Top Taper Pipe Tap Set Reviews

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...s (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
Check Stock

IRWIN 1908ZR Tap 1-1/4\-11 1/2\ Npt Pipe

  • Nominal size of the tap is that of the pipe fitting being tapped.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...riors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carryin....
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...riors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carryin....
Check Stock

QWORK 1/2\ - 14 NPT Pipe Tap, Carbon Steel, for Clean and Re-thread Damaged or Jam Pipe Threads

  • Characteristics:QWORK 1/2"-14 NPT Pipe Tap is an ideal choice for pipe fittings..
  • Size: 1/2" size with 14 NPT (National Pipe Taper)..
  • Usage: Used to cut internal threads of pipes..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Acrylic Tobacco Pipe Mouthpiece Long Stem 9 mm Activate Carbon Filter Reading Smoking Pipe Mouthpiece

  • Acrylic pipe mouthpieces,durable and portable..
  • Bent taper mouthpiece design, long pipe, very useful tobacco pipe stem ..
  • Smoking pipe Length:210 mm,Reading Pipe Long Bent Taper Mouthpiece.
  • Outside of filter is 10 mm ,wood and activate carbon filter can be inserted..
  • Package included :1 x Reading Pipe Long Bent Taper Mouthpiece.
Check Stock

1/4-18 NPT HSS Taper Pipe Tap, High-Quality High-Speed Steel 6542, Used For Conventional Machine Tapping Or CNC Tapping, Can Tap Steel And Stainless Steel.

  • 5/8" - 14 HSS American National Standard Taper Pipe right hand thread tap.
  • 5/8" is nominal pipe size - the actual thread dimension is greater than 5/8".
  • The angle between the sides of the thread is 60 deg.
Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock