Top T10 Fluorescent Lamp Reviews

(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement

✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..

Check Stock

4FT LED Bulbs Light 5000K, 18W(40W Equivalent), 2000LM High Brightness,Daylight, Double Ended Power, Require Ballast Bypassing, 48 Inch T8 T10 T12 Fluorescent Light Bulbs Replacement (4 Pack)

✔ENERGY SAVING: Save 65% on your electricity bill! Replace 40W fluorescent tubes by 18W 4ft led bulbs.The service life exceeds 50,000+ rated hours, which greatly reduces the frequency of lamp replacement..
✔SUPER BRIGHT & CLEANER LIGHT: 112 lumens/watt, 5000K daylight. High quality LED chips can sustained provide high brightness.Instant on,no any delay, no flicker, no noise, no mercury, no uv..
✔EASY INSTALLATION: No ballast--existing ballast has to be removed or bypassed. Refer to our installation guide for details.Easily fitted to replace traditional T8 T10 T12 fluorescent tube lamps..
✔SAFETY:Our 4 foot led light bulbs adopts a shatter-proof plastic cover, and the special flame-retardant materials at both ends can effectively prevent fire hazards..
✔HASSLE FREE WARRANTY - Romwish Provide a 3-year unlimited warranty! If you aren't satisfied with our 4ft led light bulbs,pls feel free to contact with us for a quick solution..

Check Stock

JESLED T8/T10/T12 4FT LED Bulbs - 24W Dual Row V Shaped LED Light Bulb, 6000K Cool White, Replacement Fluorescent Bulbs (40-65W Equivalent), Clear Cover, Ballast Bypass(25-Pack)

... radio, remote control door, etc., which may cause EMI.(Make sure the original ballast is REMOVED before installation).
【BRIGHT, ENERGY SAVING】 - JESLED V Shape T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly economize 63% on your electricity bill when you replace 65watt old fluorescent tubes with high output 24watt 4ft LED light bulbs..
【LONG LASTING TUBE】 - JESLED shatterproof 4ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【FLUORESCENT TUBE REPLACEMENT】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issue..

Check Stock

JESLED 4FT T8 LED Tube Light Bulbs, 24W 5000K Daylight, 3000LM, 4 Foot T12 LED Replacement for Flourescent Fixtures, Frosted, Double Ended Power, Bypass Ballast, Garage Warehouse Shop Lights (25-Pack)

【BRIGHT, ENERGY SAVING】 - JESLED dual row T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly save 63% on your electricity bill when you replace 65watt old fluorescent tubes with high output 24w 4foot LED light bulbs..
【LONG LASTING TUBE】 - JESLED shatterproof 4ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【EASY BALLAST BYPASS INSTALL】 - JESLED T8 4Foot LED light bulbs are dual-end powered and require a simple, energy-saving, ballast bypass installation. Refer to our installation guide for details. NOTE: Please install this item away from the radio, remote control door, etc., which may cause EMI. (Make sure REMOVED the original ballast and REWIRE before installation).
【FLUORESCENT TUBE REPLACEMENT】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if ....

Check Stock

JESLED T8 4FT LED Light Bulbs, 24W 6000K-6500K, 3000LM, T12 4 Foot LED Tubes Replacement for Fluorescent Fixtures, Clear, Dual Ended Power, Bypass Ballast, Garage Warehouse Shop Lights (25-Pack)

...radio, remote control door, etc., which may cause EMI.(Make sure the original ballast is REMOVED before installation).
【Bright, Energy Saving】 - JESLED dual row T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly economize 63% on your electricity bill when you replace 65watt old fluorescent tubes with high output 24watt 4ft LED light bulbs..
【Long Lasting Tube】 - JESLED shatterproof T8 4Foot LED light bulbs have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【Fluorescent Tube Replacement】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【Warranty】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3-year warranty. Please contact us directly if you meet any issues..

Check Stock

JESLED T8 T10 T12 LED 2FT Light Bulbs,12W 1320LM,6000K-6500K Daylight White,2 Foot LED Fluorescent Tube Replacement,Super Bright,Dual Ended Power,Ballast Bypass,Clear Cover(4-Pack)

【Bright, Energy Saving】 - JESLED dual row T8 T10 T12 2ft LED light bulbs can illuminate your space with 1320+ lumens. Instantly economize 66% when you replace 36watt old fluorescent tubes with high output 12watt 2ft LED light bulbs..
【Long Lasting Tube】 - JESLED shatterproof 2ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 2ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【Easy Ballast Bypass Install】 - JESLED T8 2Foot LED light bulbs are dual-end powered and require a simple, energy-saving, ballast bypass installation. Refer to our installation guide for details. NOTE: Please install this item away from the radio, remote control door, etc., which may cause EMI. (Make sure REMOVED the original ballast and REWIRE before installation).
【Fluorescent Tube Replacement】 - JESLED T8 2ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【Hassle-free Warranty】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issues....

Check Stock

JESLED T8 4FT LED Tube Light Bulbs, 24W 5000K Daylight, 3000LM, 4 Foot T12 LED Replacement for Flourescent Tubes, Ballast Bypass, Dual-end Powered, Frosted, Garage Warehouse Shop Lights(12 Pack)

...radio, remote control door, etc., which may cause EMI.(Make sure the original ballast is REMOVED before installation).
【BRIGHT, ENERGY SAVING】 - JESLED dual row T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly economize 63% on your electricity bill when you replace 65watt old fluorescent tubes with high output 24w 4foot LED light bulbs..
【LONG LASTING TUBE】 - JESLED shatterproof 4ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【FLUORESCENT TUBE REPLACEMENT】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issue..

Check Stock

JESLED T8 T10 T12 LED 3FT Light Bulbs,18W 1980LM,6000K-6500K Daylight White,3 Foot LED Fluorescent Tube Replacement,Super Bright,Dual Ended Power,Ballast Bypass,Clear Cover(4-Pack)

【EASY BALLAST BYPASS INSTALL】 - JESLED 4 ft Type B LED Light Bulb are dual-end powered and require a simple, energy-saving, ballast bypass installation. Refer to our installation guide for details. NOTE: Please install this T8 4Foot bulbs away from the radio, remote control door, etc., which may cause EMI.(Make sure the original ballast is REMOVED before installation).
【Bright, Energy Saving】 - JESLED dual row T8 T10 T12 3ft LED light bulbs can illuminate your space with 1980+ lumens. Instantly economize 66% when you replace 54watt old fluorescent tubes with high output 18watt 3ft LED light bulbs..
【Long Lasting Tube】 - JESLED shatterproof 3ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 3ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【Fluorescent Tube Replacement】 - JESLED T8 3ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【Hassle-free Warranty】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issues..

Check Stock

JESLED T8 T12 4FT LED Tube Light Bulbs, 24W 6000K-6500K, 3000LM, 48 Inch LED Replacement for Flourescent Tubes, Ballast Bypass, Dual-end Powered, Clear, 4 Foot Garage Warehouse Shop Lights (12-Pack)

【BRIGHT, ENERGY SAVING】 - JESLED dual row T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly economize 63% when you replace 65watt old fluorescent tubes with high output 24watt 4ft LED light bulbs..
【LONG LASTING TUBE】 - JESLED shatterproof 4ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【EASY BALLAST BYPASS INSTALL】 - JESLED T8 4Foot LED light bulbs are dual-end powered and require a simple, energy-saving, ballast bypass installation. Refer to our installation guide for details. NOTE: Please install this item away from the radio, remote control door, etc., which may cause EMI. (Make sure REMOVED the original ballast and REWIRE before installation).
【FLUORESCENT TUBE REPLACEMENT】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly if you meet any issue.....

Check Stock

2FT LED Tube Lights, 24' 8W(25W Fluorescent Bulb Replacement) LED Tube Light Fixture, Two Pin G13 Base, 6000K, Works Without Ballast, Dual-Ended Powered, Frosted Cover, Pack of 4

✔Pack of 4, 8W G13 LED Tube Light Bulbs, Great replacement of F18T8 F20T10 F20T12/CW Fluoresent Lights, 1120LM, 6000Kelvin, Dual End Powered, LED Tube lights 2FT come on quickly and reliably, bulbs are perfect for place where you need lots of light, such as workshop basement garage barn.
✔ENERGY SAVING: Save 52% on your electricity bill! Replace 20W fluorescent tubes by 8W 2FT LED Tube Light . Reduce re-lamp frequency with a lifetime of 50,000+ rated hours (17 years with 8 hours/day 365 days).
✔EASY INSTALLATION: Existing ballast needs to be removed or by-passed. International standard shape for T8 LED Tube light 2FT. easily fitted Instead of traditional fluorescent tube lamps..
✔SAFETY: Like all other LED tubes on market, our T8 led tube lights 2FT take the less fragile plastic covers, so the special flame retardant material on the double ends is very important for avoiding the risk of fire disaster, which may caused by unexpected short circuit etc..
✔ QUALITY ASSURANCE - 3-year unlimited warranty, easy and fast replacement is offered if any quality issue.

Check Stock

24-Pack JESLED T8 U Clips Holder Bracket for 8FT LED Light Bulbs LED Fluorescent Tube Replacement Mounting Accessories Stainless Steel Lamp Support Lampholder Pipe Clamps to Prevent Sagging

24 Pieces T8 U clips/brackets/lamp holder for mounting T8 T10 T12 led fluorescent tube replacement( without screw )..
Stainless steel material, with plastic finish to protect the tubes, no scratch, ideal to prevent 8ft led light bulbs sagging..
Stable and easy to install, using one or two clips for each t8 8ft led tube light..
If you need 8ft single pin led light bulbs, please search “B074MC1FW3”, “B074MCTBVN”,“B075D7N2V4”..
JESLED offers 5 Years UNLIMITED warranty. Contact our customer service team 24/7!.

Check Stock

OhLectric OL-42575 Fluorescent Lamp Starter - Offers Flicker Free Start - Durable Bulb Start - FS-5 Rohs Compliance - Lamp Parts and Accessories - Ideal for 4, 6, and 8 Watts Lamps

High-quality material: This fluorescent lamps starter is made from premium grade material which is highly resistant against rust and other chemicals. Since it is rust free it can be widely used on outdoor light fixtures sure to give your lamp fitting a boost in startup time..
Rohs-5 compliance: This 2 pin FS-2 RoHS compliance certified starters are widely used for 4, 6 and 8 watts fluorescent bulbs. The compliance range decides the bulbs watts that can be used for that particular starter. These electrical starters are designed for efficient starting and long lamp life..
Flicker-free start: These fluorescent starters are widely used for a flicker-free start in the fluorescent bulbs. These starters provide required electrical supply to the bulbs and boost them up during their initial start. These starters also play a wide role in increasing the fluorescent bulb life..
Easy to install: Installing these starters is very simple! Using the 2 pins in the starter base you can easily fix it on the lamp base set. Without any complex tools or technicians assistance, you can install this fluorescent light starter. Use the starters with the respective watt bulbs for better results..
Wide usage: it can be widely used in fluorescent bulbs for efficient lamp start. Of....

Check Stock

Robertson 3P20116 eBallast, Instant Start, NPF, 1 or 2 Lamp F32T8, 120Vac, 60 Hz, Model ISU232T8120 BA (Replaces Robertson 3P20003, Model ISU232T8120 /B)

SECOND BREATH FOR FLUORESCENT LIGHT FIXTURES: Instead of buying new tube lights, save your money by replacing fluorescent light ballast from old magnetic technology to the new electronic 2 lamp T12 ballast. It is designed to serve 2 lamps conveniently..
INSTANT FULL BRIGHTNESS: Comfortable workspace is essential for healthy office organization. That's why sunlight lamp technology is so popular. With our rapid start ballast, you'll get bright light immediately and with no flickering, buzzing, or humming..
OBVIOUS CABLE'S COLORS AND COMPACT SIZE: Changing fluorescent light ballast is easy with our tube light ballast due to the popular Rapid Start Wiring color scheme. You need to match the same colors that your old lamp magnetic ballast had in most cases..
COMPATIBLE HOME OFFICE ESSENTIALS: Instant start ballast helps to enhance lamp life and is equivalent to many fluorescent ballast types. It can be installed on a desktop lamp, as of kitchen light ballast, or to any other light home office accessories..
SPECIFICATIONS: 120V 60HZ fluorescent lamp ballast 59/71W and 120-277V. For T12 fixture light bulb. 20 FT max lead remote mounting. Passive power factor correction. Measures 9.5"x1.7"x1.18" - beneficial for desk supplies storage. Weigh 1.7 LBS..

Check Stock