DINGGUANGHE-CUP T-Slot Milling Cutter Alloy Shank End Mill 8-10mm Shank for Metal Keyway Tool Tungsten Carbide Router Bit Steel (Cutting Edge Length : 25x10Hx12Dx90L)
- Package Including: 1pc T-Slot Milling Cutters.
Top T slot Milling Operation Reviews
uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
- T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
- Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
- Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
- Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
- Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
- T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
- Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
- Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
- Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
- Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
- T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
- Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
- Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
- Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
- Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
xiji T-Slot Milling Cutters, 16mm Cutting Dia 8 Flutes HSS T Slot End Mill High Speed Steel Keyway Knife HSSAL Straight Shank T Slot End Mill Keyway Cutter Woodruff Keyseat Set, 1pcs
- PREMIUM MATERIAL: This T Slot Cutter End Mill is made of high quality high speed steel (HSSAL) material, wear resistant and not easy to stick cutter. Woodruff key seat cutter can facilitate CNC processing and improve work efficiency..
- FEATURES: It Is A Special Tool For Processing T-Slots. The End Edge Of The Milling Cutter Has A Suitable Cutting Angle. The Cutter Teeth Are Designed According To Helical And Staggered Teeth, And The Cutting Is Stable And The Cutting Force Is Small..
- ADVANTAGE: The cutting edge is sharp and wear-resistant, it is not easy to break the edge, the surface is clean and free of burrs, and the finished workpiece has high smoothness. After The Straight Slot Is Milled, The T-Slot With The Required Precision Can Be Milled At One Time..
- DURABLE: The high-frequency welding process is adopted at the connection between the cutter head and the cutter body, which is durable and not easy to break the knife, which greatly improves the practical life of the cutter. T‑slot cutter has stable structure, excellent performance and long service life..
- WIDE APPLICATION: Used To Process T-Shaped Grooves On Various Mechanical Tables Or Other Structures. Suitable for milling steel, aluminum, copper, iron and non ferrous materials. It Has Sufficient H....
Carbide Dovetail Cutter 60 Degree 6 Flutes Slotting Milling Cutter Cutting Tool Metalworking End Mill Straight Shank Diameter 20mm/ 0.8in
- SPECIFICATIONS: Dovetail slot milling cutter, 60 degree angle and 6 flute design, the blade diameter is 20mm, with standard size and accurate cutting..
- HIGH EFFICIENCY: With fine grinding grooves, efficient and flexible operation, smooth direct chip evacuation, fast drilling speed and labor saving operation..
- CEMENTED CARBIDE: The dovetail slot mill is made of carbide material, which has high hardness, wear and corrosion resistance, has long service life..
- EASY TO INSTALL: The dovetail cutter has glossy surface without burrs, high grinding accuracy and stable size, with universal straight shank for easy installation..
- APPLICABLE MATERIAL: Suitable for processing stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metals and other materials..
MultifunctionWorktable Milling Working Cross Table Milling Machine Compound Drilling Slide Table For Bench Drill Adjustme X-Y（6330 SIZE）
- Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time..
- Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements..
- 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need..
- Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use..
- Wide Application Area: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines..
TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
TE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces
- Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
- For workholding during machining applications.
- 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
- Bridgeport type milling machines use Part No. 20402.
- Made from case hardened 1018 steel with a black-oxide finish.
GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)
- ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
- ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
- ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
- ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
- ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)
- ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
- ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
- ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
- ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
- ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.