Top Threaded End Tube Reviews

Gator Frameworks Accessory Mount for Microphone stands; Fits up to 4 Accessories ( GFW-MIC-MULTIMOUNT )

  • Mount with multiple threaded ends to add up to 4 accessories.
  • Clamps to tube and features (4) 5/8-27 male mic thread adapters.
  • Securely attaches to tube diameters ranging from 15mm -22mm.
  • Made from machined aluminum with black anodized finish.
  • 5/8-27 male threads at boom end with jam nut.
Check Stock

Round Plastic Threaded Tube Inserts - 4 Pack Threaded 1\(OD) Round Plastic Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts Round Tubing Inserts

  • 4 Pack Round Plastic Threaded Tube Inserts, Threaded Tube Ends.
  • Round Tubing Threaded Insert fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Threaded Round Plastic Tubing Insert with 1/4-20 metal threads that supports for smooth and frequent adjustments.
  • Threaded Inserts for Round Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

SVBONY SV157 Extension Tube 1.25 inch Optical Length 40mm Total Length 70mm Extension Tube for Telescope 70mm

  • SV157 1.25" extension tube can help your eyepiece and camera focus well.
  • SV157 1.25" extension tube is threaded at the end to accommodate a standard 1.25" filter.
  • SV157 1.25" extension tube is made of all-metal material and has a long service life.
  • The inside of the SV157 has full threads to reduce reflected light.
  • with a brass compression insh to prevent the marring of your telescope accessories.
Check Stock

uxcell 50pcs Rubber End Caps 5mm ID Vinyl Round Tube Bolt Cap Cover Screw Thread Protectors Black

  • 【5mm INNER DIA】 Round end cap cover fits 5mm dia round tube or screw or pipe.
  • 【GOOD PROTECTOR】Our flexible end caps prevent scuffs on kitchen or wood floor,for metal chair tips, furniture, chair feet, table legs or tips,....
  • 【FLEXIBLE VINYL MATERIAL】 Thread protector cover is made of vinyl rubber material, flexible and insulated.
  • 【SIZE SELECTION】Because rubber material is soft and elastic, we recommend choosing rubber end cap that is slightly smaller than the outer diameter....
  • 【WIDELY APPLICATION】 Perfect for covering screws or other threaded parts, round tubing, furniture feet and so on.
Check Stock

4 Pcs 50mm (2 Inch) Round Plastic Plug ,Round Tubing Black Plastic Plug，Pipe Tubing End Cap for Round Tube Furniture Finishing Plug

  • ...r-resistant. Waterproof and compressive wear proof..
  • Uses:black plastic cap Provides long lasting protection， great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliderschair leg protectors, patio furniture inserts, and much more..
  • The 2 Inch round threaded inner plug can be used as a durable solution for home or outdoor projects, including replacement of fence/door railing covers, trailer frame ends, rod tube rod caps, wrought iron steel decorative plugs or any round opening. Not easy to deform, firmer, not easy to fall off, easy to install..
  • We believe that our round Tubing Post End Cap, will exceed your expectations. If you have questions, please contact us any. We will try our best to solve your problems..
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

6602 Differential Deflecting Bearing Preload Wrench fit for Chrysler/Dodge Vehicles Axle Tube Quick Delivery Equipment Hand Tools

  • Fit for: Works on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles.
  • This tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket).
  • Made of standard No.1045 steel with high strength and toughness for durability and perfect match.
  • It will perfectly fit inside axle tube to access the threaded adjusters with sleek design, and there is about 6″ of heat shrink on the wrench-end which protects the oil seal and wheel bearing from damage when using.
  • Package included: 1pcs Differential Bearing Preload Wrench ( 2 year warranty).
Check Stock

Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 3/8\ Tube OD (Pack of 5)

  • Cap fitting for closing the end of a male-threaded flare tube.
  • Forged nuts for refrigeration applications.
  • CA360 brass for strength and resistance to corrosion.
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C).
Check Stock

Control Devices - CA12-1A Brass Load Genie Unloading Check Valve 1/2 Tube Comp x 3/8 NPT Male

  • Unloading check valve releases trapped pressure in a compressor head.
  • Made from brass for higher corrosion resistance than steel.
  • Tube compression connection on one end and female NPT threads on the other for connecting to male threaded pipe.
  • Maximum working temperature of 400 degrees Fahrenheit.
Check Stock