Top Tapping Machine Belt Driven Reviews

BUCKTOOL BD4801 Bench Belt Sander 4 in. x 36 in Belt and 8 in. Disc Sander with 3/4HP Direct-drive Motor

  • POWERFUL MOTOR: The belt and disc sander is directly driven by the motor shaft, 3/4 HP High Power Motor and 3450 RPM Disc Speed provide efficient and stable output.
  • FLEXIBLE BELT: This belt of the benchtop belt sander is 4x36-inch and 80-grit, and it can be placed horizontally or vertically to meet various needs, the cast aluminum worktable can be tilted 0-45 degrees, this makes this machine better suitable for all kinds of woodworking jobs.
  • STABLE DISC: The diameter of the disk is 8-inch, a heavy steel cover is added to prevent the disc from shaking. There is a miter gauge appliable for fixing the angle of the wood, and the cast aluminum work table also can be adjusted.
  • PROFESSIONAL DESING: Combining decades of woodworking experience, we have created a machine that is more suitable for users. 2 work tables for both disc and belt, 2 dust ports allows a dustfree operation when connecting with a dust collector, and sturdy cast aluminum base with rubber foot prevents vibrations.
  • MAINTENANCE FREE: This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before, but if you want to sharpen metal, change the sanding belt/disc then you will be good to go.
Check Stock

Belt Drive No More 415 Chain for 2 Stroke 66cc 80CC Engine Motorized Bicycle

  • Package include: 1 x Drive Pulley Diameter: 39mm (11-12T sprocket equivalent) 1 x Rear Wheel Pulley Diameter: 190mm (50T sprocket equivalent) 1 x T-Belt Type: 5M-1350.
  • Smooth acceleration: The T belt has the advantage of putting down the torque of the engine much more smoothly and gradually than the chain drive counterpart. Using a belt driven motorized bike you won’t feel a sudden tug when you twist the throttle, just smooth acceleration..
  • Easy to maintain and clean: T-belts also do not accumulate dust or dirt and need far less maintenance - like lubrication - when compared to chain driven design..
  • Little noise: No more noisy metal chain. The belt driven design emits very little noise while in use..
Check Stock

US Stock M3-M16 Electric Tapping Machine 375rpm 110V Flex Tapping Arm Machine ANSI Full Set Tap Collets Holder Included

  • M16R electric tapping machine has manual, automatic and gap 3 modes for your choice. Automatic mode can control the depth of tapping effectively to realize blind tapping.
  • Tapping angle: Universal. Tapping Capacity Stainless steel/Steel: M3-M16, Aluminum: M3-M16, Working Area Horizontal: 1045mm(41.1inch) Weight: 32KG (70.5lb.) Vertical: 400mm adjustable.
  • Main parts for tapping machine, import servo motor, HD human machine interface, high-precision cantilever bracket, universal head(tapping for vertical/horizontal), import tap collet(standard).
  • Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • 1-year warranty. Free shipping to your door. Standard equipped tap collet size: ANSI standard M3,M4,M5,M6-M8,M10,M12,M14 and M16. 8PCS in total. If you need ISO/JIS or DIN standard collet, please leave a message.
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories:Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

WORKPRO Disc Belt Sander, 1 in. x 30 in. Belt & 5 in. Sanding Disc, Power Combination Sander for Woodworking, including 6pcs Sandpapers

  • Belt & Disc Sander:This combination sander is professional for your woodworking, including 1 x 30-inch belt and 5-inch disc, with extra 3pcs 100-Grit belts and 3pcs 80-Grit discs, which can be used for sanding projects on various materials..
  • Adjustable Easily: The sanding disc work table can be adjusted from 0 to 45 degrees to meet your different angle needs. Using it with miter gauge is suitable for contour sanding and shaping. Great sanding tools for woodworking and all your DIY needs..
  • Powerful Sander: The benchtop belt/disc sander is driven by motor directly, providing 3160FPM of belt speed and 3450 RPM disc speed, which shows powerful performance than traditional design..
  • Sturdy Cast Iron Base: This sanding machine is equipped with sturdy cast iron base that could fix on the workbench to prevent vibrations, providing stability and improving work efficiency..
  • 2 Dust Ports: This belt&disc sander is equipped wit 2 dust ports, collecting the dust from belt and disc, which can keep your work environment more clean. Note: belt/disc dust port size is 1.7inches (outer) and 1.5inches (inner)..
Check Stock

Replacement for Washer Washing Machine Direct Drive Drain Pump 3352293

  • This is a Brand New Washing Machine Replacement Drain Pump.
  • This is a direct drive pump- not belt driven..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Sunny Health & Fitness Upright Exercise Bike with Electromagnetic Resistance, Programmable Monitor and Pulse Rate Monitoring - SF-B2883

  • ...ULSE SENSORS: Keep tabs on your heart rate when you grab onto the pulse sensors as you exercise on the magnetic upright exercise bike. The heart rate data can be used to personalize the pre-installed heart rate-driven workout programs. The ergonomic handlebars are designed to help you maintain support on the cardio machine as you exercise..
  • PERFORMANCE MONITOR: Track your speed, RPM, time, distance, calories burned, wattage, heart rate, and workout programs on one backlit screen when you plug in the upright cycle bike..
  • WORKOUT PROGRAMS: This stationary bike comes with 24 pre-installed workout programs, including a BMI calculator, 12 resistance-based workout presets, 5 heart rate-driven workout presets, a wattage-based preset, time and distance presets, and 4 manual preset..
  • STURDY BUILD: Designed for long-lasting workouts, this bike is crafted with a steel frame that can support up to 240 LBS. Enjoy maximum stability when you workout with ergonomic handgrips, floor levelers, and a universal strap..
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock