Top Tail Light Wiring Reviews

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • ...bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This utility led trailer light kit has everything you need: 1X Rectangle LED combination stop turn tail light(37 Diodes),1X Rectangle LED combination stop turn tail light with license illuminator(48 Diodes), 2X amber LED marker lights ,25-ft wiring harness(21.65ft wiring harness and 3.93ft wiring harness),license plate bracket and mounting hardware..
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

Partsam 6 Inch Oval Red Led Trailer Tail Lights Smoked Sealed Grommet Mount Stop Turn Tail Brake Marker Lights for Trailer Truck RV Grommet and Plugs Included Waterproof 12V (Pack of 6)

  • ...TALLATION - Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer lights to be installed in both horizontal and vertical orientations. Powering the oval tail lights off of the included industry standard three prong harness, one can have these tail lights installed in no time.
  • DURABLE WATERPROOF DESIGN - Each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather.
  • Package and Warranty: Package includes 6PCS 6 inch Smoked red oval LED tail lights,6Pcs Rubber Grommets and 6Pcs industry standard 3-prong plug with attached wiring Pigtails.
  • We truly offer 1 year warranty! If have any questions or issues about our smoked trailer lights lights, Please feel free to us and we will reply in 24 hours.
Check Stock

CZC AUTO 12V Submersible LED Trailer Tail Light Kit for Under 80 Inch Trailer Boat utility Trailer Waterproof (Trailer light kit)

  • ...ent Waterproof/Submersible Lights for Boat Trailer. Sonic Welding Sealing Technology ensures sealing solidity of the tail lights. Every possible gap is sealed well with marine grade glue, such as wire's entrance holes and edge of the lens.
  • Easy to install the submersible trailer lights. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on instruction sheet.
  • CZC AUTO, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PLEASE NOTE: Any problem in using our submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

Bright Motorcycle LED Tail Light with Turn Signals for Honda 91-96 CBR600F/F2/F3;1996 CBR 600SJR,Smoke

  • LED Tail Lights with built-in Turn Signals （Bright2wheels INT） – The original 1st Gen. technology. LED tail light included with integrated turn signals.
  • Maximum Quantity High-Brightness Led installed, Improves visibility and appearance.
  • Quick and Easy Installation – Offering near plug-and-play use for both the red led running light and the brake light, as shown in the pictures.
  • comes with fast connectors, wiring diagram, and resistors or flasher relay if necessary for the wiring of built-in turn signals.
  • We offer Free Standard Shipping for domestic orders, and we dispatch our Order within 1 working day（Monday-Friday, Excl. holidays）.
Check Stock

Hopkins Towing Solution Hoppy 43385 Trailer Wiring Kit for 03-06 Toyota Tundra

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Toyota 4Runner.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

LivTee Waterproof 4 Round Red LED Trailer Lights Tail Brake Stop Turn Parking Light Kit with Grommet and Plug for Boat Trailers RV Jeep Trucks 2pcs

  • BRAKE & TAIL LIGHT - This 2-piece red LED light set is designed for multi-function use as a brake or stop light, turn signal and tail light. Mount to....
  • BRIGHT & HIGHLY VISIBLE - 12 bright LED diodes brilliantly illuminate and cut through darkness & low-visibility conditions to light up the rear of....
  • EASY INSTALLATION - Each light comes with an industry standard 3-prong plug with attached 12" wiring. Wiring is pre-sliced ​​for quick....
  • DURABLE WATERPROOF DESIGN - Each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough....
  • Warranty: fully ONE YEAR guaranteed for the manufacturer defect. Any other problem please feel free to contact us, we are always here to satisfy all....
Check Stock

7-Way RV-Standard 1 Ft (16\) Trailer wire Extension- Male to Female

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Mitsubishi RVR, Outlander Sport and Lancer.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
  • High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
  • 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..
Check Stock

Hood Vent Decals Inserts Stickers for 2010-2018 Dodge Ram 2500 & 3500 HD (Flat Black)

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Dodge Ram 1500, 2500 and 3500.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56403 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Volkswagen Tiguan

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Toyota Tacoma, T100 and Hilux.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 56369 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Compass , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Honda Odyssey (factory tow package required).
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

United Pacific (2) 1960-66 Chevy Pickup Truck Incandescent Tail Light Kits / 61 62 63 64 65

  • Fits 1960 - 66 Chevy Fleetside Pickup Trucks..
  • Pair Of Complete Incandescent Tail Light Assemblies..
  • Includes Housings, Lenses, Gaskets, Sockets, 1157 Bulbs And Wiring..
  • Red Polycarbonate Lenses With Chevy Logo..
  • Tail Light Bezels Sold Separately In Our Store..
Check Stock