Top Thermostat Housing Connector Kit Reviews

DREAPATS Weather Pack 4Pins Connectors Kit 20-14 AWG Waterproof Quick Locking Electrical Wire Harness Plug(5 Packs)

  • Each kit includes: 5 pcs male connector housing, 5 pcs female connector housing, 20 pcs male terminals, 20 pcs female terminals, 40 pcs silicon rubber cable seals..
  • DREAPATS wire connector designed with high quality Enhanced materials,which can be high temperature resistance,Operating temperature : -30℃~+180℃,long-term stable performance,high durability..
  • Waterproof cable connector will not be affected by water, dirt, fog, or other chemicals, convenient and safe.Perfect for car,motorcycle,truck,trailer lighting systems, marine, jet ski,quad bike, scooter, boat, and other wire connection..
  • Easy to install under soldering and crimpingm,lightweight..
  • Hole diameter of the black housing connector is 0.2"..
Check Stock

279769 Dryer Thermal Cut-Off Kit, 3387134 Dryer Thermostat & 3392519 Thermal Fuse for Whirlpool Kenmore Dryers 3390291 3977394

  • This kit fits specific Whirlpool manufactured dryer models including Amana, Jenn Air, Kenmore, Magic Chef, and Maytag..
  • 279679 Thermal Cut Off Kit replaces 279548, 2796769, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AH334278, AP3094224, EA334278, PS334278..
  • 3387134 Thermostat is an Operating Thermostat rated at L155*-25* differential, with a 250 Volt 2 Watt Heat Anticipator. The 2 outside terminals are 1/4″ male & the 2 inside terminals are 3/16″ male. Replaces part numbers 3387134, 3-6910, 306910, 3387135, 3387139, AP3131939, AP6008270, ET187, PS344510 and PS11741405..
  • 3392519 thermal fuse is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16″. Replaces part numbers AP3132867, 2986, 3388651, 694511, 80005, AH345113, EA345113, ET401, PS345113..
  • Package includes: 1 * 279679 Thermal Cut Off Kit, 1 * 3387134 Thermostat, 1 * 3392519 Thermal Fuse. ( Non-OEM ).
Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

  • Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
  • Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
  • Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
  • Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
  • Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.
Check Stock

Qiilu Engine Coolant Thermostat, Engine Cool Thermostat for Peugeot 206 306 307 806 1007 Bipper Expert 336N5 1336Q1 1336.N5

  • Fitment ---- The thermostat housing is designed specifically for for Peugeot 206 306 307 806 1007 Bipper Expert. Please carefully check the model of your vehicle with our fitment decription.
  • Replacement OE Number ---- The manufacturer part number of thermostat is336N5, 1336.Q1, 1336Q1, 1336.N5. Our product meets or exceeds OEM specification in manufacturing and materials.
  • Powerful function ---- Thermostat is based on the temperature of cooling water automatically adjust the amount of water into the radiator, change the water cycle range, in order to adjust the cooling capacity of the cooling system, ensure that the engine works in the appropriate temperature range.
  • Advanced technology ---- Engine Coolant Thermostat Apply the latest design and advanced technology, ensure thermostats control engine coolant and inlet temperature efficiently.
  • Premium quality ---- Engine Coolant Thermostat is made of high quality metal and plastic material, which features corrosion resistant and high temperature resistant.High quality aftermarket thermostat kit is a necessary part for your vehicle.
Check Stock

279838 Dryer Heating Element 279816 3977767 3392519 Thermal Fuse & Thermostat Cutoff Kit 5400W 240V for Whirlpool Kenmore Maytag Replaces # 3403585 279837 8565582 3398064 AP3094254 W10724237

  • Package Included: 1x 279838 Dryer heating element assembly, 1x 279816 Thermal Fuse & Thermostat Kit, 1x 3977767 high limit thermostat, 1x 3392519 Thermal Fuse..
  • ✅【Ideal Replacement】: Want new 279838 Dryer Heating Element Thermal Fuse Cutoff Kit that matches the original? This dryer Heating Element was specifically designed to look and function the same as the original on your Dryer. While this is NOT a genuine Whirlpool & Kenmore part, it is a direct replacement and it will appear, fit and work like the factory part..
  • ✅【Replacement Dryer Heating Element】 – This dryer heating element is made from high-quality materials and components. It also includes a two-pin connector that plugs directly into the appliance, meets or exceeds OEM standards, 100% tested before shipping. Replaces the component in your dryer. Helps to restore the functionality of a compatible machine when the electric dryer has stopped heating..
  • ✅【Compatible】: Designed to fit specific Whirlpool & Kenmore manufactured electric dryer models, also compatible Maytag, KitchenAid, Amana. In addition, the parts fit for Kenmore 1037777000 1037777020 1037777040 1037777060 Gas Range and Kenmore 1038017050 1038517050 Optional Continuous Clean Oven L....
Check Stock

ZOZOMOTORS Dual Electric Fan Relay Kit Radiator Electric Fan Thermostat Kit Temperature Sensor Switch 185 On 175 Off, Automotive 40 AMP Cooling Fan Relay Switch Kit 4 Pin, Dual Electric Fan Wiring Kit

  • Easy to follow wiring diagram simplify wiring your dual electric fans. RED to 12VDC Positive Battery Terminal, COFFEE to Fan Positive, BLACK to Ignition, GREY to Sending Unit per wiring diagram. Direct replacement part fits 10, 12, 14, and 16 inch cooling fans.
  • Temperature switch turns on fan approximately at 185 Degrees and Off at 175 Degrees. The temp sensor has a 3/8 inch pipe thread, and a 1/2 inch adapter included.
  • This electric cooling fan thermostat kit comes with everything you need, includes 40A relay, wiring harness, thermostat switch, 3/8 inch to 1/2 inch adapter, inline fuse holder, 2 20amp fuse, 1 spade connector for the temp sensor, 8 ring terminals, and 4 wire connectors.
  • The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket if needed. The thermostat MUST be grounded through the threads to the engine in order for it to work, and the engine MUST be grounded.
  • If you intend to mount high-profile fans, you could crimp or solder bigger wires to it. The 14AWG wires (15 amps) are not bigger enough for high amps draw.
Check Stock

279973 & 3392519 & 8577274 Dryer Thermal Cut Off Fuse Kit with Thermistor Control and Thermal Fuse Replacement Part fit for Whirlpool & Kenmore Dryers

  • ✅Package Includes: 1 x 279973 Thermal Fuse & Thermostat with Instruction Sheet, 1 x 3392519 Thermal Fuse, 1 x 8577274 Thermistor Control..
  • ✅279973 Thermal Fuse & Thermostat – Dryer high limit thermal fuse and high limit thermostat kit. Includes instructions..
  • ✅3392519 Thermal Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
  • ✅8577274 Thermistor Control – Dryer thermistor temperature sensor..
  • ✅Replaces Part Number – Thermal Fuse & Thermostat 279973 3391913 3404151 3404152 3977395 8318314 897710 AP3094323 PS334387 EAP334387. Thermal Fuse 3392519 WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519 PS11741460 AP6008325 2986 EAP11741460. Thermistor Control 8577274 WP8577274 3390292 3406294 3976615 772546 8577274 1181075 AP6013514 PS11746740 EAP11746740. the replacement part is a direct replacement for your dryer..
  • ✅Buy with Confidence – Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If replacement part ever fails on your Dryer simply con....
Check Stock

120 PCS Wirefy T Tap Electrical Connectors – Quick Wire Splice Taps and Insulated Male Quick Disconnect Terminals

  • TAP INTO ANY WIRE WITH EASE – Wirefy Self Stripping Electrical T Tap Connectors will tap into any wire without needing to cut, strip or solder. Mid span wiretapping has never been easier before.
  • VERSATILE KIT – 60 PCS T-Tap Wire Connectors + 60 PCS Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects – you name it. Wirefy T TAP connector kit will allow you to quickly tap into any wire in any application.
  • THICK TINNED COPPER CONTACTS – Thicker tinned copper contacts will not bend even when tapping into thicker wires.
  • QUALITY TTAP CONNECTOR HOUSING – Quick splice T Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire.
  • PERFECTLY FITTING MALE QUICK DISCONNECTS – Nylon male disconnects have been designed to lock tightly on the T Tap connectors to prevent sliding out.
Check Stock

iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs

  • ★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
  • ★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
  • ★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • ★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
  • ★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....
Check Stock

IWISS 1550PCS 2.54mm Pitch Wire-to-Wire Dupont Connector Kit, includes Pin Headers, Jumper Wire, Crimp Pins for RC Servo, Arduino, SMT, SATA, EPS, PCIE, Battery Balancer

  • 1550PCS Dupont Connector Kit includes a variety of connectors: single row pin headers, bent pin headers, crimp pin connector housings, male and female crimp pins for wires..
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal plastics, ensuring that the connectors are well-protected, reducing the chances of early degradation and increased cycles/minute of the connector subjected to harsh environments..
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male terminal, all manufactured with precision-fitting and durability ensuring accurate mating..
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low smoke, toxicity and flammability requirements of almost all industries..
  • It offers a crimp style lock and a configuration which prevents users from inverted insertion. It is well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals, causing corrosion..
Check Stock

ScaAuto Golf Cart Accessories Plug Anderson SB50 Gray Connector with Handle for EZ-GO EZGO 36 Volt Charger Plug Kit Pre 1995

  • Complete Connector only set - without cable.
  • Golf Cart Charger Plug Perfect for Club Cars, for Taylor Dunn and for Yamaha Golf Carts..
  • All Connectors made with flame retardant materials.
  • This is a new in box SB-50 Kit. Works on 24v, 36v, and 48v systems. Most prevalent on 24 volt industrial equipment and battery chargers or 36 volt Ezgo golf cart chargers. Also found on older for Club Cars, forTaylor Dunn and for Yamaha Golf Carts.SB50 connector kit is complete with plug connector housing and contact pins.
Check Stock

X AUTOHAUX Engine Coolant Thermostat Housing Assembly for Honda CR-V 1997-2001 for Honda Civic 1991-2003 for Honda Accord 1990-2002 for Odyssey Prelude 19301PAA306 19301PLC315

  • OE Number: 19301-PAA-306, 19301PAA306, 19301-PLC-315, 19301PLC315.
  • Fitment: for Honda Civic 1991-2003, for Honda Civic del Sol 1993-1997, for Honda Accord 1990-2002, for Honda CR-V 1997-2001, for Honda Odyssey 1995-1998, for Honda CRX 1991, for Honda Prelude 1992-1996, for Acura Integra 1990-2001, for Acura Legend 1986-1990, for Acura CL 1997-1999.
  • Brand new and never used, directly replaces the old one and easy installation..
  • Good Replacement: The engine's thermostat regulates the temperature of the engine by controlling coolant flow. A bad or failing thermostat: high temperature reading and engine overheating, low temperature reading and underheated engine, temperature changing erratically, coolant leaks around thermostat housing or under the vehicle. How to fine thermostat: You can find your car's thermostat by starting at the upper radiator hose and following it to where it enters the top of the engine..
  • Package Included: 1 x Thermostat Housing Assembly.
Check Stock

Drive-up Golf Cart Crow Foot 2 Prong Charger Plug Fits 36 Volt Club Car Yamaha Models

  • Fits Club Car YAMAHA 2-Blade crows foot style connector 'ONLY' Replacement Kit.
  • Complete Connector only set - Fits chargers with one cable 11.43mm diameter.
  • All Connectors made with flame retardant materials.
  • Package Contains: Connector housing, pins, screws.
Check Stock