Top Temperature Calibration Circulation Reviews

AMTAST Digital Coffee Densitometer Coffee Concentration Refractometer Sugar Drinks Density Coffee Brix TDS Meter AMR300

  • Function: Coffee concentration with range of 0-25%.
  • Provide with suction tube and spare protective cover. The function keys are clear and easy to operate. Digital screen with large number, battery power can be displayed..
  • Temperature unit converting: Press key “SCALE” more than 2 seconds, meter will display Celsius or Fahrenheit..
  • Calibration: No need calibration every time. Drip 3~5 drops distilled water in sample plate, make sure the water and meter temperature is same and standard temperature is 20ºC, then cover it. Press key “CAL” more than 2 seconds until “CAL” flashing, press “CAL” key again, meter will display “END” and show 0.0%..
  • Power off: Meter will power off within one minute if no any operation..
Check Stock

YINMIK YK-P01 pH Tester Digital pH Meter for Water Hydroponics, Accurate pH Temp Meter with ATC for Pool, Spa, Hot Tub, Indoor Plants, Drinking Water, Wine Beer Home Brewing, Aquarium

  • [Large Horizontal Screen Display] Tired of using yellow ones with small vertical reading display? YINMIK YK-P01 pH meter screen is designed for horizontal display, pH and temperature value can be read simultaneously which makes your job easier and more comfortable.
  • [Wide Application] Excellently Use YINMIK PH Meters to measure the pH in your pool and spa.
  • to monitor your indoor garden nutrients in water and soil and Check pH when mixing media for tissue culturing.
  • to get a decent idea of your mash ph when brewing beer or wine.
  • to monitor your aquarium water conditions and test pH of your koi ponds water.
  • to measure pH of your well water , alkaline tap water and other drinks ..
  • [Accurate pH Tester with Effective ATC] Built with stainless steel temperature sensor, YK-P01 pH meter has an effective temperature compensation (ATC) function, which ensures the rapid response and accurate test results..
  • [Easy Calibration for YINMIK pH Tester] Supporting 3-point auto calibration, following the instruction manual can easily achieve 4.00, 7.00, 10.01 auto calibration. Don't worry about the calibration solution, you can easily configure up to 500ml of calibration solution for each standard using the calibration powder included in the package. In addition, you can a....
Check Stock

3 in 1 Water Quality Multi-Parameter pH EC Temperature Meter Tester Monitor Sensor Probe Test Kit ATC Waterproof Black-Light for Aquariums Hydroponics Laboratory Pool Spa Drinking Water

  • THREE- in- ONE : pH Measurement , EC Measurement, Temperature Measurement.
  • EASY CALIBRATION: pH and EC with just a mini-screwdriver.
  • Automatic Temperature Compensation (without this, pH reading will differ as the temperature....
  • Convertible temperature readout in degree Centigrade and degree Fahrenheit, quick and easy to get your wanted result.
  • WIDE APPLICATIONS : Beverage, fish hatcheries, food processing, aquarium, photography, laboratory, quality control, school & colleges, swimming pools,....
  • COMES WITH : 1 x pH EC Temperature Meter 3 x Calibration Buffer Powder (pH 4.01, pH6.86 and pH9.18) 1 x Calibration Solution (EC 1413) 1 x English....
Check Stock

Extech PH220-C Waterproof Palm pH Meter with Cabled Electrode

  • 3 Modes in 1: With the VIVOSUN 3-in-1 pH meter, you can accurately measure pH, TDS and temperature values to discover your water quality and ensure your family’s health.
  • Automatic Calibration: Featuring three-point calibration, the VIVOSUN pH pen can automatically identify calibration solutions of pH 4.00, pH 6.86 and pH 9.18.
  • High Accuracy: Highly sensitive probe gives you a full measurement range of 0-14 pH, 0.01 pH resolution.
  • pH tester digital green backlit display ensures you can read the measuring results under any conditions.
  • Automatic Temperature Compensation: With the VIVOSUN pH meter’s accurate ATC, pH / TDS / EC / temp function can accurately read sample values across a broad temperature range of 32 °F-140 °F.
  • Solve the problem of inaccurate measurements caused by changes in liquid temperature.
  • Multiple Uses: Pocket-sized and multi-functional, the VIVOSUN pH tester is ideal for daily use, to add to water testing kits for drinking water, or as a gift for family and friends.
Check Stock

Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock

AT4516 16 Channel Digital Thermometer High Temperature Data Logger Temperature Chart Recorder

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock

Traceable Memory-Loc Dual Zone Temperature Monitoring & Data Logger Kit (TM-6441)

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock

VIVOSUN Digital PH Meter for Water, 0.05ph High Accuracy Pen Type PH Tester for Hydroponics, Household Drinking, Pool and Aquarium

  • AUTOMATIC CALIBRATION – Factory calibrated, but recalibration is needed in case of long period of inactivity or after a frequent use. pH 4.01/pH 6. 86/pH 9.18 calibration powders are included. Push the auto-calibration button, the tester will automatically identify the calibration solutions..
  • AUTOMATIC TEMPERATURE COMPENSATION – Thanks to the built-in automatic temperature compensation(ATC), our PH tester can accurately test pH value of the sample at any temperature in the range of 0℃- 50℃, no need to take care about the temperature of testing liquid..
  • FAST RESULTS & COMPACT SIZE – No more consuming paper strips or other inaccurate pH test chemicals, it only takes a few seconds for your result to appear on screen. The lightweight and portable size allows you to take it around easily in your pocket and do your measuring anywhere..
  • WIDELY USED - Ideal for home or laboratory uses. Can be used to test drinking water, swimming pools, PH balance in aquarium, hydroponics, bath tub, RO system, spa, wine, beer and any other liquids, or anywhere need to test PH value and get accurate data..
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • The TL2-A is a versatile 2-channel precision bench top thermometer offering a convenient USB interface for data logging and sensor configuration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Averag....
Check Stock

Zydiwo 17 Pcs Calibration Weights Set 10mg-100g Calibration Weight Kit Stainless Steel Calibration Weight for Calibrate The Balance Diamond Jewelry Carat Scales Metering Verification

  • 【17 Pieces Calibration Weights】The calibration group contains 17 different weights (including 1x100g, 1x50g, 2x20g, 1x10g, 1x5g, 2x2g, 1x1g, 1x500mg, 2x200mg, 1x100mg, 1x50mg, 2x20mg, 1x10mg) and 1 tweezer..
  • 【High Precision】The calibration kit is suitable for calibration balance, tensile test, measurement verification and diamond scale, and the allowable error is -0.003 to +0.003g..
  • 【High Quality Materials】These weights are made of strong stainless steel. The surface is chrome, corrosion resistant, mirror polishing process, and highlighting..
  • 【Come with a Tweezer】The calibration weight assembly is equipped with tweezers, which is more convenient to take the calibration weight, not easy to rust and long service life..
  • 【Quenching Process】The calibration weight adopts high-temperature quenching process, which has high hardness, wear resistance and durability..
Check Stock

Digital Combo pH & Temperature Meter, Aquarium Thermometer pH Monitor with Automatic Calibration Function for Fish Tank Hydroponics Aquaculture Laboratory

  • FEATURES: Large screen monitor with smart backlight which allows you to read easily even in dark sorroundings. pH and Temperature display with low battery indicator and the unit operates power saving mode..
  • Multi-points Calibration: Up to 3 Points PH calibration (pH 7.0 / pH 4.01 / pH 10.01). It has advance one touch calibration function with automatic buffer recognition to avoid errors..
  • ATC (Automatic Temperature Compensation): The monitor has ATC function so it will decrease the error of PH readings caused by the fluctuation of water temperature..
  • HIGHLY ACCURATE MEASUREMENT: It has separate probe. When taking a measurement, simply place your probes into the solution and and then the accurate readings will be displayed on screen..
  • POWER SOURCE: The monitor is operated with 4 x AA Alkaline Battery. It will go into power saving mode after around 5 minutes. In this way, it can provide battery life time for at least 3 months..
Check Stock

Hanna Instruments HI98128 pHep 5pH/Temperature Tester, 6-25/64\ Length x 1-19/32\ Width x 1\ Height

  • Compact pH and temperature tester used in laboratory and industrial applications.
  • Automatic Temperature Compensation (ATC) for accurate pH readings in fluctuating temperatures and automatic calibration at one or two points to help prevent calibration errors.
  • Dual-level LCD screen simultaneously shows the current measurement and the current temperature.
  • Replaceable electrode cartridge to extend meter life.
  • Waterproof, dustproof housing allows the tester to float.
Check Stock