for removal and installation of select bicycle bottom brackets with a 16-notch tool fitting.
Compatible models include Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups.
Fits select threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Surly, Wheels, Fulcrum, and others.
Fits 16-notch Bafang BBSH, BBS02 mid-drive motor lockrings.

Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....

Check Stock

POWERTEC QTI1004 Threaded Inserts for Wood Furniture | Zinc Plated | 3/8”-16 Internal Threads | 18mm Length – Pack of 50

INCLUDES: (50 pack) 3/8-16 Threaded Inserts (also referred to as Insert Nuts).
FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71380(not included) after drilling the appropriately sized hole.
SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 3/8”-16, Total Length 0. 709 (18mm).

Check Stock

POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4”-20 Internal Threads | 11.9mm Length – Pack of 50

INCLUDES: (50 pack) 1/4-20 Threaded Inserts (also referred to as Insert Nuts).
FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71383(not included) after drilling the appropriately sized hole.
SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 1/4"-20, Total Length 0. 468”(11. 9mm).

Check Stock

OTOOLWORLD Watch Case Opener 5700 and Closer Watch Tool watchmaker tools

PROFESSIONAL WATCH BAND LINK REMOVER – Selizo watch link remover kit comes with a metal watch band link remover, 10pcs spare pins and a piece of cleaning cloth. It is great for watch link removal, watch sizing and watch repair.
ALL-METAL WATCH LINK REMOVAL TOOL – The watch link remover is made of steel and with 10 extra pins for replacement, makes it strong and durable for long time use.
EASY TO USE – The watch link remover kit is designed with a round adjustable platform to allow proper positioning for probably any thickness of bracelet and the threaded push rod to remain level as it moves forward. With this watch tool, you can size your own bracelets quick and easy.
FIT FOR DIFFERENT SIZES – This watch band removal tool is great for removing and inserting spring bars straps, and widely used in all kinds of watch band replace, watch bracelet repair and other watch repair project.
SAVE YOUR TIME AND MONEY – The watch link removal kit is handy and effective, you can manage to remove links in the watch strap and rejoin with no problems with this little gadget.

Check Stock

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

remove and replace all 4 jaws in less than a minute.
jaws will snap into place for a secure mount.
use the included jaw removal tool to pop them off the chuck body.
Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.

Check Stock