Top Switch Gear Motor Reviews

Mophorn Binnacle Remote Control Box Boat Throttle Control 704-48205-P1-00 Outboard Remote Control Box Fit for Yamaha Console 704 Single

... The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
Durable Trim Harness: The control cable features high-temperature resistance and remarkable color coding. The harness contains trim & tilt switch connection cable and key switch panel connector. Serviceable cord facilitates remote power use..
Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch "up," the outboard motor tilts and goes up.
Press the switch "down," and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
Reasonable Designs: The outboard remote control's structure is very stable and practical. There is durable grip control, a lever-free accelerator button, a control lever for smooth reverse and forward, and various accessories are also provided to complete the work efficiently..
Wide Compatibility: The remote boat throttle control is compatible with the Yamaha outboard, designed for both shift and throttle, which can be actuated by operating a remote control lever. It i....

Check Stock

Mophorn Boat Throttle Control 5006186 Side Mount Outboard Remote Control Single Lever Binnacle with Key Switch and Lanyard fits for Evinrude and Johnson Outboards Throttle Gear Control

...o run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
Durable Trim Harness: The control cable features high-temperature resistance, thermoplastic insulation, and remarkable color coding. The harness contains a trim/tilt switch connector and key & neutral protection switch. A serviceable cord facilitates remote power use..
Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch “up,” the outboard motor tilts and goes up.
Press the switch “down,” and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
Reasonable Designs: The outboard remote control’s structure is very stable and practical. There is a control lever, durable grip, friction adjustment knob, trim and tilt switch, a control lever for smooth reverse and forward, and various accessories to complete the work efficiently..
Wide Compatibility: The remote boat throttle control is compatible with the Evinrude & Johnson outboard, designed for both shift and throttle, which can be actuated by operating ....

Check Stock

Kobalt 5-in 24-Volt Max-Volt Cordless Angle Grinder

Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
Lock on/off feature for continuous operation.
AC/DC switch for use with alternative power source.
Protective zig zig varnish seals the armature from dust and debris for longer tool life.
Extra large paddle switch for comfortable operation.
Thicker coil wires are wound more closely to reduce heat and energy loss.
All ball bearing design and metal gear housing for durability.
(1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
(5) 4 1/2 inches 24 Grit Grinding Wheels.

Check Stock

Makita 9557PBX1 4-1/2\ Paddle Switch Cut-Off/Angle Grinder

Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
Lock on/off feature for continuous operation.
AC/DC switch for use with alternative power source.
Protective zig zig varnish seals the armature from dust and debris for longer tool life.
Extra large paddle switch for comfortable operation.
Thicker coil wires are wound more closely to reduce heat and energy loss.
All ball bearing design and metal gear housing for durability.
(1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
(5) 4 1/2 inches 24 Grit Grinding Wheels.

Check Stock

Makita GA9060RX3 7\ Concrete Surface Planer with Dust Extraction Shroud

Dust extraction shroud is designed to capture dust during concrete surfacing applications.
Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance.
Soft Start suppresses start-up reaction for smooth start-ups and longer gear life.
Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption.
Power light indicates switch failure, cord damage or worn-out motor brushes.

Check Stock

3000W Electric Concrete Saw, 14 in Blade Concrete Cutting Machine Circular Saws 3800R/Min with Water Pipe/Pump Wrench Saw Blade for Concrete Granite Tile Masonry Saws

...f this concrete cutting machine is made of aluminum, the saw blade is made of diamond, the motor material is iron + copper, and the gear is steel. It is strong and durable. It is very suitable for cutting granite, brick, porcelain, reinforced concrete, Metal, cement, steel, wood, etc..
MULTIPLE ADVANTAGES - lock the switch, no need to press the switch all the time, labor saving and convenient.
external carbon brush design, convenient disassembly and assembly, effectively prolonging the service life of the motor.
aluminum alloy gear box, light weight, no deformation, more stable power transmission ..
REASONABLE DESIGN - water pipes supply water to the blades to reduce dust. During your operation, the safety cover will block flying objects. Double protection switch prevents accidental opening of the machine. The rotating rear handle and the positioned front handle facilitate accurate cutting in horizontal and vertical modes..
ADJUSTABLE CUTTING DEPTH - This concrete saw uses a 14-inch diamond cutting blade. The cutting depth can be deep or shallow (cutting depth: 2-5.1 inches), and it is strong enough to cut most materials. Perfectly meet your needs for various cutting depths..
SPECIFICATION - Product Size:25.59 x 15.35 in Saw Blade Diameter: 13.78 in Prod....

Check Stock

Makita 9566PC 6\ SJS™ High-Power Paddle Switch Cut-Off/Angle Grinder

SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
Constant speed control automatically applies additional power to the motor to maintain speed under load.
Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
Makita 9566PC 6" SJS High-Power Paddle Switch Cut-Off/Angle Grinder.

Check Stock

Haokry Hair Clippers for Men Professional - Cordless&Corded Barber Clippers for Hair Cutting & Grooming, Rechargeable Beard Trimmer

...dicators become normally on, the power is full. At this time, the charging wire can be pulled out..
【3 Gear Strength Adjustable】Gently press the side power button to start the machine.The indicator above the short symbol of the gear indicator lights up,Press the button switch once again to switch to the second gear,The indicator above the medium length symbol lights up,Press the power button once again to switch to the third gear,The indicator above the longest symbol lights up,Press the power button again to return to the slow gear..
【13 pcs Mens Hair Clippers Grooming Kit】 This is a complete barber sets for cutting hair, which includes a electric hair clipper,cape, lubricating oil, cleaning brush,comb,scissors,USB charge line and a full-range of guard attachments (3/6/10/13/16/19mm) for different hair lengths (0.5-2mm)..
【All In One Professional Clippers】 This multipurpose hair clipper combines the functions of a hair clipper and a beard trimmer in one device. It includes full-size guide combs to satisfy your needs of trimming your head and face, it is also suitable for kids or toddlers haircut thanks to low n....

Check Stock

Dog Clippers for Grooming, Low Noise Rechargeable Dog Grooming Kits Cordless Pet Grooming Tool Professional Dog Hair Trimmer for Thick Heavy Coats Pet Clippers Electric Dog & Cat Grooming Kit

【3 Gear Strength Adjustable】First Gear:5000rpm,Second Gear:6000rpm,Third Gear:7000rpm,Gently press the side power button to start the machine.The indicator above the short symbol of the gear indicator lights up,Press the button switch once again to switch to the second gear,The indicator above the medium length symbol lights up,Press the power button once again to switch to the third gear,The indicator above the longest symbol lights up,Press the power button again to return to the slow gear..
【CORDLESS&CORDED】Dog Grooming clippers can be with cord or cordless which is super convenient for self-cutting. Universal charging - One full charge Last up to 200 minutes of use.When the power of the hair clipper is used up，This Dog hair trimmer supports plug and play.When charging, the five indicators light up in the form of running lights from bottom to top. When the five indicators become normally on, the power is full. At this time, the charging wire can be pulled out..
Self-Sharpening Precision & Safe Blade:This dog clippers self-sharpening stainless-steel blades remain sharp for smooth grooming that creates a snag-free cutting and pleasant experience for your pet. R-shaped clog-proof blades will make your pets safer. Pro quality at home means few....

Check Stock

Makita 9557PB 4-1/2\ Paddle Switch Angle Grinder, with AC/DC Switch

Powerful 7.5 AMP motor delivers 11,000 RPM for high output power.
Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort.
Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life.
Lock-on/off feature for continuous operation.
AC/DC switch for use with alternative power source.
4-1/2-inch angle grinder with paddle switch seals motor and bearings from contamination.
7.5 amp motor delivers a no-load speed of 10,000 RPM.
Small circumference barrel grip for improved handling.
Includes grinding wheel, wrench, side handle, flange and wheel guard.

Check Stock

Metabo HPT Angle Grinder | 4-1/2-Inch | Includes 5 Grinding Wheels & Hard Case | 6.2-Amp Motor | Compact & Lightweight | G12SR4

INCLUDES: 4 1/2" Angle grinder, five grinding wheels and a carrying case.
MOTOR: 6.2 Amp motor with 980W of max output power for tough grinding jobs.
SPINDLE LOCK: Spindle lock for quick and easy disc and accessory changes.
SWITCH: Left-mounted slide switch with quick-off feature for added safety.
SIDE HANDLE: Removable, forward-canted side handle for improved control and comfort for right and left-handed users.
LIGHTWEIGHT: At only 4.0 lbs, experience greater control and maneuverability with less fatigue.
GRIP: Smaller grip is designed to reduce fatigue New labyrinth design for better dust and debris durability.
WARRANTY: 1-Year base warranty gives you peace of mind.
GEAR CASE: Low-profile gear case to get into the tightest areas.

Check Stock

Makita 9564P 4-1/2\ SJS™ Paddle Switch Angle Grinder

Powerful 10.0 AMP motor delivers more output and 11,900 RPM for the most demanding applications.
SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
Larger cooling fan and blades pull more air through the motor to help maintain lower operating temperature.
Paddle switch with no lock-on for operator comfort.
Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.

Check Stock

KFI A2500-R2 ATV Series Winch

Water Resistant seals to keep the elements out.
Includes a Mini-Rocker Handlebar Switch Control.
1.1 HP motor with 171:1 Gear Ratio All Metal Planetary Gear Drive.
45.9' Aircraft-grade Wire, 3/16" diameter.

Check Stock