Top Table Saw Fence Reviews

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Grizzly Industrial G0701-19 5 HP Ultimate Bandsaw

  • Blade tension indicator quick change blade release/tensioning with blade tracking window.
  • Deluxe cast iron fence with extruded aluminum re-saw fence w.
  • Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table.
  • Fence adjusts for blade lead includes scale magnifying window and 1-Inch blade.
  • Micro adjusting rack and pinion table tilt and height scale measurement.
  • Miter gauge foot brake stop rack and pinion upper guide adjustment and 4-Inch dust port x 2.
Check Stock

CNCEST Mini Table Saw,110-240V 8000 RPM Portable Table Saw Small Tablesaw Cutting Machine Benchtop Table Saw w/ 60MM HSS Saw Blade for DIY Wooden Model Crafts Metal,Ceramic Tile Glass Cutting

  • Portability: The mini table saw for crafts features with small size, easy to transport and store..
  • Convenient Adjustment: The gear frame and pinion telescopic fence of mini table saw make the fence adjustment fast, smooth and accurate, and the precision frame and pinion system..
  • Various Cutting: Cutting Depth of portable table saw: About 10mm, Rated Speed: 8000 Rpm, The fence can be adjusted quickly and smoothly to achieve precise cutting..
  • Material: The tablesaw uses Pmma+Abs Material, Model: T555-1, Motor Model: 555 Double Ball Motor..
  • Guaranteed Sturdiness: Metal rolling cage of saw table ensures durability on the job site..
Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

  • Remarkable Cutting Performance: This portable table saw features with high-quality 15 Amp motor bout low in noise, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. Heavy duty table saw frame effectively prevents table from turning over during cutting..
  • Convenient Bench Table Saw: Our products feature a composite ergonomic design.The on-board storage system to facilitate your wrenches and push rods when not in use. In addition, a safety switch can control the table saw frame and provide overload protection. And 10 inch table saw can be used without bracket, convenient outdoor cutting wood..
  • Coated Aluminum Table top & Premium Blade: With coated aluminum table top, this table saw can reduce additional friction for smoother sliding., while with 26 "tear capability it can easily tear larger wood materials. The watch saw has a 36T carbide blade and is designed with a transparent protection and tearing knife to protect you from accidental injuries and flying debris..
  • Height Adjustment & Double Bevel Cut: Featuring a double bevel cut from 0-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slot....
Check Stock

VEVOR Table Saw Fence System, 57'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 57-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

VEVOR Table Saw Fence System, 37'×57' Classic Table Saw Fence Rail, Metric/Imperial Scale, Adjustable Hole Saw Fence System, w/Front Guide Bar Table Saw Fence, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The miter saw fence system features a self-adhesive scale and magnified cursor to provide fast and accurate fence positioning. The self-stick measuring tape mounts directly to the fence and features high visibility numerals and in both metric and imperial scales..
  • Sturdy and Secure: Simple cam lever action locks the fence solidly in position, and torsion box design means no deflections while guiding wood. The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge 37-Inch maximum rip to the right of the blade. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw. It comes with a guiding rule, front guide rail and rear guide rail, and a set of accessories to facilitate your work..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. The Steel construction Ensures that the fence is parallel to the blade. It offers quick ripping and straight cuts..
Check Stock

RIKON Power Tools 10-326 14\ Deluxe Bandsaw

  • Three Innovative, Patent Pending features make adjusting this redesigned band saw easier than ever before!.
  • Spring Loaded, Tool-Less Blade Guides – easy & fast setting of the guides without wrenches!.
  • Quick-Adjust Rip Fence – adjusts for drift with the simple turning of a few knobs! No tools needed.
  • Quick-Lock Table Trunnion System – handy lever and gear unlock and set table angles in seconds!.
  • Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6” give added support of lumber being ripped or re-sawn.
Check Stock

Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw....
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, extremely portable, and jobsite tough. Our products are heavy-duty, yet fast and....
  • EASY & SMART DESIGN: Quickly allows you to shift table lengths left and/or right of the saw. Use your own tape with the Measuring System, and you....
  • FAST & ACCURATE CUTTING: Cutting trim or multiple boards to specific lengths takes time. You will spend half your time at the saw, so you can spend....
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our products. We are committed to providing the highest....
Check Stock

Table Saw Fence System, Classic Table Saw Fence Rail, Metric/Imperial Scale, Table Circular Saw Fence &Guide, Upside Down Backet Set, Tablesaw Fence Slide for Easy Gliding

  • Heavy-Duty Rip Fence: The self-stick measuring tape mounts directly to the fence and features high visibility numerals.
  • Sturdy and Secure: The paint baking process is wearing resistance and gloss..
  • Smooth Sliding: Long rails provide a huge rip to the right of the blade..
  • Complete Tools: This table saw sled is easy to install and set up on any brand of saw..
  • Extensive Uses: Table saw fence system and rail fit a variety of saws. Suitable for flip-chip electric circular saw.
Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • 【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting..
  • 【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and p....
Check Stock

Evolution - RAGE5-S Power Tools RAGE5S 10\ TCT Multi-Material Table Saw, 10

  • ADJUSTABLE BLADE ANGLE & HEIGHT: With hand wheel for blade height adjustment, the blade height of the table saw can be adjusted to meet your specific needs. What’s more, the blade angle can also be adjusted to provide 90°cross cutting and 0-45°bevel cutting. And it features 60T blade which can yield a smoother cut..
  • PORT FOR DUST COLLECTOR: The 10inch table saw is designed with port for connecting dust collector at the back (Note: It does not come with dust collector), which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use..
  • POWERFUL PERFORMANCE: The no load speed of the table saw is 5000RPM, which allows it to cut most wood with ease. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably than those without extensions..
  • RIP FENCE & ANGLE STOP FOR PRECISE CUTTING: Designed with self-aligning rip fence with parallel guide, the portable table saw can deliver a more precise cutting. And its angle stop can help you to adjust the wood to the appropriate cutting angle..
Check Stock

WoodRiver Adjustable Fence Clamps, 2 Piece

  • This fence will improve your band saw instantly. Easy to adjust for blade lead with angle bracket design. Will fit most 14" band saws with tables up to about 16" square..
  • Bolts directly to existing holes in the 14" Delta, Jet, Ridgid, Powermatic (without extension table) & Porter Cable. May be able to be attached to other 14" band saws by drilling four holes, see instruction sheet..
  • The most rigid fence available. Two separate fence position locks at both ends and two separate blade lead locks as well..
  • See the HD Band Saw Circle Jigs - 7286-7290 too. Clamps to any band saw to cut circles or arcs from 3" diameter up to 189.
Check Stock

Shop Fox W1837 10\ 2 hp Open-Stand Hybrid Table Saw

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
Check Stock