Top Thread Cap Reviews

ZZJMCH 2 Pack 37mm Center Pinch Front Lens Cap Compatible with Olympus Canon Nikon and Other Brand of Lenses with 37mm Filter Thread, Replaces Olympus LC-37B Front Lens Cap

  • Compatible with any lenses with 37mm lens thread size, Please note your camera’s lens thread size will be marked somewhere on the lens barrel, such like Olympus 14-42mm II Lens,Olympus M.Zuiko Digital ED 45mm f/1.8 Lens,Lumix G Vario 12-32mm f/3.5-5.6 ASPH. Lens,Lumix G X Vario PZ 14-42mm f/3.5-5.6 ASPH Power O.I.S. Lens,etc..
  • Replaces Olympus LC-37B front lens cap or 37mm lens cap from other brands.CHECK YOUR LENS DIAMETER BEFORE PURCHASE.Your camera’s lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø37 = 37mm lens thread size..
  • This cap protects lens front from dust, moisture, direct sunlight and scratches.and also protects from scratches during storage and walking around. Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole..
  • Inlcudes 2 High quality plastic center pinch lens cap + 4 Universal elastic lens cap keeper..
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • ...ge]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel tank cap on the generator to prevent damage to the plastic thread on the fuel tank..
Check Stock

ChromLives Camera 52mm Lens Cap Center Pinch with Lens Cap Leash Hole Bundle Compatible with DSLR Cameras Nikon Sony Canon & Other DSLR Cameras UV Lens 52mm

  • The ChromLives camera lens cap is a great photography rig to protect the front portions of your camera camcorder lens from water, dust, and scratches..
  • 52MM LENS CAP- This is 52mm lens cap with lens cap leash Hole for ALL Lenses with a 52mm Filter Thread Front manual or autofocus, digital or film.Also attaches to filters, adapters, and lenses with or without hoods. CHECK YOUR LENS DIAMETER BEFORE PURCHASE. Your camera's lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø52 = 52mm lens thread size..
  • LENS CAP LEASH HOLE- A hole on lens cap for lens cap leash to prevent losses while still keeps the lens 100% sealed when mounted..
  • PINCH DESIGN- Easy to use. Center pinch design allows easy attachment and removal, even with a lens hood in place..
  • Made of high impact plastic for extra durability. Package includes 1*52mm Lens cap,1* Lens cap keeper line.（Please measure your camera len size before order.）.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock

#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw

  • Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
  • Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle Kit with Screw Collar Caps, Gasket Stopper,and 2 Kinds Gas Can Vent Cap for Most Style Gas Can, Highly Fitted, Smoothly Flow (4 Kit)

  • Gas Can Spout Replacement - Suitable for most 1/2/5/10 gal gas cans (not suit for Blitz gas cans)，we provide 8 Screw Collar Caps (4 Coarse Thread & 4 Fine Thread), 4 Spouts with rubber gaskets and plastic strainer, 4 nozzle caps with threads，2 kinds of gas con vent caps, and the drill bit required to install the gas discharge cap. A good universal gas can spout kit give your old cans new life..
  • High-quality Materials - These gas can pour nozzles and accessories are composed of high-quality plastic, the spout can be freely bent without breaking. they are light weight and easy to carry, environmentally friendly and long life. Thickened and widened rubber sealing gaskets allow gas can spout to fit perfectly with your gas can，there will be no oil overflow even in the case of transportation or the gas can is down..
  • 2 Types of Gas Can Thread Cap - The internal thread size of coarse thread cap and fine thread cap all are 1.75 inches, It can only be used for gas tanks with a tank mouth size of 1.75 inches. Please measure the size of your gas can mouth before purchasing. Perfect size, to ensure a tight fit between the collar cap and the gas can..
  • Unobstructed Flow Gas Can Nozzle Kits - We provide two gas can vent caps. Gas can vent caps-A is used for ....
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, As shown in the picture The internal thread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can repl....
Check Stock

waka Unique Design Lens Cap Bundle, 3 Pcs 67mm Center Pinch Lens Cap and Cap Keeper Leash for Canon Nikon Sony DSLR Camera + Microfiber Cleaning Cloth

  • READ BEFORE BUY: Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always proceeded by a "Φ" (diameter) symbol. For example: Φ58 = 58mm lens thread size..
  • Special design lens cap that keeps lens 100% sealed when mounted even there's a hole on it for cap keeper leash. Lens cap leash is neatly attached in cap hole instead of other ugly and easily fall off front adhesive tab lens holder..
  • Snap-on center pinch design allows easy attachment and removal, even with a lens hood in place..
  • Truly premium quality lens cap bundle to protect your lens from water, dust, scratches and losses. Ideal universal replacement lens cover for Canon, Nikon, Sony etc DSLR cameras..
  • Free premium quality microfiber cleaning cloth 6x7" included. NOTICE: 1) Cap keeper leashes are not attached on lens cover default. 2) For Canon 18-55mm lens please choose 58mm size. Please don't hesitate to contact us via Amazon message system if at any time you aren't completely happy with your purchased, we'll provide you a satisfactory solution..
Check Stock

3/8-16 x 1-1/2\ Socket Head Cap Screws Bolts, Stainless Steel 18-8 (304), Bright Finish, Fully Threaded, Allen Socket Drive, 20 PCS

  • The socket head cap screws are 100% Stainless Steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • Package Included: 20 x Socket Head Cap Bolts/Screws..
  • Socket Head Cap Screws are great to have around for use in wood and wet environments..
Check Stock

GAOAG 2 Pack 52mm Center Pinch Lens Cap for Nikon Canon Sony DSLR Camera Compatible with Nikon D3000 D3100 D3200 D3300 D5000 D5100 D5200 D5300 D5500 and Any Lenses with 52mm Filter Thread

  • This item compatible with Nikon,Canon,Sony Lenses with 52mm lens thread size,such as Nikon D3000 D3100 D3200 D3300 D5000 D5100 D5200 D5300 D5500,Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G lens,Nikon AF-S DX NIKKOR 35mm f/1.8G Lens,Canon EF-S 60mm f/2.8 Macro USM Lens,Canon EF-M 18-55mm f/3.5-5.6 IS STM Lens,etc..
  • This cap protects lens front from dust, moisture, direct sunlight and scratches.and also protects from scratches during storage and walking around..
  • Inlcudes 2 x High quality plastic center pinch front lens cap + 2 x Universal elastic lens cap keeper + 2 x Ordinary lens cap keeper..
  • Pinch the sides of the cap and snap it into place,center pinch design allows easy attachment and removal.The elastic loop goes around the barrell of your lens to protect lose a lens cap!.
  • Replaces Nikon LC-52 lens cap or 52mm lens cap from other brands.CHECK YOUR LENS DIAMETER BEFORE PURCHASE.Your camera's lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø52 = 52mm lens thread size..
Check Stock

YEQIN 2 Piece Spool Pin Cap #511113-456 for Singer Sewing Machine 2000 4000 5000 6000 9000 Series

  • Singer Sewing Machine Spool Pin Cap Fits Many 2000 4000 5000 6000 9000 Series.
  • A spool cap is the piece that attaches to the spool pin, that holds the thread in place and helps the thread properly unwind and not jump around while you're sewing.
  • New replacement spool pin cap. This fits 1/4" pin, outside diameter is about 1 3/4".
  • Fits Singer 2102, 2105, 2106, 2108, 2110, 2112, 2114, 2118, 2517, 4205, 4206, 4210, 4212, 4220, 4228.
  • Singer Spool Pin Cap Fits 6211, 6212, 6214, 6215, 6217, 7033, 9000, 9015, 9030.
Check Stock