Top Sw Type Wire Braid Reviews

MyCableMart 6inch USB 2.0 Certified 480Mbps Type A Male to Mini 4-Pin Male Cable

• Used by many cameras, GPS systems, and other small devices.
• Cable Conductors Gauge: 28AWG (1P) + 24AWG*2C (HEAVY DUTY).
• Shielding and Jacket Type: TC / braid 32*0.1mm.
• Outer Cable Diameter: 3.5mm, RoHS Compliant.

3D Printer T-K500 m3 x 15mm K Type Thermocouple Sensor K-Type Compatible with Volcano V6 HOTEND Block 500℃ PEI PEEK High Temperature 3D Printing

• This Thermocouple sensor is 3mm x 15mm cylindrical package with 1 meter long cable compatibility with all ID 3mm cartridge-style heater blocks..
• Thermocouple Wire with 304SS Braid Over Glass Insulation,Durable, Flexible and Long Lasting.
• Thermocouple sensor for high temperature printing up to 500C and 450 degree long hours guaranteed.
• Package: 1piece K type thermocouple (Positive wire: Yellow.
• Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, if you need an amplifier module, please search the ASIN ID " B08C4Z9PZS ".

MyCableMart 6inch USB 2.0 Certified 480Mbps Type A Male to Mini-B/5-Pin Cable

• Used by many cameras, GPS systems, USB Hubs, MP3 players, and some legacy phones.
• Cable Conductors Gauge: 28AWG (1P) + 24AWG*2C (HEAVY DUTY).
• Shielding and Jacket Type: TC / braid 32*0.1mm.
• Outer Cable Diameter: 3.5mm, RoHS Compliant.

Electrics Wiring Harness Kit Replaces for ATV QUAD 150/200/250/300CC Kawasaki Stator

• This harness is a 3 wire MAF and a 1 wire alternator. For drive by cable throttle body Only..
• Compatible with LS1 4L60E 2003-2007 Chevrolet, GMC, Cadillac and Hummer engine.
• suitable for 03-07 all using 4L60E(Vortec engine 4.8 5.3 6.0) gearbox automotive..
• All wiring harnesses come with the required instrument panel connections, including speedometer, tachometer, neutral, TCC, fault indicator and DLC port. Red/blue PCM connector and EV1 fuel injector connector..
• The 1200-degree glass fiber braid and connector position lock on all circuits are heated before leaving the factory to improve the performance and efficiency of the engine..
• The length of the 60-AMP relay harness has been increased by 36 inches, which is convenient for computer installation and easy installation, and there is a complete installation manual..

Conido Charging Stand for Apple Watch, Watch Charger Stand with Charging Cable, Magnetic Wireless Charging Station Compatible with Apple Watch SE Series 7/6/5/4/3/2/1/44mm/42mm/40mm/38mm- Black

• 【Wide Compatibility】Compatible with Model SW021 SW023 SW025 ID205L ID205G ID205U ID205S ID206 ID216 Uwatch 2/2S/3/3S/Urun/Urun s/Ufit Gst Smartwatch for any brand, compatible with YAMAY, Willful,Letsfit, LETSCOM, Lintelek, Blackview, Umidigi, Fitpolo...(NOTE: Please check the model of watch is proper before you purchase an order).
• 【Magnetic Charging】Built-in pure copper probe, this USB charging cable comes with solid magnetic power. It can fast automatically adsorb the watch to charge. Upgraded magnet enhances the charger's efficiency and speed. The magnetic design also won't damage your smartwatch..
• 【Fast and Safe】With rapid and steady conduction design, the smartwatch charger will charge your watch fully about 2 hours. The charger is equipped with overvoltage and overcurrent protection. The sports watch can charge safely and won't happen any safety issues..
• 【Durable & Premium Quality】Made of high quality wire.
• ensure the excellent charging experience for your Device. Durable High-quality ABS + PVC Material and Copper Wire ensures Stable Current Transmission, which assures the quality of the charge.
• 【Compact & Portable】You can carry this compact portable charger out easier rather than taking long and oversized charger dock.

Klipsch 1065957 Reference Series R-100SW 10 inch 300W Subwoofer Bundle with Deco Gear 100ft Long 16 AWG Speaker Wire

• Klipsch Reference Series R-100SW 10" 300W Subwoofer.
• BUNDLE INCLUDES: Klipsch Reference Series R-100SW 10" 300W Subwoofer - Deco Gear 100ft long 16 AWG Speaker Wire.

GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,59'Length x 0.12\Width

• Brand History -- Founding in 1965, GOOT had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products..
• High Efficiency -- High performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments (RMA corresponds to the use of standard flux). Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load..
• Good Quality -- Solder wire with flat needle type preparation, soft design, fast heat transfer, suitable for fast absorption. It not only help you improve efficiency and quality, also more environmentally friendly..
• Safety and Variety -- Use at ease. No fluorine, low residue, suitable for a variety of PCB circuit boards. Size - W 0.12" L 59".
• 100% Satisfaction Guarantee -- You can return the undamaged product and packaging without any reason within 30 days. Any problems can be contacted by email..

NOYITO Motherboard Extension Wire Set 22AWG Silver Plated Wire Gold-Plated Plug Power SW, Power LED, HDD LED, Reset SW Four Kinds Extension Wire for PC DIY (0.4m, Red)

• Motherboard extension kit includes four interface extensions: POWER SW±, RESET SW±, HDD LED±, and POWER LED±..
• Silver plated wire. It has the advantages of high temperature resistance, good flame resistance, excellent electrical properties, and perfect mechanical and chemical properties..
• Gold plated plugs. Excellent oxidation resistance and conductivity..
• We make high quality, high security wire. Reject inferior products. If you have any need for help in use, you can contact us..
• This series of products has a variety of color and size suits. Please select your desired product specification before purchasing..

Frwanf Braided Fishing Line 4 Strands Super Strong PE Fishing String ExtremePower Fishing Braid Line for Saltwater and Fresh Water 15LB Test 100M/109Yards Blue

• PE BRAIDED FISHING LINE: small diameter by improved weaving process and high-strength PE fiber threads imported from Japan, this fishing wire is durable, abrasion resistent and easy to tie a sold knot..
• SUPER WEAR-RESISTANT: with improved coating technology the braid line is non water absortion, less color fade, fast cutting water, casting farther and lasts longer..
• ULTRA HIGH SENSITIVITY: Thanks to its zero stretch,superior hook setting that increases your catch ratio.The braid string transmits information from your lure better than any other type of fishing line,it passes the message to you before you see it..
• LOW MEMORY: this braided fishing string has almost no spool memory space and does not untwist like mono, which makes it fantastic for spinning reels.lower the chance of the wind knots,allowing you farther casts..
• PERFECT APPLICATABLE: specialised for saltwater & freshwater. Perfect suitable for trolling, lure fishing, boat fishing, deep sea fishing, and ice fishing etc..

Leviton 1865 3 Amp, 125 Volt, Single-Pole, Doorjamb with Jamb Box Switch, Single Circuit Momentary, Normally ON, Commercial Grade, Brass

HiLetgo 100pcs SW520D Vibration Sensor Metal Ball Tilt Shaking Switch 5.211.5 SW-520D Tilt Shaking Position Switches

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

• ...Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
• Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
• 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
• ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
• 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small ....

Tides Fishing Pliers with Leather Sheath Saltwater/Freshwater-Quality Offshore/Inshore Anti-Corrosive Fish Pliers with Tungsten Steel Braid and Wire Cutters. No Hassle 1-Year Warranty. (Silver)

• Integrated Tungsten Carbide Wire, Mono & Braid Cutters.