Top Tft Touch Screen Display Reviews

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....

Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..

Check Stock

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

...3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
⭐【Satisfying After-Sales Support】If you have any problems about BTT SKR MINI E3 V3.0 & TFT35 E3 V3.0.1 smart display combo sets, please feel free to contact us anytime. We have profession technical supports team to help you as soon as we can..

Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
You need a USB to TTL adapter to plug nextion display into USB port..
Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....

Check Stock

Nextion Display 3.2 inch NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 + Transparent Acrylic Case Enclosure for Arduino Raspberry Pi

NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors..
You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
You need a USB to TTL adapter to plug nextion display into USB port..
Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....

Check Stock

5 inch Touchscreen Monitor for Raspberry Pi DSI LCD Screen 800×480 Display for Raspberry Pi 4B 3B+ 3A+ 3B 2B B+ A+ CM3/3+ Compatible with Raspbian Ubuntu Kali WIN10 IoT RetroPie

5 inch capacitive touch display for Raspberry Pi, 800×480 resolution,TFT wide angle, toughened glass touch panel.
5 inch TFT screen capacitive touch control, support up to 5-points touch.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, another adapter board is required for CM3/3+, supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.
Mipi DSI interface, refresh rate up to 60Hz.

Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

PalmOne Tungsten T3 Handheld

Operating System - Microsoft Windows Mobile 6 ( Pocket PC ).
Display - 3.5" Brilliant TFT LCD 65k full-colors, 16-bit display QVGA, 240x320 resolution with touch screen (anti-glare).
Memory - 256MB Flash ROM and 64 MBBluetooth v2.0(EDR) / SIR 115.2kbps (max) / USB 1.1/ WiFi 802.11b+g.
Expansion Slot - 1 x SD slot (SDIO/SD/MMC ) up to 4GBIntegrated microphone and speakerFull duplex record and playback1 x 3.5mm earphone jack and MP3 stereo.

Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

High speed SPI display with digital I2C touchscreen driver.
Single-touch capacitive touch bonded on top.
240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.

Check Stock

Ciyoo N1 IP67Waterproof Fitness Smartwatch for Women ,Fitness Tracker Watch with Heart Rate Monitor Step Sleep Tracker Jewelry Watch White

Fashion Design -Fashion women appearance design, low-key and simple watch strap and flip the wrist screen switch, show a unique charm design.Finally,....
The intelligent LED display design allows you to quickly and easily adjust the pattern with your fingertips. The bracelet will vibrate to remind you....
Large screen full touch, TFT true color screen.
High Sensitivity Touch Screen - The 0.66 inch white light level screen allows information to be clear on the screen.With the round screen operation,....
Convenient Health Count —This journey smart watches, by scanning or code, “Droihealth " in the app store market search in real-time records your....

Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..

Check Stock