Top Suspension Lift Reviews

Supreme Suspensions - 3.5" Front + 3" Rear Lift Kit for 2007-2019 Chevy Silverado/GMC Sierra 1500 2WD/4WD - Full Suspension Lift Kit with Rear Shock Mount Extenders (Black)

...(6-LUG - 2WD 4WD). *Does NOT fit 2007 Classic / TrailBoss / AT4 Models, 2015+ vehicles equipped with factory stamped steel UCA, or 2019 models with 5/8 Rear Center Pin. This kit is NOT compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System..
NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks..
TECHNICAL NOTES: 3.5 inch front and 3 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. IMPORTANT NOTE: Installation of Aftermarket Uniball UCA is highly recommended after lifting the front end by 2.5", or more. The upper ball joint will wear out rapidly with use of stock UCA..
HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy....

Check Stock

Madjax Lo-Pro 2004-Up Lift Complete Kit for Club Car Precedent Golf Carts

6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 12" Black 'DARKSIDE' wheels with mounted All-Terrain tires, center caps, and lug nuts..
Fits: Club Car Precedent electric and gas models (2004+).
Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 12"x7" Black 'DARKSIDE' Aluminum Alloy Wheels that come mounted with 23"x10.5"-12" All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.

Check Stock

NEXUS SUSPENSION 4" Lift Coil Spring&Shock Absorber Lift Kits For Jeep Grand Cherokee ZJ 1993-1998,4" Suspension Lift Kits for Jeep Grand Cherokee ZJ

NEXUS SUSPENSION 4" Lift Coil Spring&Shock Absorber Lift Kits For Jeep Grand Cherokee ZJ 1993-1998,4" Suspension Lift Kits for Jeep Grand Cherokee ZJ.
4" Lift Front Shocks for Jeep Grand Cherokee ZJ 1993-1998,Collapsed Length: 15.59" (396.00mm),Extended Length: 26.18" (665.00mm)..
4" Lift Rear Shock Absorber for Jeep Grand Cherokee ZJ 1993-1998,Collapsed Length: 15.59" (396.00mm),Extended Length: 26.18" (665.00mm)..
Zinc Plated Smooth Body Finish,In Order to Maintain the GLADIATOR JT Shock Absorbers' Luster,Wax or Lubrication ,Oil Service to Prevent Tarnishing..
Nitrogen Gas Pressure Twin Tube Shocks design ensure enhanced durability, Designed Specifically for Lifted Jeep Ford Dodge Chevy GMC Toyota etc..

Check Stock

Liftcraft - Fits 2006-2020 Dodge Ram 1500 Lift Leveling 3.5 Inch Front Kit 4WD 4x4

FITMENT: For 2006 - 2020 Dodge Ram 1500 4WD Models | NOTE: Will not Fit TRX, Mega Cab, Ram Rebel or Warlock Models | Will Not Fit trucks equipped with Four-Corner Air Suspension.
MATERIAL: Premium 6061T6 aircraft aluminum spacers with ideal strength and weight.
INSTALLATION: Bolt-on kit, only takes a couple of hours to install.
CONTENTS: Aluminum Strut spacers (2), Hardware and Detailed Instructions - Liftcraft suspension lift and leveling kits are designed to offer a safe and easy way to improve the look of your truck and run larger-diameter wheels and tires without compromising your vehicle's ride quality..

Check Stock

maXpeedingrods 2.5" Lift Kit for Jeep Grand Cherokee WK2 2011-2022, for Dodge Durango 2011-2022 Front Rear Suspension Lift Kit

[Application] Lift kit fits for Dodge Durango 2011-2022 2WD/4WD, for Jeep Grand Cherokee WK2 2011-2022 2WD/4WD. Does not fit models with Air-Ride Suspension.
[Durable Material] Suspension lift kit is made of high-strength steel with good finish to resist rust and corrosion for an extended lifespan.
[Front & Rear Lift] 2.5” lift kit gives your vehicle higher ground clearance to fit larger tires and rims and accommodates tires up to 33".
[Trustworthy Replacement] Installation will take approximately 1-2 hours. No cutting, welding or other parts are required. No need to trim factory studs.
[Premium Service] We are committed to providing every customer with high-quality products. If you require any further information, feel free to contact us anytime.

Check Stock

10L0L Golf Cart 6 inch Heavy Duty A Arm Lift Kit for Club Car Precedent 2004-up Electric or Gas

6" A-Arm spindle lift kit for Club Car Precedent 2004-up gas and electric, allows for up to a 23" tall tire.
Increase suspension travel providing a smoother off-road experience.
Includes front and rear lift, no cutting and no weld design, includes hardware and instructions.
Recommend professional installation, takes an estimated 1-3 hours to install.
Kit includes: 1 x main suspension assembly, 2 x spindles, 2 x a-arms, 2 x rear lift blocks, 2 x rear shock mounting plates, 2 x rear spring u-bolts.

Check Stock

Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5' High-Strength Steel Spring Spacers Lift Kit (Tig Welded) 2WD 4x2 Pro

COMPATIBLE WITH 1994 – 2018 Dodge Ram 1500. *Will only work on 2WD Models with Independent Front Suspension (IFS). Not recommended for Ram 1500 REBEL, TRX, Mega Cab or Extended Cab models. Will NOT Fit models equipped with AirRide Suspension System..
CONTENTS: (2x) High-Strength Steel Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack..
TECHNICAL NOTES: 2.5 inch front suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved..
INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools*. *Please note: Compressing your springs can be VERY dangerous. We recommend the use of a Spring Compressor Tool to ensure a safe disassembly of your springs and prevent the spring from causing injury or damage to your vehicle. An alignment is always recommended if you are altering the height of your vehicle..
BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires..

Check Stock

Liftcraft - Fits 2006-2020 Dodge Ram 1500 Lift Leveling 3.5 Inch Front Kit | 6061T6 Aircraft Billet Strut Spacers (4WD)

FITMENT: For 2006 - 2020 Dodge Ram 1500 4WD Models | NOTE: Will not Fit TRX, Mega Cab, Ram Rebel or Warlock Models | Will Not Fit trucks equipped with Four-Corner Air Suspension.
MATERIAL: Premium 6061T6 aircraft aluminum spacers with ideal strength and weight.
INSTALLATION: Bolt-on kit, only takes a couple of hours to install.
CONTENTS: Aluminum Strut spacers (2), Hardware and Detailed Instructions - Liftcraft suspension lift and leveling kits are designed to offer a safe and easy way to improve the look of your truck and run larger-diameter wheels and tires without compromising your vehicle's ride quality..

Check Stock

ReadyLIFT 2007-2019 Compatible With Toyota TUNDRA 4.0'''Front with 2.0''Rear SST Lift Kit 69-5475

"unmatched curb-appeal delivered in an affordable yet innovative smart suspension technology "no-cut" lift kit".
maintains the factory ride, handling and suspension geometry.
the perfect mild lift solution for 2019 chevy silverado/gmc sierra 1500 trucks that provides a great looking aggressive stance with a slight rake.
"allows for up to a 35x11. 50" (295/65-20) tire on up to 9" wide wheel with 0 offset.".

Check Stock

RockTrix Front Leveling Kit - 2.5 inch Lift - Compatible with 2002-2014 Dodge Ram 1500 (2WD Only, Excludes Megacab) - Black Steel Coil Spring Spacers

[APPLICATIONS] ONLY fits two-wheel drive. Compatible with 2002-2014 Dodge Ram 1500 (2WD ONLY, Excludes Megacab)..
This leveling unit does not come with installation instructions but is completely bolt-on.
please consult a professional if you need support. Should take 2-4 hours to install and does not require any additional shock absorbers, cutting, welding, or other forms of modification..
Made from Heat Treated Carbon Steel, machined to exact specifications for optimal durability and fitment. Designed to be solid so that it does not bend or warp under stress and should last the lifetime of your vehicle..
Includes 2 lift spacers for a total lift height of 2.5″ (2.5 inch). Note that your suspension geometry is not a 1:1 ratio meaning the actual item thickness is not equal to the lift height..
After installation suspension will be slightly stiffer. In addition, an alignment after installation is necessary to get the correct lift..

Check Stock

TORCH 3 Front 3 Rear Lift Kit For 1992-1999 Chevy Tahoe Suburban GMC Yukon 1500 4X4 4WD

FITS: 1992-1999 Chevy Suburban 1500, GMC Yukon 1500, and 1995-1999 Chevy Tahoe 1500 4X4 4WD (Torsion Bar Suspension ONLY).
CONTENTS: Front Adjustable Lift Torsion Keys, Rear Tapered Lift Blocks, Extended U-Bolts and Hardware.
INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
Note: Torsion Bar Suspension Models Only..

Check Stock

WULF 4' Front 2' Rear Leveling Lift Kit with Shackles compatible with 1998-2000 Ford Ranger 2WD with Coil Spring Suspension

Compatible with 1998-2000 Ford Ranger 2WD with Coil Spring Suspension.
FRONT: WULF 4" Lift Ductile Cast Iron Spindles / Knuckles.
REAR: 1.5-2" Adjustable Lift Black Powder Coated Shackles, Zerk-Grease Fittings, Pressed greaseable high grade poly bushings and metal sleeves included.
NOTE: 2WD models only. Excludes models with Stabilitrak. Requires Coil Spring suspension Please see the description for full details, or contact us for assistance.
Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.

Check Stock

WULF 4' Front 2' Rear Leveling Lift Kit with Spindles & Shackles compatible with 2001-2011 Ford Ranger 2WD with Coil Spring Suspension

Compatible with 2001-2011 Ford Ranger 2WD with Coil Spring Suspension.
FRONT: WULF 4" Lift Ductile Cast Iron Spindles / Knuckles.
REAR: 1.5-2" Adjustable Lift Black Powder Coated Shackles, Zerk-Grease Fittings, Pressed greaseable high grade poly bushings and metal sleeves included.
NOTE: 2WD models only. Excludes models with Stabilitrak. Requires Coil Spring suspension Please see the description for full details, or contact us for assistance.
Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.

Check Stock