Top Tail Lamp Mould Reviews

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..

Check Stock

Bike Lights Front and Back, Fully Dynamo Bike Light Set, Motorized Friction Generator, 200 Lumens, Waterproof, Easy to Install, Never Need Battery Bike Light

【Fit for Most Bicycles】This headlight and tail light kit fits for BMX Bike, for Cruiser, for Dirt Jumper, Electric Bike, Folding Bike, Kids Bike, Mountain Bike, Racing,Tricycle, etc..bike friction light.
【High Brightness】High brightness provides maximum visibility to enhance your road safety. Low power consumption and energy saving, long life span. High quality plastic lens offer superior protection and a high impact resistance, ultra durable..
【Waterproof】Waterproof, safety ,environmental protection, ideal for Bicycle amateur /lover and bike Travelling. Dynamo output: 12V, 6W, can be used for long time..
【Professional Manufacturing】100% Brand New and High Quality Headlight Tail Light Kit. Press your bicycle lamp on wheel when you need to use it, put the power head of generate electricity lamp coincide with the wheel, then Can drive the generator power generation through the Friction..
【Easy to Install】The headlight and tail light kit is easy to install, perfect fit your motorcycles, Motorized Bikes or Bicycles. Put your generate electricity lamp to install it to your bicycle front fork or Bicycle Carrier after install front headlight and taillight..

Check Stock

Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)

5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation..
Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights.
Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc..
Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility....

Check Stock

Bicycle Motorized Bike Friction Generator Headlight Tail Light Kit 12V 6W

Fast and Free Domestic Shipping from the USA! One Year Warranty!! Ships within 24 Hours after getting the payment!! Saturday shipping!!.
Motorcycle Bicycle Bike Friction Generator Dynamo Headlight Tail Light Set 12V 6W.
Package Includes: 1 X Dynamo power supply 1 X Head Lamp 1 X Tail Lamp 2 X Fixing tools 1 X Extra wire.
For most bicycle, motorized bikes, BMX Bike, Cruiser, Dirt Jumper, Electric Bike, Folding Bike, Kids Bike, Mountain Bike, Road Bike - Racing, Road Bike - Touring, Tricycle.
We guarantee all products passed strict tests before selling on Amazon!!! If you have any question, please contact us immediately. We will try our best to give you a satisfactory reply within 24 hours!!!.

Check Stock

DTR2017 Smoked LED Tail Light, Integrated Motorcycle Rear Brake License Plate Lights for Harley Dyna, Road King, Street Glide, Sportster 1200, Softail and Touring

Package includes 2 Pieces UTV tail lights Replacement for Polaris Ranger 570 900 1000 / Brutus HD / General rear tail lights. This new Led tail light can directly replace your stock tail light and fit both your driver side and passenger side. Replacement for Part Number: 2412774.
Each UTV tail light has 14 piece high quality 3528 LED chips with more than 30K working hours, two step lighting and can work as both running light/tail light and brake stop light.
Compatibility of the Rear tail light: Compatible with Polaris Ranger 570 full size tail light/Ranger 900 tail light/Ranger 1000 tail light/Compatible with Ranger Brutus HD tail light/Compatible with Polaris Ranger XP 1000 tail light/Compatible with Polaris Ranger XP 900 tail light/Compatible with Polaris Ranger Crew XP 1000 tail light/Compatible with Polaris Ranger Crew XP 900 tail light/Compatible with Polaris Ranger Crew 570 tail light/Compatible with Polaris Ranger Diesel tail light etc..
This tail light has some difference form the stock tail light. It does not have the reflective sticker on the side that your stock tail lamp has. Of course you can use the 3-M reflector tape for it. Also this tail light assembly does have inserts for bolts. You will need to ch....

Check Stock

Drawealth Touch Control Traditional Table Lamp Set of 2,3-Way Dimmable Farmhouse Bedside Table Lamps with 2 USB Charging Ports Vintage Rustic Table Lamps for Living Room Bedroom Office Study

...: This is a retro table lamp, selected high-quality handmade fabric lampshade light is softer and more layered, the bold hardware bracket makes the lampshade more firm and does not tilt, the resin lamp body is natural and environmentally friendly, the square resin base and PVC non-slip pad are more stable, handmade Mould opening and antique craftsmanship show noble quality.
Multi-function Touch Base: This touch control nightstand lamp has a multifunctional base with 2 USB ports (5V/2.1A) and AC Outlet to meet the daily charging of electronic products (kind, mobile phone, pad). The base is also equipped with a touch panel, which can be touched anywhere on the panel Can console light This is the perfect choice for touch bedside lights. You don’t have to worry about not finding the switch at night. The exquisite and practical design makes your life more convenient.
3-Way Dimmable Touch Control: This traditional touch desk lamp can adjust the most suitable brightness according to the use scene. The low-end 5% can be used as a rest and relaxation night light, the mid-range 50% can be used as a reading eye-protection desk lamp, and the high-end 100% can be used as a work, study and office desk lamp. Satisfy most of your scenes.

Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

...is is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet..
Warranty: We truly offer 1 year warranty! If have any questions or issues about our 3/4 led marker lights, Please feel free to us and we will reply in 24 hours.

Check Stock

Self-generating Electricity Upright Cycle Generator 800W For Charge 36V Stationary Bike Dynamo Electric Bike Generator

Fast and Free Domestic Shipping from the USA! One Year Warranty!! Ships within 24 Hours after getting the payment!! Saturday shipping!!.
Motorcycle Bicycle Bike Friction Generator Dynamo Headlight Tail Light Set 12V 6W.
Package Includes: 1 X Dynamo power supply 1 X Head Lamp 1 X Tail Lamp 2 X Fixing tools 1 X Extra wire.
For most bicycle, motorized bikes, BMX Bike, Cruiser, Dirt Jumper, Electric Bike, Folding Bike, Kids Bike, Mountain Bike, Road Bike - Racing, Road....
We guarantee all products passed strict tests before selling on Amazon!!! If you have any question, please contact us immediately. We will try our....

Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..

Check Stock

Boine Compatible With 2016 2017 2018 2019 2020 Toyota Tacoma Pickup Right Passenger Side Red Tail Light Housing Replace 81550-04170

【COMPATIBLE WITH】2016-2021 Toyota Tacoma. (NOTE: The lamp housing and lampshade are all red. Please compare with the tail lamp before purchase.).
【HIGH QUALITY】Made of high-quality ABS plastic, this taillight is durable and make your daily driving safer..
【EASY INSTALLATION】Direct plug and play. No Installation Guide or Instruction Included, it is recommended to find installation video or professional installation..
【PACKAGE INCLUDE】1× Right Passenger Side Tail Light Housing..
【WARRANTY】We provide one year warranty. If you are not satisfied with the product, please contact us as soon as possible and we will solve the problem immediately..

Check Stock

Headlamp 4 Modes Super Brightest Water-proof Flashlight With Zoomable led With 18650 Rechargable Battery And Two Charger

USB Rechargeable Head Lamp - USB charging cable enables you to recharge from any USB Device, Powered by 2* 18650 Rechargeable Batteries, could last....
3 Modes & Tail LED Warning Light - 3 Modes: high,low,SOS. You can control 3 modes through the switch, which is easy to operate. The red tail light of....
Adjustable Headlight - The headlamps can be 90 ° Adjust the direction of the light..
IPX4 Waterproof Headlamp - Head lamp life waterproof, can adapt to all kinds of weather, convenient for you to work..
Zoomable Head Light - Wide to narrow beam zoom. It can be adjusted according to your work..

Check Stock

4 Pack Tray Silicone Molds

What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....

Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....

Check Stock