Top Threaded Bushing Reviews

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

SALECOM 3X DPDT 6 Pin 3 Position ON/ON/ON Guitar Mini Toggle Switch Car/Boat Switches

  • Mini Toggle Switch threaded bushing height: 5/16".
  • Mini Toggle Switch 3 Position ON/ON/ON (3A 250VAC/5A 125VAC).
  •  Comes with 2 nuts, a flat and a lockwasher.
  • These are good quality toggle switches, not cheap and inferior toggle switches.
  • Please be sure to verifgy the dimensions carefully before you order the item.
  • Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Artiwell Trip Lever Tub Trim Kit Set With Trip Lever Overflow Face Plate, Trip Lever Bathtub Drain with Strainer, Overflow and Matching Screws (BRUSHED GOLD)

  • ... to perfectly match with your faucet and the rest of your bathroom décor..
  • HIGH QUALITY MATERIAL: Durable brass drain construction provides strength and durability to this bath tub drain trip lever trim kit with overflow plate, Corrosion-Resistant Finish..
  • STANDARD DESIGN: Designed to fit most tub and baths with the threaded adapter bushing fitting 1-1/2 inch ,1-3/8” inch and 1-7/8” in bath shoe sizes. This Drain can fit both 1-1/2" coarse thread and 1-3/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-3/8" Fine thread..
  • FULL ACCESSORIES PROVIDED: Trip lever faceplate with 2 screws , Beehive strainer with screw, 1-3/8 in. Npsm (1-5/8 in. - 16 UNC) fine thread strainer body, 1-1/2 in. -11. 5 in. Npsm coarse thread adapter bushing, strainer washer and Brass Pin for connect the overflow faceplate and linkage(not included)..
  • TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional, national industry standards. We are proud of the products we sell, you will be too..
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

Continuous Sweep Mini Quartz Movement - Medium Shaft

  • Clock Movement Measurements: Total hand shaft length is 20.6 mm (13/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 7.9 mm (5/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 9.5 mm (3/8 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 9.5 mm (3/8 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand mounting hardware..
Check Stock

Amp handle, brown raised vintage

  • 100 ohm potentiometer with 1/4 Inch threaded brass bushing for mounting to amplifier chassis.
  • Adjustable level control (using flat head screwdriver). Includes mounting nut and washer.
  • Used as hum balance control in 65 Twin Reverb Machete, and Vibrasonic amplifiers manufactured from 1992-Present.
  • Top-quality potentiometers used on Fender amplifiers.
Check Stock

Kaiser rePRO RTX Camera Arm (205522)

  • Interchangeable threaded 1/4” and 3/8” bushing.
  • Camera mount horizontally adjustable with fine adjustment.
  • Camera mount with spirit level for fine adjustment.
  • Rotates 180° and can be fixed in any position.
Check Stock

Kaiser rePRO RA 101 Camera Arm (205523)

  • Interchangeable threaded 1/4" and 3/8" bushing..
  • The Package Height of the Product is 17.398 centimeters.
  • The Package Length of the Product is 9.906 centimeters.
  • The Package Width of the Product is 16.637 centimeters.
Check Stock

Cajun Bowfishing Spinning Reel Mount, Silver, One Size

  • For mounting a spin-casting reel to the bow stabilizer bushing.
  • Threaded end provides for a fishing rod attachment.
Check Stock

Cajun Bowfishing Reel Seat

  • Machine anodized hoods make this our toughest reel seat.
  • Threaded end provides for a fishing rod attachment.
  • Constructed of corrosion resistant material.
Check Stock

Do it Bathtub Shower Diverter Spout

  • Do it 5-1/2 In. Top Mount Chrome Bathtub Spout with Diverter..
  • Top mount threaded outlet for use with hand held personal showers..
  • Model 450677, 3/4" Female pipe thread inlet with 1/2" Female pipe thread bushing..
Check Stock

Oben QRA-A2 Quick Release Assembly with QR-10 Plate

  • Includes QR-10 Quick Release Plate, 3/8"-16 Threaded Mount with Bushing.
Check Stock