absoluteBLACK Bash Guide Premium Chain Guide ISCG05 Mount, 26-34t (Oval); 28-36t (Round)
- Material: [backplate] 7075 aluminum, [cage and bashplate] GF+PA66 polymer composite, [bolts] titanium.
- Chainring Sizes: (oval) 26 - 34 t, (round) 28 - 36 t.
Top T Type Bolts Reviews
DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
- Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
- PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
- T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
- Bolts and washers are 5/16”-18 x 1-1/2-inch.
- Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
- EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
- Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
- BUILT TO LAST: T knobs package includes ....
DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
- Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
- PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
- T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
- Bolts and washers are 1/4”-20 x 1-1/2-inch.
- Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
- EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
- Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
- BUILT TO LAST: T knobs package includ....
Pit Posse Drive Spinning T-Handle Wrench – 3/8” Ball-Bearing Rotating 3/8 T-Handle Tool – Remove Or Install Your Bolts Faster – Motorcycle Tools
- ...E INNOVATIVE ROTATING T-HANDLE- Pit Posses innovative rotating 3/8” T-handle is a new twist on an all-time favorite. The spinner T-handle wrench has a ball bearing in the handle which allows the T-handle to spin freely in your hand without any friction, this allows for faster removal and installation for all your bolts. This tool is a must have and will cut down the time spent on bolts..
- ✅TEXTURED GRIP FOR SECURE GRIPPING- The T-Handle wrench has a textured aluminum handle on the shaft that allows for an easy and secure grip on the tool yet allows the t-handle to spin with virtually zero drag for extremely fast removal and installation of bolts and other fasteners. The grip is fixed onto the shaft and will enable you to apply pressure comfortably..
- ✅REMOVE OR INSTALL BOLTS FASTER- The collar has bearings and allows the t handle to spin and help you take your bike apart or put it back together faster. Once you have felt the spin, you will never be able to go back to your standard T-handles again. The t handle allows you to apply pressure to the fastener that you're taking in or out and then spin it very quickly in and out to get the job done fast..
- ✅THE PERFECT ADDITION TO YOUR TOOLBOX- Our spinning T-handle is the go-to tool for all motorcycle e....
SNUG Fasteners (SNG325) Ten (10) 3/8-16 x 1-1/4\ Long Carriage Bolts Set w/Nuts & Washers, Count
- A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
- As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
- Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
- Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 2-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
- Package includes ten each of bolts, hex nuts , Flat & Lock washers.
MakerBeam 25 Pieces T-Slot Nuts inc Screws (MakerBeam is 10x10mm in Diameter).
- 1 bag T-slot nuts contains 25 T-slot nuts for MakerBeam (10mmx10mm) , 25 bolts ISO7380, M3, 4mm, A2 and 25 bolts DIN7991, M3, 4mm, A2.
- All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times.
- T-slot nut is great to fasten brackets or corner cubes. Not compatible with MakerBeam XL (15x15mm in diameter). There are special T-slot nuts for MakerBeam XL (15x15mm) available..
(5 Sets) 3/8-16x3\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg
- A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
- As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
- Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
- Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 3" | Thread Type: 16 tpi Coarse Thread (Standard).
- Package includes ten each of bolts, hex nuts , Flat & Lock washers.
(5 Sets) 5/16-18x5\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg
- A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
- As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
- Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
- Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard).
- Package includes ten each of bolts, hex nuts , Flat & Lock washers.
(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg
- A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
- As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
- Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
- Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
- Package includes four each of bolts, hex nuts , Flat & Lock washers.
(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg
- A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
- As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
- Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
- Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
- Package includes ten each of bolts, hex nuts , Flat & Lock washers.
POWERTEC 71223 Multi T-Tracks | 36 Long - 3 High | Universal T Track Aluminum Extrusion For Woodworking
- Includes: (one) 36 inch multi-t-track for woodworking.
- Universal: these T-slot tracks are spaced 3/4 apart, 3/4 thick and work with the major accessory fasteners - 1/4'' T-bolts | 1/4'' Hex bolts | 5/16'' T-bolts.
- T-track customization: you can immediately use this multi-track with your flip stops, fence-brackets, hold downs, SUB fences and more (sold separately) or depending on your woodworking project, can be custom cut to suit your specific requirements.
- Premium quality: featuring a solid construction, these extruded aluminum multi-tracks were engineered for high quality strength and durability.
- Applications: once assembled, these aluminum extrusions can be used with table saws, band saws, routers and drill press tables Your choices are limitless..
10pcs Black 2020 Series Corner Bracket Plate 5 Hole L Shape Joint Plates for Slot 6mm 20S Aluminum Rail Accessories (10PCS T Shape Without Screws and Nuts)
- 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile..
- 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile. 【Material】L Shape Joint Plates:6063 aluminum.
- 【High Quality】T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized. Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless..
- 【Widely Used】Compatible with all 20 series fasteners and accessories.
- Suitable for 3D printer, CNC build, workbenches, lasers, brackets, furniture, fitness equipment, precision printers, automatic cutting machines, etc.
- Applied in science, electronics, labs, home technology projects, displays/exhibitions, robotics, etc..
- 【What You Get】10pcs L Shape Joint Plates.
- 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
The ROP Shop Spare Tire Wheel Mount Kit Heavy Duty Bracket/Carrier for 6 & 8 Lugs 27021
- Spare Tire Wheel Mount Kit, Heavy Duty Bracket / Carrier for 6 & 8 Lugs, 27021.
- Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
- Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.