Top Thread Cutting Oil Reviews

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..

Check Stock

(200) 5/16-18x2 1/2 Flat Head Trailer Floorboard Deck Screw T40 Torx Plain

Diameter/Pitch: 5/16-18" Length Under Head: 3".
Threads: Type F Thread Cutting (Coarse), Full Thread.

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

1/8 HP Lathe BandSaw Machine Tool Circulation Coolant Pump, Immersion Length 180mm (7\), NPT 1/2\ Thread, Single 1 Phase 110/220V

Dark thread cutting oil for lubricating and cooling dies and cutting machines during threading process.
Mixture of sulfonated and chlorinated oils for high film strength.
Dark formula for high-speed cutting machines.
Anti-mist and non-staining for visibility.

Check Stock

uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

uxcell 1/2-20 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..

Check Stock

RIDGID 10883 Model 418 Oiler with Premium Thread Cutting Oil, Silver

ALL WEATHER PIPE THREADING OILER: Designed to increase productivity with its durable pump assembly and rust-resistant heavy-duty reservoir that won't warp, crack, or leak.
INCLUDED CUTTING OIL: Comes with 1 gallon of premium thread cutting oil to pair perfectly with the 1-gallon reservoir capacity.
ERGONOMICALLY DESIGNED: Features a 2-finger trigger mechanism and an anti-slip grip to efficiently help reduce user fatigue.
EASY AND CONVENIENT: Integral molded body eliminates leaks at the hose-reservoir connection while the fastener-less twist and lock drip pan easily locks in place.
HIGH-QUALITY CONSTRUCTION: Lightweight material that withstands abrasion, won't rust, and is so strong that under typical use, no dents will form on impact and no shape changes will occur over time.

Check Stock