Top Thermal break Aluminum Profile Process Reviews

ArctiClean 60ml Kit 1 & 2 Thermal Grease Paste Compound Remover and Purifier (Limited Edition)

  • Unique 2-Step Process: ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 T.
  • ArctiClean 1 Thermal Material Remover: ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads..
  • ArctiClean 2 Thermal Surface Purifier: The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material..
  • Using ArctiClean 2 With Other Solvents: ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink..
Check Stock

SOLA LSX59 X PRO Aluminum Box Profile Spirit Level with 3 60% Magnified Vials, 59-Inch

  • Break-resistant acrylic block FOCUS vials with 60% magnification and luminous backing.
  • Ergonomic, rigid aluminum profile for maximum stability (890 g/m strength).
  • Shock absorbing end caps with anti-slip surface.
  • Ergonomic, rigid aluminum profile for precise measurement results.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

Fast Defrosting Tray For Thawing Frozen Foods - Eco-friendly Rapid Defroster Meat Tray Thaw Master With Silicone Borders - Defrost Meat Thaw Metal Plate (29.5x20.8CM)

  • FAST DEFROSTING TRAY : Defroster tray is made of premium thermal conductive aluminum to speed up thawing process, the thawing speed is 8 times faster than at room temperature..
  • NATURAL HEAT / NO MICROWAVE : Defroster tray is made of premium thermal conductive aluminum,No need for artificial heat as the aluminum tray will naturally GENERATE HEAT and speed up your thawing process!.
  • MAINTAIN ORIGINAL TASTE ：Defrosting mat can be used to defrost Chicken Breasts, Beef Steak, Pork Chops, Lamb chops, Fish and so on.maintain the original taste, nutrition, and deliciousness. Save the original quality without sacrificing and damaging the original ingredients..
  • EASY TO CLEAN : Simply put the tray in the dishwasher, as they are DISHWASHER SAFE! Easily removable silicone if desired for a better clean!.
  • EASY TO STORE: size: 23 * 16.5 * 0.2cm, family size does not occupy space.
Check Stock

JBL Spearguns Carbine Series Super Carbine Speargun for Spearfishing, Mini Speargun for Freediving, Scuba Diving, Fishing, Diving, Aluminum Barrel, Stainless Steel Shaft

  • CARBINE SERIES SPEARGUN: Hardened spring stainless steel shaft, point, trigger & sear. Handles made of aircraft quality aluminum, anodized, and finished with an epoxy system for integrated double protection..
  • Welcome to the Carbine Speargun series.  Everything you need to start spearfishing, without breaking the bank..
  • AIRCRAFT GRADE ALUMINUM BARREL: Just like its bigger brothers, Carbine fishing spears are constructed of aerospace-grade aluminum and feature high-strength stainless steel shafts and triggers..
  • ONE HAND SAFETY: This small spearfishing speargun features a one-hand safety & trigger operation and a shock absorber shock line..
  • LOW PROFILE GRIP: They’re powered by 1⁄2” Nitro Bands and feature a low-profile pistol grip handle that makes for easy target acquisition. If you want a speargun that will bring home plenty of fish without....
Check Stock

Dive Rite Wreck Sidewinder Primary Reel 250ft #36 White Line RE50

  • DESIGN - Primary reel combines a low profile design with an easy to use configuration.
  • ALUMINUM FRAME - The frame is constructed of aircraft grade hardcoated aluminum, providing extra protection against corrosion.
  • LINE - Dive Rite reels use DuPont fiber braided line that provides strength and minimizes fraying. Includes marine grade stainless steel double end bolt snap.
  • CAVE SIDEWINDER PRIMARY REEL - RE50400 - 400 ft (121.9 m) #24 braided line, 220 lbs breaking strength.
  • WRECK SIDEWINDER PRIMARY REEL - RE50250 - 250 ft (76.2 m) #36 braided line, 350 lbs breaking strength.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Mac Auto Parts 100% New Pitman Arm Idler Arm for Toyota Pick Up 4 Runner 4 Wheel Drive 86-98

  • VEHICLE SPECIFIC: Klimoto parts are designed and manufactured to meet or exceed OE specifications for form, fit, and function and configured....
  • THICKER CORE REDUCES OVERHEATING - Thicker 32mm core - instead of the traditional 26mm core - for increased cooling capacity and greatly reduced....
  • ALUMINUM CORE REFERENCE: We use all new aluminum to ensure purity of material and strength in manufacturing process..
  • THERMAL EXPANSION CUTS - Thermal expansion cuts reduce radiator fatigue failure by allowing greater core expansion and contraction in response to....
  • Lifetime Warranty: All our products come with Lifetime warranty for manufactuerer defects. Please contact us for details.
Check Stock

FlexxPoint High Clearance Gutter Cover System, White 5 Inch Gutter Guards, 102 Ft.

  • Available in White, Matte Aluminum, Thermal Thaw Black and Brown. Now made from Fully Hardened High Strength .019 Heavy Gauge Aluminum!.
  • High Clearance Design Clears High Profile Gutter Brackets, Easy to Install, Contractor pricing, Includes 1/2" #8 Stainless Steel Zip Screws..
  • Cannot be seen from the ground, Blocks all types of debris. Clog free, High volume water flow..
  • Does NOT void roof warranties, Permanently installs, Easy to handle 4 foot sections.
  • Now with STAINLESS STEEL fastners, Factory Direct, Made in the USA.
Check Stock

senya Lunch Bag Koala And Flowers Insulated Lunch Box Cooler Bag Tote Bag for Women Kids/Picnic/School/Work

  • Larger Capacity: The lunch bag Dimension is 9.8 x 6.7 x 8.7 inches. The main compartment is spacious for your lunch, the front insert pocket is ideal....
  • Material: The Lunch Bag is made with 300 D oxford cloth and aluminum foil. High quality metal zippers will not easy break, thick handle reduce weight....
  • Thermal Resistance: Superior aluminum film for great thermal resistance, our lunch bag keeps food warm or cold up to 5 hours..
  • Lightweight &Portable: A strong thick handle, highly stitched not tear easily, ensure your comfortable carry..
  • Unique Print: Vibrant colors and cute pattern provide style to your lunch bag, suitable for all age groups..
Check Stock

ArctiClean Kit 1 & 2 Thermal Paste Compound Remover + Arctic Silver 5 Thermal Compound Paste 3.5g + Lansh Tool

  • Developed by Arctic Silver, one of the world experts in thermal compounds and heat transfer , Easy-to-apply bottles make the cleaning process easier than competing products.
  • Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles..
  • Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches..
  • 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Check Stock

FlexxPoint High Clearance 30 Year Gutter Cover System, White Residential 5 Inch Gutter Guards, 510 Ft.

  • Available in White, Matte Aluminum, Thermal Thaw Black and Brown. Now made from Fully Hardened High Strength .019 Heavy Gauge Aluminum!.
  • High Clearance Design Clears High Profile Gutter Brackets, Easy to Install, Contractor pricing, Includes 1/2" #8 Stainless Steel Zip Screws..
  • Cannot be seen from the ground, Blocks all types of debris. Clog free, High volume water flow..
  • Does NOT void roof warranties, Permanently installs, Easy to handle 4 foot sections.
  • Now with STAINLESS STEEL fastners, Factory Direct, Made in the USA.
Check Stock