Top Tft Lcd Controller Board Reviews

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

VSDISPLAY HD-MI DVI VGA Audio LCD Controller Board Fit for 17 inch 4:3 1280x960 DV170YGZ-N10 DV170YGM-N10

  • Come In Standby Model When Not Input Signal. Standby Model 003c1W..
  • Recommend Power Adapter Spec. Input Power Adapter: 12V DC, 2A or More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board.) Compatible Speaker for The Controller Board : VSDISPLAY Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board M.NT68676.3 (new version) and Other Monitor Driver Board which Have PH2.0 Speaker Connector..
  • Packing list: 1× HD-MI VGA DVI LCD Controller Board 1× Screw And Nut For GND Connection 1× Keyboard With Cable. There is No Power Adapter in The Packing List. If need , you can get one from VSDISPLAY store. Any question,please feel free to contact us. (First click sold by 'Shenzhen Weisi Electronics Co., Ltd', then 'ask a question').
Check Stock

VSDISPLAY 14.9\ 1280x390 LCD Screen LTA149B780F with HD-MI DVI VGA Audio Controller Board M.NT68676, for DIY 1up Cabinet/Car Gauge Cluster/Digital Marquee Monitor

  • 14.9" LTA149B780F 1280x390 LCD Screen ,HD-MI DVI VGA AUDIO LCD Controller Board work for screen..
  • 14.9 inch special long strip industrial display , LVDS interface LCD screen, Brightness 400 cd/m² (Typ.) Contrast Ratio 500:1 (Typ.) (TM) .Fit for Game display, car monitor..
  • Audio Input: HD-MI,Audio Output: Speaker Connector. Can work with :VSDISPLAY Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board M.NT68676 HD-MI DVI VGA Audio input.
  • Input Power Adapter: 12Vdc More than 2A. Power Size:Connector 5.5mmx2.1mm , help to notice there is no power adaptor in the packing list. Recommend adapter :VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output,Power Supply, US Plug,Fit for Many Types of VSDISPLAY LCD Controller Board.
  • Packing list : 1× HD-MI VGA DVI LCD Controller Board M.NT68676 1× 14.9inch LTA149B780F 1280x390 LCD Screen 1× LVDS Cable 1× Converter Board 1× Keyboard With Cable 1x instruction ( Help to notice , help to notice there is no power adaptor and speaker in the packing list.) Please free free to conact us if you have any question (First click sold by 'Shenzhen Weisi Electronics Co., Ltd', then 'ask a question').
Check Stock

Geekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)

  • For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
  • Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
  • Physical resolution 320 x 480, with resistive touch control.
  • it supports up to 125MHz SPI signal input, showing stable and no flicker.
  • Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
  • LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

T POWER Charger Compatible for Samsung SyncMaster 15' 17' 18' 19' 21' 22'' 24' 27' S24C770T, T22C350ND, T24C550ND,S24C300HL S24C370HL LCD LED HD TV Monitor Ac Dc Adapter Power Supply

  • ...B, BN44-00080D, BN44-00131A, BN98-04722A , AD-3014, PN3014, AD-3014STN, PA-1031-21, PA-1031-21-FH, AD-3014B, SB350, AD-3014N, A3014VE, 14030GPCN, ADS-30NJ-12, PS30W-14J1, AD-3014B, BN44-00394K, BN44-00394M, BN44-00394A, BN44-00394B, BN44-00394C.
  • Compatibility: LTN1565 LCD 15" monitors. 150MP, 1501MP 152B, 152T, 570S TFT, 570V TFT 15" LCD monitors. 170T, SyncMaster 172B, 172S, 172T, 171P 17" LCD monitors. 180T 18" LCD monitors. 191T, 192T, 19" LCD monitors ..
  • SyncMaster 760V TFT, SyncMaster 770 TFT, 17" LCD monitors Samsung SyncMaster 152B 152S 152T 153B 15in 1701mp 170T LCD 171P LCD 172S LCD 172T LCD 180T 192T 330TFT 331TFT 530TFT 531TFT 770 TFT 770TFT SYNCM173S SYNCM180T SYNCM570STFT SYNCM700TFT SYNCM800TFT SYNCM760VTFT SYNCM770TFT SM171P GH17P SMT-170QN SYNCM 1501MP 150MP 151P 152MP SYNCM 172W 173S 1900FP 700 TFT 760V 800 TFT SYNCM1501MP SYNCM150MP SYNCM151P SYNCM152B SYNCM152MP SYNCM152S SYNCM152T SYNCM531TFT SYNCM170T SYNCM171P.
  • Samsung SyncMaster 193p AP04914-UV GH19PS GH19PSAS LTM1775W LTM1755B LTN1765 LTN1785W LT-P1795W LW15E23CB LW17N13W 17in LCD TV, 173B 172B 172X 173p 191T 192mp 960BF 19in Samsung Syncmaster 21" 23" 23.6" 24" Charger , Samsung Syncmaster Model LCD Monitor S23B300B S20B300N S22B300B S19B300N B550V S23B550V,S27B550V, LED Monitor....
Check Stock

T POWER 14V ~ 16V Ac Dc Adapter Compatible for Samsung SyncMaster 15' 17' 18' 19' 21' 22'' 24' 27' LCD LED HD TV Monitor P,N: AD-4214N AD-4914N AP06314-UV BN44-00486A Power Supply Cord Charger

  • ...14, PN3014, AD-3014STN, PA-1031-21, PA-1031-21-FH, AD-3014B, SB350, AD-3014N, A3014VE, 14030GPCN, ADS-30NJ-12, PS30W-14J1, AD-3014B, BN44-00394K, BN44-00394M, BN44-00394A, BN44-00394B, BN44-00394C.
  • Compatibility: Samsung 23" 27inch LED Monitor XL2370 XL 2370 , LTN1565 LCD 15" monitors. 150MP, 1501MP 152B, 152T, 570S TFT, 570V TFT 15" LCD monitors. 170T, SyncMaster 172B, 172S, 172T, 171P 17" LCD monitors. 180T 18" LCD monitors. 191T, 192T, 19" LCD monitors ..
  • SyncMaster 760V TFT, SyncMaster 770 TFT, 17" LCD monitors Samsung SyncMaster 152B 152S 152T 153B 15in 1701mp 170T LCD 171P LCD 172S LCD 172T LCD 180T 192T 330TFT 331TFT 530TFT 531TFT 770 TFT 770TFT SYNCM173S SYNCM180T SYNCM570STFT SYNCM700TFT SYNCM800TFT SYNCM760VTFT SYNCM770TFT SM171P GH17P SMT-170QN SYNCM 1501MP 150MP 151P 152MP SYNCM 172W 173S 1900FP 700 TFT 760V 800 TFT SYNCM1501MP SYNCM150MP SYNCM151P SYNCM152B SYNCM152MP SYNCM152S SYNCM152T SYNCM531TFT SYNCM170T SYNCM171P.
  • Samsung SyncMaster 193p AP04914-UV GH19PS GH19PSAS LTM1775W LTM1755B LTN1765 LTN1785W LT-P1795W LW15E23CB LW17N13W 17in LCD TV, 173B 172B 172X 173p 191T 192mp 960BF 19in Samsung Syncmaster 21" 23" 23.6" 24" Charger , Samsung Syncmaster Model LCD Monitor S23B300B S20B300N S22B300B S19B300N B550V S23B550V,S27B550V, LED Monitor....
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display Speedometer Control Panel - Odometer for Electric Bicycle ebike

  • The waterproof TFT 750C LCD display offers much more than a digital screen and fancy look, it allows users to edit controller parameters, control all functions on your ebike from speed to wheel size..
  • This intelligent designed ebikes accessory with Simple operation for any men or women to track their outdoor riding needs such as cycling distance, remaining battery level, current speed (mph-kmh), average speed, maximum speed, total and single trip distances..
  • Numbers are big enough to ensure readability while riding in all conditions. With the colorful backlight LCD, provide your high visible statistics during day and night..
  • EBIKELING 24V/36V/48V/52V Waterproof TFT 750C - LCD Display keeps moving in worst weather thanks to its full-sealed design. Waterproof body allows the bike computer to stay with you in any environment or weather. The body is fully sealed, to make sure no water can get in by any means..
  • High-contrast 3.2inch IPS colorful matrix screen. Ergonomic external button design, easy to operate. The large buttons allows you to select the desired mode. This makes the EBIKELING LCD Display a very simple and attractive..
Check Stock

KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V

  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive..
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

NC for LP140WF1 (SP)(B1)/(SP)(J1)/(SP)(K1)/(SP)(K3)/(SP)(U1) EDP 30PIN 1920x1080 Monitor LED HDMI-Compatible+VGA Controller Board (LP140WF1 (SP)(U1))

  • Controller Board Description: The controller driver board work for EDP Interface LCD Screen Come In Standby Mode When Not Input Signal Standby Mode.
  • The kit includes: 1Pcs x EDP controller driver board 1Pcs x EDP signal cable 1Pcs x Keyboard with cable.
  • Work compatible with the following LCD screen model: LP140WF1 (SP)(B1) LP140WF1 (SP)(J1) LP140WF1 (SP)(K1) LP140WF1 (SP)(K3) LP140WF1 (SP)(U1).
  • Great visuals: This LCD driver board provides excellent detail with a stunning resolution, making it perfect for productivity and multimedia applications..
  • Energy-friendly: This product design that emphasize recyclability, waste reduction, energy efficiency and safety..
Check Stock

VSDISPLAY 7\ 7 Inch 1280x800 IPS LCD Screen N070ICG-LD1 with HD-MI VGA 2AV LCD Controller Board

  • 7" N070ICG-LD1 1280x800 LCD Screen: Resolution 1280RGB)×800 Outline Size 161 ×107×4.5 (H×V×D) Display Area 149.76 × 93.6 (H×V) Brightness 400 cd/m² (Typ.) Contrast Ratio 800:1 (Typ.) (TM).
  • Display Mode HS-IPS, Normally Black, Transmissive. Signal Interface LVDS (1 ch, 8-bit) , Connector , 39 pins..
  • HD-MI VGA 2AV LCD Board Work for LVDS Interface LCD Screen, 50Pin TTL Connector for 7inch~10.1inch LCD Screen.
  • Recommend Power Adapter Spec: Input Power Adapter:12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board) Come In Standby Model When Not Input Signal. Standby Model 003c1W.
  • Packing list : 1× HD-MI VGA+2AV LCD Controller Board VS-TY2662-V1 1× 7inch N070ICG-LD1 1280x800 LCD Screen 1× LVDS Cable 1× Keyboard With Cable(Help to notice , there is no power adpter in the packing list.).
Check Stock