Top Thermistor Or Direct To Reviews

uxcell NTC Thermistor Resistors 10D-9 2A 10 Ohm Inrush Current Limiter Temperature Sensors Pack of 20

  • [Small Probe]: NTC thermistor can measure the gap temperature that other thermometers cannot..
  • [High Sensitivity]: The thermistor is high sensitivity and wide operating temperature range(-50℃~125℃), which is easy to use..
  • [Widely Used]: Thermistors can be used as electronic circuit components for instrument circuit temperature compensation and temperature difference cold junction temperature compensation..
  • [Good Stability]: Thermistor has good stability and strong overload capacity..
  • B3950 100K 1% 60mm Thermistor. The model can be judged according to the length of the thermistor cable..
Check Stock

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

  • Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
  • The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
  • Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
  • Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
  • The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....
Check Stock

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

  • Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
  • High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
  • Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
  • Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
  • Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..
Check Stock

8577274 Thermistor for Whirlpool Dryers by PartsBroz - Replaces WP8577274, AP6013514, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, WP8577274VP

  • ✅ PART NUMBER 8577274: The thermistor is a high-quality exact replacement for part numbers WP8577274, AP6013514, 8577274, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, and WP8577274VP..
  • ✅ FOR WHIRLPOOL DRYERS: Use the part to fix select Whirlpool, KitchenAid, Kenmore/Sears, and Maytag dryers. Check your dryer manual or reach out to us to confirm compatibility with your model..
  • ✅ FIXES COMMON PROBLEMS: Dryer on the fritz? Replacing the thermistor, which regulates temperature in your dryer, can fix dryers that don’t produce enough heat, don’t start, or shut off too soon..
  • ✅ SIMPLE DIY FIX: Remove a faulty thermistor and install this new one in under 20 minutes. Helpful tools include a 1/4-inch nut driver, a small flathead screwdriver, and a 1/4-inch socket and ratchet..
  • ✅ HIGH-QUALITY PART: Designed to last, this thermistor meets or exceeds all original manufacturer specifications for performance and fit..
Check Stock

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

  • M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
  • DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
  • Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
  • For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.
Check Stock

AQUAH PARAMOUNT DIRECT VENT NATURAL GAS TANKLESS WATER HEATER 16L / 4.3 GPM

  • Brand New AQUAH Premium direct vent liquid propane gas tankless water heater.
  • 3.7 GPM with 45 temperature rise, thermal output: 28,000 Watt /95,600 Btu/h.
  • Compact, highly efficient and ideal for indoor use with thermal efficiency of >=88%..
  • Constant water temperature regulated by thermistor regardless of fluctuations of water/gas flow..
  • Runs automatically with no need for user intervention..
Check Stock

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

  • Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/47 inches..
  • Recommended parameters for the thermistor: R25℃=100K.
Check Stock

Thetford (618548 Thermistor Assembly

  • 003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 5ohm 003cb003e Thermistor Tolerance:003c/b003e -15% to +15% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.
Check Stock

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

  • HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/39.4 inches.
  • Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.
Check Stock

Noritz NRCP111-DV-NG Indoor Tankless Water Heater 199K BTU - Direct Vent

  • Brand New AQUAH Paramount direct vent natural gas tankless water heater.
  • 4.3 GPM with 45 temperature rise, Thermal Output: 32,000 Watt /109,260 Btu/h.
  • Compact, highly efficient and ideal for indoor use with thermal efficiency of >=88%..
  • Constant water temperature regulated by thermistor regardless of fluctuations of water/gas flow..
  • Runs automatically with no need for user intervention..
Check Stock

Ametherm SL32 1R030 (Pack of 2) NTC Thermistor, SG379 HVAC, Inrush Current Limiter 1 Ohm Ohm ±20% 1.18\ (30mm)

  • 003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 1ohm 003cb003e Thermistor Tolerance:003c/b003e -20% to +20% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.
Check Stock

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

  • 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
  • 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
  • 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
  • 4.Direct drive extruder, great support for flexible filament..
  • 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..
Check Stock

STANDARD IGN PARTS Engine Control Module Wiring Relay RY-412

  • Communicates the engine coolant temperature to the ECM to ensure proper air/fuel ratio, cooling fan and temperature gauge operation.
  • Thermistor placement within the housing matches original design to ensure proper output.
  • Proper thermal conductive grease to provide accurate temperature transfer to the thermistor.
  • Causes for replacement: check engine light, no/erratic gauge operation, no/erratic cooling fan operation, engine overheating.
  • Causes for replacement: rough idle, engine hesitation, poor fuel economy, failed emissions test.
Check Stock