Fluke 3102-4 Fluke Calibration 3102-4 Insert for Low-Temperature calibrator, 1/4\ Diameter
- Description: insert for low-temperature calibrator, 1/4 inch.
Top Temperature Calibrator Reviews
Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)
- Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
- | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
- Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
- Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
- Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..
Wagner Meters Orion® 910 Pinless Wood Moisture Meter
- Orion 910 deep depth pinless moisture meters featuring accuracy, versatility, and quality.
- Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
- Virtually unaffected by temperature of the wood or the environment.
- Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
- Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
Wagner Meters Orion® 930 Pinless Wood Moisture Meter
- Orion 930 dual depth pinless moisture meters featuring accuracy, versatility, and quality.
- Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
- Virtually unaffected by temperature of the wood or the environment.
- Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
- Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
Fluke Calibration 3320 Spare Stir Bar for 6102/7102/7103 Micro-Bath Thermometer Calibrators, 7/16\ Diameter x 2.00 Magnetic Stir
- Magnetic stir bar for Fluke Calibration 6102, 7102, or 7103 micro-bath thermometer calibrator.
- Provides improved temperature accuracy, uniformity, and stability.
Fluke 725 Multifunction Process Calibrator
- The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
- Small, streamlined shape, rugged, reliable design stands up to field use.
- Easy to read measure/source screen lets you view input and output simultaneously.
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters.
- Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters.
Wagner Meters Orion® 950 Pinless Wood Moisture Meter with Backlight
- Orion 950 smart pinless moisture meters featuring accuracy, versatility, and quality. Now with backlight..
- Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
- Virtually unaffected by temperature of the wood or the environment.
- Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
- Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
ennoLogic Volt mA Loop Process Calibrator eC380V - 0-20V and 4-20mA Signal Generator Simulator – Portable Precision Volt Millivolt and mA Generator and Meter for Transmitters Current Loops PLC
- VERSATILE AND ACCURATE VOLT MA CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, PLC....
- BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire....
- MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution) and 0-20V (1mV resolution) with....
- GENERATE PRECISE TEST VOLTAGES AND CURRENTS for testing loops, transmitters, data logger, meters or any devices that measure 4-20mA currents or sensor....
- The eC380V Volt/mA calibrator is powered by six AAA batteries (included). The package includes one eC380V calibrator, 6 AAA batteries, carrying case,....
Ametek Jofra 100189 Aluminum Single Hole Predrilled Insertion Tube for MTC-320 A and CTC-320 A Dry Block Temperature Calibrator, 4\ Depth, 1/2\ Diameter
- Single-hole low-temperature insertion tube for Ametek MTC-320A and CTC-320A dry block calibrator (sold separately).
- Pre-drilled probe hole has an 4" depth and a 1/2" diameter.
CEM BX-150 Dry-Well Temperature Calibrator 33°C to 300°C
- The calibrator can operate at very high temperature . Precautions must be taken to prevent personal injury or damage to surrounding objects . probes may be hot when removed from the units and should be placed on a heat resistant surface . The unit may remain hot for several minutes after switching off .Do not switch off if temperatures above +100℃. Allow to cool before storage ..
- Caution must be taken when removing probes and inserts from the units . if the unit is set at a high temperature the inserts will be very hot and could cause burns probes and inserts only on a suitable heatproof surface ..
- Only place temperature probes in dry-block holes . These units are designed to be operated dry . Do not sprinkle and liquid into any of the dry-block holes ..
- These dry-blocks are designed to be rugged and durable but do contain electronics. Do not operate in dirty , dusty or very damp enviroment or near liquids that could present a hazard from electric shock..
- The units are ideal for use in a variety of industrial and process applications .Each unit is supplied with a traceable certification of calibration of calibration showing actual test data , which can be used as part of quality assurance programmes ..
Wagner Meters Orion® 950 Smart Pinless Wood Moisture Meter with Backlight & Temperature RH Kit - Traceable Calibrator - NIST
- Orion 950 smart pinless moisture meters featuring accuracy, versatility, and quality. Now with backlight..
- Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
- Virtually unaffected by temperature of the wood or the environment.
- Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
- Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
TSI Quest (Formerly 3M) eg4-D-AC3 Personal Noise Dosimeter, Dock, and Calibrator
- Kit Includes: EDGE 4 Dosimeter with 1/4-Inch Microphone Two Windscreens, AC-300 Calibrator, Single Docking Station, Calibrator Adapter, USB Cable, Power Supply and Storage Case.
- Displays SPL, dose, Lavg, Leq, TWA, maximum level, minimum level, peak level, exposure, and run time… all while in Run mode.
- Independent selectable thresholds from 70 to 90dB or none, independent exchange rates for each dosimeter (3, 4, or 5 dB), and independent criterion levels from 70 to 90 dB in 1dB increments.
- Rechargeable lithium polymer battery provides more than 60 hours of run time, and only needs to be replaced every three years.
Ace Instruments Static Pump, DP Pressure Gauge Calibrator for HVAC, Laboratories, Calibration Labs Model: ACE PSI-PP1 (Static Pressure Pump with Master Gauge)
- Calibrator: Static Pressure Pump (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
- Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
- Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
- Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
- Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Laboratories, Calibration Labs..