Top T head Bolts Reviews

(10 Sets) 1/4-20x2-1/2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • INCLUDES: (20) Tee Bolts 1/4”-20 thread bolt and 3-1/2 long.
  • FUNCTION: Essential jig and fixture hardware designed with precision machined t-heads that fit inside routed grooves and t-slots, allowing the tightening and customization of your own jigs an easy task.
  • QUALITY: T-Bolts are made from high quality zinc-plated carbon steel for corrosion resistance, rust protection and long lasting durability.
  • DESIGN: Able to withstand strong torque with heavy usage, and won’t easily strip, nor over-tighten.
  • BOLT SIZE AND THREAD: Length 3. 5” | T-Shaped Heads 13/16” by 17/32” by 7/64” Thick | 1/4”-20 All Thread.
Check Stock

Lot 4 Each, 48

  • Lot of 4 each 3/4 wide x 3/8 high x 48 long.
  • Thick .100 sidewalls minimize bowing and twisting.
  • Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts.
  • Counter sunk holes drilled 3" from each end and then every 6 for #6 screws. Screws not included..
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

POWERTEC 71703 Table Saw Sled and Blade Guard Kit w/T-Track, Miter Bars, Crosscut Bladerunner, Flip Stop, Bolt and Screws Set

  • INCLUDES: 24” universal t track, 19” HDPE miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts.
  • FUNCTION: Provides you with an easy DIY kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors.
  • 100% SAFE: Makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw.
  • PREMIUM QUALITY: The t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability HDPE (high density polyethylene).
  • DIMENSIONS: Universal T-Track (24" long) | High Density Polyethylene bars 19" long x 3/4" x 3/8" | 3" Flip stop | Flat Head Wood Screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts.
Check Stock

POWERTEC Tee 1/4-Inch-20, 2-1/2-Inch, 20-Pack QTB1005 T-Slot 1/4”-20 Thread Size T-Bolt 2.5 Inch Long – 20 Pack, 20 x 2-1/2", Count

  • INCLUDES: (20) Tee Bolts 1/4”-20 thread bolt and 2-1/2 long.
  • FUNCTION: Essential jig and fixture hardware designed with precision machined t-heads that fit inside routed grooves and t-slots, allowing the tightening and customization of your own jigs an easy task.
  • QUALITY: T-Bolts are made from high quality zinc-plated carbon steel for corrosion resistance, rust protection and long lasting durability.
  • DESIGN: Able to withstand strong torque with heavy usage, and won’t easily strip, nor over-tighten.
  • BOLT SIZE AND THREAD: Length 2. 5” T-Shaped Heads 13/16” by 17/32” by 7/64” Thick 1/4”-20 All Thread.
Check Stock

Pactrade Marine Boat Tracker Versatrack Adjustable Drink Holder/Lund Sport Track Folding Adjustable Cup Holder (Black, 1 pcs)

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

Park Tool Preset Torque Driver, 5NM

  • ...mmended setting. Each tool is shipped pre-calibrated and tested for accuracy to industry standards (+/- 3%)..
  • 【EASY TO READ AND USE 】- This tool emits a click (that can be heard and felt) when a pre-set torque value is reached. A continent lock/unlock feature helps maintain desired torque values while tightening bolts. Force indicator markings on the wrench are clear and easy to read. Idea for use on stems, seat clamps, lever clamps, cranksets, rotors and more..
  • 【15PCS BIKE TOOL KIT】– Includes Hex: H2, H2.5, H3, H4, H5, H6, H8. Torx: T10, T25, T30. Philips Bits: PH1, PH2, PH3.Slot Bits: 4mm and 50mm extension bar for reaching concealed bolts. Bespoke protective molded case to keep the adjustable torque wrench and tool bits stored safely, also includes ‘storage’ section inside case to store bolts when using the wrench. Reversible 72-tooth ratchet head measures torque in clockwise and counter clockwise directions. Engage and release bit installment button.
  • 【PROFFESIONAL QUALITY AND WARRANTY】 - Our bicycle torque wrench sets are fully calibrated and tested for accuracy and come with a calibration certification provided for each tool..
Check Stock

PowerTec 71481 T-Track Knob Kit w/ 7 Star Threaded 1/4-20 Knobs T-Bolts and Washers for Woodworking Jigs and Fixtures 10 Pack

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

Lot 4 Each 24 Aluminum T Track 3/4 by 3/8 Slot Accepts 1/4 Hex Bolts 1/4 and 5/16 T Bolts Countersunk Holes Every 6 112114

  • Lot of 4 each 3/4” wide x 3/8” high x 24” long T Track.
  • Thick .100” sidewalls minimize bowing and twisting.
  • Uses standard 1/4" hex heads, 1/4" T bolts and 5/16" T bolts.
  • Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included..
Check Stock

POWERTEC 71484 T-Track Knob Kit w/ 7 Star Threaded 1/4-20 Knobs Bolts and Washers for Woodworking Jigs and Fixtures – Set of 4 Black

  • INCLUDES: (4) 7 Star Knobs, (4) T-Bolts, (4) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal track, t-track and double cut that accepts standard 1/4 inch bolt heads – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies.
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

FEL-PRO ES 72173 Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock