Top Thermistor Kit Reviews

uxcell NTC Thermistor Resistors 10D-9 2A 10 Ohm Inrush Current Limiter Temperature Sensors Pack of 20

[Small Probe]: NTC thermistor can measure the gap temperature that other thermometers cannot..
[High Sensitivity]: The thermistor is high sensitivity and wide operating temperature range(-50℃~125℃), which is easy to use..
[Widely Used]: Thermistors can be used as electronic circuit components for instrument circuit temperature compensation and temperature difference cold junction temperature compensation..
[Good Stability]: Thermistor has good stability and strong overload capacity..
B3950 100K 1% 60mm Thermistor. The model can be judged according to the length of the thermistor cable..

Check Stock

LG EBG60663207 Genuine OEM PTC Thermistor Assembly for LG Refrigerators

This LG PTC Thermistor Assembly is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
Replacement LG brand Refrigerator PTC Thermistor Assembly or Positive Temperature Coefficient Thermistor starts the compressor motor.
LG EBG60663207 Refrigerator PTC Thermistor Assembly Is also called the Compressor Overload and Start Relay.
High quality LG OEM EBG60663207 Refrigerator PTC Thermistor Assembly is manufactured with premium materials for durability and exact fit, be sure to....
Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.

Check Stock

Ender 3 Hotend 3D Printer Extruder Assembled MK8 Hot End Kit for Ender 3/Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

100% Creality 3D original and high quality 3D printer accessories.
Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro 3d printer.
Tip of the nozzle, Aluminum Heating block, Throat Pipe (Built-in Teflon).
MK8 extruder hot end kit with thermistor and heater,24V 40W.

Check Stock

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..

Check Stock

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.

Check Stock

Samsung Dryer Heating Element DC47-00019A, DC96-00887A & DC47-00016A Thermal Fuse, DC47-00018A Thermostat and DC32-0000A Dryer Thermistor COMPLETE Dryer Repair Kit Replacement by Blue Stars

MODEL NUMBER: DC47-00019A & DC47-00018A & DC96-00887A & DC47-00016A & DC32-00007A Dryer Kit.
FULL KIT SET: Includes a DC47-00019A Dryer Heating Element, a DC47-00018A Dryer Thermostat, a DC96-00887A Dryer Thermistor, a DC96-00016A Dryer Thermostat and a DC32-00007A Dryer Thermistor.
EASY TO INSTALL: It is made exactly fit for most top name brands (Samsung, Kenmore.
PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer.
MONEY-BACK GUARANTEE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.

Check Stock

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....

Check Stock

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

Anet 3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
There is a 2 pin female connector on the thermistor for 3D printer.
Wire length for the thermistor: 1m/47 inches..
Recommended parameters for the thermistor: R25℃=100K.

Check Stock

Genuine E3D Hotend Thermistor Cartridge Replacement

Direct replacement of cartridge type thermistor in E3D hotends..
A custom made thermistor encapsulated into an easy to use cartridge package..
Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm).

Check Stock

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
There is a 2 pin female connector on the thermistor for 3D printer.
Wire length for the thermistor: 1m/39.4 inches.
Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.

Check Stock

Socobeta DIY Digital Electronic Clock Kit with Temperature Prompt

【WITH TEMPERATURE PROMPT】The DIY clock kit is equipped with temperature prompts, which is convenient for life, and the machine has a thermistor, which can let you know the changes in room temperature in time..
【HIGH DROP RESISTANCE】The case of the LED clock kit is made of light-transmitting, exquisite acrylic material, with high transparency, high drop resistance and durability..
【LED DISPLAY WITH LARGE FONT】DIY electronic clock kit The LED dot clock with large fonts conforms to the standard time, so you will always be on time. You deserve this DIY clock kit..
【EASY INSTALLATION】The digital DIY electronic clock kit is simple to install and does not require particularly complicated operations. Therefore, you can use the clock kit with confidence..
【NOT EASY TO DAMAGE】This clock kit adopts ergonomic design and stylish appearance. At the same time, it has a long service life, is not easily damaged, and can be used for a long time..

Check Stock

Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer Not for Ender 5

100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work....
Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy..
Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the....
With more terminal housing and pins as spare parts, in case fail installation and waste ..
MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..

Check Stock

Thetford (618548 Thermistor Assembly

003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 5ohm 003cb003e Thermistor Tolerance:003c/b003e -15% to +15% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.

Check Stock