Top Taper Bore Pulley Reviews

Terre Products - V-Groove/V-Belt Drive Pulley, 3.5'' Outside Diameter, 5/8\ Bore, Die Cast, Z3A Zinc Alloy, Compatible Replacement for Chicago Die Cast 350A

  • Fits Shaft Dia.: 1/2 in. Pulley Bore Type: Fixed Bore.
  • Standard V-Belt Pulley: For V-Belt Section 3L, 4L, A, AX..
  • Durable: Cast Iron material, solid construction, anti-corrosion..
  • Service: Enjoy a smooth&worry-free return service within a month..
Check Stock

Garage Door Lift Cable 3/32 (for 8)

  • 4" Heavy Duty Sheave Pulley - 4" Garage Door Pulley Sheave - 4" Riveted Sheave - Zinc Plated.
  • Use on Residential Doors/ Light Commercial.
Check Stock

BIQU GT2 5mm Bore Aluminum Toothless Timing Belt Idler Pulley for 3D Printer 6mm Width Timing Belt (Pack of 5pcs)

  • Toothless timing blet pulley, use with 20T 5mm bore idler pulley.
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

10 Pcs 3 Dimensional Printer Models Pulley POM Plastic Pulley Models V Groove Ball Bearings Pulley Passive Round Wheels Roller Black

  • Plastic pulley bearing is V-slot model passive round pulley for 3 Dimensional printer, 100% brand new and high quality.
  • This V-slot model pulley is 25mm outer diameter, 11mm thickness, 5mm bore.
  • widely used for wheel alignment, wire rail, pulley.
  • This pulley bearing adopt of motor grade bearings, rust resistant, wear resistant, operate smoothly.
  • The outside of the wheel is made of POM material with good physical, mechanical and chemical properties, especially with excellent friction resistance.
  • Totally 10 pcs passive round pulley, ordinary precision, fit for the general usage of low rotation speed and low load, etc.
Check Stock

BEMONOC 1Pcs 22 Tooth 3M Timing Pulley Width 16mm Bore 6mm for HTD 3M Timing Belt Width 15mm Machine Drive Belt

  • ✔HTD 3M Timing pulleys for high torque transmission/CNC machines,Laser machine,Engraving machine.
  • ✔Quick and easy installation and adjustment, time-saving and efficient.
  • ✔If you need other bore of this pulley, pls contact us, we can customize all kinds of timing pulley!.
  • ✔Package: 1PCS x 16 Teeth Bore 6mm + 2PCS x set screws + 1PCS x Allen Key.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Sanfurney Magnetic Garage Door Windows Panes Arch Style Pre-Cut Faux Fake Decorative Window Decals for 2 car Garage Kit, 8 Sections 12.1\x 8.1\

  • Replacement Pulley: Easily replace your old or worn garage pulley for smoother door operation.
  • these garage door pulleys can be used as stationary or spring pulleys.
  • Heavy Duty Pulley: It has a 200lb load capacity and is rated for 35,000 cycles.
  • designed for 1/8-inch cables on overhead sectional garage doors with extension springs.
  • Durable Construction: This door pulley is made of heavy-duty galvanized steel.
  • has a 3/8" bore or axle hole and 10 commercial-grade steel ball bearings.
  • Set Includes: Our garage door pulley kit includes a 4" pulley, fork, nut, and bolt for easy installation.
Check Stock