Top Synchron Clock Motor Replacement Reviews

6 Sets High Torque Quartz Clock Movement Mechanism Kit Long Shaft Clock Movement Parts Mechanism with Different Clock Hands Quartz Clock Movement Mechanism for DIY Clock Repair Parts Replacement

  • Clock replacement repair kit: you will receive 6 pieces of high torque long shaft clock movements and 12 different pairs of hands, these replacement....
  • Size details: the total shaft length measures approx. 13 mm/ 0.51 inch, and the thread length measures approx. 5 mm/ 0.2 inch.
  • Clock hands and motor kit: the long shaft clock mechanism provides extremely high accuracy and reliability, and these clock hands and motor kits have....
  • Wide usage: these long shaft clock movement repair and replacement parts are suitable for making and repairing DIY quartz wall clocks, and they are....
  • 6 Different styles of hands: this clock mechanism replacement set comes with 6 pairs of clock hands in different styles and length, each style has a....
Check Stock

Katfort Clock Hands and Motor Kit, 3 Pieces Clock Mechanism Replacement, DIY Quartz Clock Mechanism Kit with 7 Pairs of Hands(20mm/0.79inch)

  • Size: The total shaft length is about 20mm/0.79" and the thread length is about 13mm/0.51". Clock movement repair kit is suitable for clock dials with a thickness of 9 - 13mm / 0.35 - 0.5"..
  • Accurate Time and Quiet Motor: Clock parts kit provides extreme accuracy and reliability. It is equipped with 6168s silent sweep second movement, no ticks, which will provide you with a quiet environment..
  • 7 Different Styles of Hands: This clock replacement mechanism comes with 7 pairs of different pointer and length. It's perfect for repairing clocks, clock replacement or making your own customized clock project..
  • Wide Application: These quartz replacement clock motor can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for craft clock, quartz wall clock and so on..
  • Note: When you install this clock diy kit, please keep the hour hand and minute hand parallel, and not tighten the brass hex nut too tight..
Check Stock

Chang Ta Time Clock Replacement Motor 208/277V Timer WG1573-5 WG1573-10D

  • Replacement Clock Motor Part for 220 Volt Timers.
  • New replacement timer motor for the Intermatic time-clock mechanism..
Check Stock

Houoto Timer WG1573-5 WG1573-10D for Intermatic Time Clock Replacement Motor 208/277V

  • - Time Clock Replacement Gear Motor 208/277V Timer WG1573-10D.
  • - Replacement Clock Motor Part for 220 Volt Timers.
Check Stock

QLOUNI Quartz Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement 2/5 Inch Maximum Dial Thickness 4/5 Inch Total Shaft Length

  • 【Clock Mechanism Replacement】Great for repair, replacement or make a clock, applicable to craft clock, frameless draw clock, 3D large wall clock..
  • 【Long Hands Size】Hour hand length is about 115 mm/4.5 inch.
  • Total minute hand length is about 145 mm/5.7 inch.
  • 【Total Shaft Length】20 mm/0.8 inch, Thread length: 14 mm/0.6 inch, for 10 mm/0.4 inch thickness clock panel..
  • 【DIY Repair Parts】The hand is made of aluminum, can be cut according to the size of the dial, replacement part can use to different wall clock....
  • 【Ultra-silent Movement】Clock motor sweep silent, no ticking noise, sweep silent with no noise..
Check Stock

SATINIOR Synchronous Motor 100-127 VAC 50/60 Hz 4W 2.5-3 RPM/MIN CCW/CW Direction with 7 mm Flexible Coupling Connector for Model or Guide Motor 6

  • Package: includes 6 packs synchronous motor in 2.5-3 rpm and 12 packs hexagon motor flexible coupling (24 pieces machine screws included) and 6 pieces....
  • Size: flexible coupling connector is 0.275 inch/ 7 mm in inner diameter and 0.708 inch/ 18 mm in height with M4 screw installation hole.
  • Detailed parameters of synchronous motor: the power of motor turntable is 4 watts, the AC voltage range is 100-127 V, frequency is 50/60 Hz, rotating....
  • Quality material: synchronous motor is made of quality metal material in silver, the car wheels tires shaft is made of brass, all are well wear....
  • Applications: synchron motor could use for cup turning, heater machine, Christmas tree, home appliance, microwave oven, massager, lighting, popcorn....
Check Stock

8 Pieces Long Shaft Clock Movement Mechanism Quartz Clock Movement with 8 Different Pairs of DIY Clock Hands Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 8 pieces of high torque long shaft clock movements with 16 different pairs of hands.
  • These replacement parts suit well to different styles of clock frame, which are nice for repairing, replacing or making a clock by yourself.
  • Size details: the total shaft length is approx. 13 mm/ 0.51 inches, and the thread length is approx. 5 mm/ 0.2 inches.
  • Jump second movement is suitable for 1 - 4 mm/ 0.04 - 0.17 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers high accuracy and dependability, and they are equipped with sweeping motion but without ticking, providing you with a quiet environment.
  • Wide application: these clock repair replacement parts fit well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and also suit to be applied as DIY quartz wall clock replacement movement parts.
  • 16 Different styles of hands: this clock mechanism replacement set comes with 16 pairs of clock hands in different styles and length for your options, making them nice for clock creations and repairs while providing a decorative effect.
Check Stock

Quartz DIY Wall Clock Movement Mechanism Battery Powered Repair Parts Replacement Kit Clock Mechanism 2/5 Inch Maximum Dial Thickness 4/5 Inch Total Shaft Length

  • 【Clock Mechanism Replacement】Great for repair, replacement or make a clock, applicable to craft clock, frameless draw clock, 3D large wall clock..
  • 【Long Hands Size】Hour hand length is about 115 mm/4.5 inch.
  • Total minute hand length is about 145 mm/5.7 inch.
  • 【Ultra-silent Movement】Clock motor sweep silent, no ticking noise, Sweep Silent with No Noise..
  • 【DIY Repair Parts】The hand is made of aluminum, can be cut according to the size of the dial, replacement part can use to different wall clock....
  • 【Total Shaft Length】20mm/0.8 Inch, Thread length: 14mm/0.6 Inch, for 10 mm/0.4 inch thickness clock panel..
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

Permanent Magnet Motors, 31ZY 12V 3500-8000RPM High Speed CW/CCW Permanent Magnet DC Motor for DIY Generator(12v 4000RPM)

  • 【CW / CCW】A Permanent Magnet Motors of CW(clockwise), CCW counterclockwise and CW/CCW(automatically reverse when there is a big resistance)..
  • 【SELF-PROTECTION DESIGN】This synchronous motor has self-protection function, motor coil will not burned if overload or blocked..
  • 【STABLE】 If this synchron motor works under rated frequency, speed will not affected by voltage, very stable..
  • 【WIDE APPLICATIONS】Permanent magnet generator mainly used for electric fan ventilation mechanism, heater, all kinds of display shelf, handicrafts, lamps, lighting, toys and other equipment, air conditioning motor and rotary motor of microwave, etc..
  • 【DETAILS】 Outer diameter: 31mm / 1.22in, Shaft length: 19mm / 0.75in, Shaft diameter: 3mm / 0.12in. Type(Optional): 6V 4000rpm,12V 4000rpm,12V 8000rpm, 24V 3500rpm, 24V 5000rpm, 24V 8000rpm..
Check Stock

Twidec/2Pcs Synchronous Motor AC100~127V 50/60HZ Turntable Synchron Motor 4W CW/CCW Electric Motor 2.5-3RPM/MIN TYC-50-2.502

  • Turntable Synchronous Motor Power: 4 watts.
  • Size: motor is 2 inch/ 4.9 cm in diameter, 1.5 inch/ 3.8 cm in height.
  • Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length.
  • Characteristics：The synchron motor has small power consumption and large torque which is convenient to use.
  • Applications: the synchronous motors are good tool for hand-made, school project.
  • Suitable for home appliance, heater machine, electric fan, Christmas....
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (20 mm, Gold)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (28 mm/ 1.1 Inches)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 28 mm/ 1.1 inches, and the thread length is approx. 20 mm/ 0.79 inches.
  • Jump second movement is suitable for 13-18 mm/ 0.51- 0.71 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock