Top Surface mount Signal Isolators Reviews

Viair 45040 450C Air Compressor Kit

• 12 VOLT - 150PSI Max Working Pressure, engine must be running during use..
• 1.66 CFM Free Flow at 0 PSI, 100% Duty Cycle at 100PSI & 72 degree ambient temperature.
• CFM at 0 PSI - 1.66 / CFM at 100 PSI - 0.94.
• Kit includes 450C compressor, mounting hardware with vibration isolators, freeze-resistant wiring, remote mount air filter assembly, air line for....

Viair 45058 IG Series Compressor Kit

• Included Parts: Installation instructions.

Viair 45041 450H Hard-Mount Automatic Compressor Kit 12V 100% Duty Sealed

Viair 35030 350C Air Compressor Kit

• 12 VOLT - 150PSI Max Working Pressure, engine must be running during use..
• Hardmount unit with mounting feet and four screw positions, includes vibration isolators and hardware..
• 100 percent duty cycle at 100 PSI and 72 degrees F ambient Temp..
• Can be used to inflate helper bags for load leveling, inflate four tires up to 32 inches in diameter or use with heavy duty air horns..

TMH ( Pack of 2 6 Inch 10 LED Surface Mount Oval Clear Lens/Amber Light Turn Signal Side Marker Tail LED Light for Truck Trailer Trail Bus 12V DC

• Package includes 2pcs 7.5" amber Surface Mount Oval Led truck trailer turn signal Lights w 2Pcs Oval Oval Chrome Bezels/Covers. Screws are included for Horizontal and vertical mounting.
• These 6 inch oval led trailer lights Outside surface mount measures 7 1/2" L x 3 1/4" W.
• Actual light measures 6 3/8" L x 2 1/8" W.
• 4 Screw holes for mounting: Vertical Mount hole size: 2-2/3" and horizontal hole size: 6.96" approx..
• Super Brightness: Each amber light has 21 PCS high-quality SMD LEDs to output super bright led light, high brightness for turn signal light, low brightness for parking light or running light, improving visibility and ensuring you a safer night.
• Widely Used: This trailer light work on 12V DC system and is suitable for almost all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just check the size to make sure fit before your purchase.
• NOTE: These amber led lights are IP65 Waterproof, please do not sue it under water, thanks.
• Warranty: We truly offer 1 year warranty for these oval truck trailer front turn signal lights! If have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours.

NATIKA Backup/Front/Side View Camera No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount CVBS | AHD Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans

• ...6pcs FULL glasses large-aperture optical system,the picture with very low distortion rate,you will get crystal realistic view when you backing up. Also it with a horizontal 135 degree wide view angle lens,it's great for you to check the invisible blind spot clearly and make parking safe and simple..
• Rear view camera surface mount support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so the waterproof effect is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO..
• Reverse camera flush mount support both CVBS and AHD video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night, rainy day or in dark garage..
• Car backup camera's housing is metal,2 in 1 installation option design(surface or flush mount option).Also it is built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD format(....

Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)

• 8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base..
• left hand driver's side: 27 Diodes( 22 Red++5 White ).
• this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments..
• It is designed to mount on the surface of a trailer and Camper etc..
• there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved..
• Dimension: overall length: 8 5/8", The height: 3 7/8" and the total depth is 1 3/5".
• Mounting Holes are Approx. 7" by 2 1/2" Apart..

Partsam 18 LED Trailer Bus Mid Turn Signal Marker Light (amber) Side Mount P/T/C Light Clearance with Reflector Replacement for Freightliner Sleepers Side Marker/Turn Signals, 3 wires

• Package includes 1 Piece BRIGHT Amber 18 LED Surface Mount Mid Turn Signal and Marker Light, Hardwired with 3 wires, Mounting Screws are included.
• This Amber Led Side Turn Signal and Marker Light measures 5.85" Long by 2.32" Wide and 2.43" High, Mounting Centers 4.76".
• 18 Amber LED Side Mount P/T/C Light with Reflector.
• This Side Turn Lamp is HARDWIRED with 3 wires: White is ground, Black is low mode for marker light, clearance light or running light, and red is high mode for side turn signal light or auxiliary turn signal light.
• Used on travel trailer, vintage trailer, utility trailer, boat trailer, horse trailer, camper trailer, cargo trailer, motorhome, RV, camper, flat boat, golf cart etc..
• Warranty: We truly offer 1 year warranty! If have any questions or issues about our led mid turn lights, Please feel free to us and we will reply in 24 hours.

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

• ...up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
• ✅MATERIAL: Accessory Wires is 100% Copper Wires.
• License Plate Bracket made from Polypropylene Plastic.
• Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
• and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
• ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standards.
• ✅BRIGHTNESS: We improved these trailer lights, compared with the old vision, these trailer lights are brighter. Brighter lights are safer in any environment such as Sand, Water, Dirty, Snow and Dusty Place..

EAG Rear Bumper Rock Crawler with Parking Sensor Bracket and D-Ring Fit for 18-22 Wrangler JL

• BACKUP SENSOR MOUNTING - If your Wrangler JL came with factory backup sensors, then they will fit directly into the offroad rear bumper’s sensor mounts. If not, then we provide fill plugs for the bumper..
• OFF ROAD COMPONENTS - Shackle mounts are welded onto the bumper from the inside and outside for maximum strength. Two 4.75 ton D-ring shackles and black isolators are included. 2" receiver hitch rated 5,000 lbs equipped with safety chain loops..
• HIGH-QUALITY MATERIAL - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability..

Partsam 2Pcs 6-1/2\ Oval Amber Led Trailer Lights 21 LED Flange Mount w Reflectors Turn Signal Park Side Marker LED Light for Truck Trailer Trail Bus 12V LED Trailer Parking Light w Chrome Bezels

• Package includes 2pcs 7.5" amber Surface Mount Oval Led truck trailer turn signal Lights w 2Pcs Oval Oval Chrome Bezels/Covers. Screws are included for Horizontal and vertical mounting.
• These 6 inch oval led trailer lights Outside surface mount measures 7 1/2" L x 3 1/4" W.
• Actual light measures 6 3/8" L x 2 1/8" W.
• 4 Screw holes for mounting: Vertical Mount hole size: 2-2/3" and horizontal hole size: 6.96" approx..
• Super Brightness: Each amber light has 21 PCS high-quality SMD LEDs to output super bright led light, high brightness for turn signal light, low brightness for parking light or running light, improving visibility and ensuring you a safer night.
• Widely Used: This trailer light work on 12V DC system and is suitable for almost all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just check the size to make sure fit before your purchase.
• NOTE: These amber led lights are IP65 Waterproof, please do not sue it under water, thanks.
• Warranty: We truly offer 1 year warranty for these oval truck trailer front turn signal lights! If have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours.

EAG Steel Rear Bumper with Tire Carrier Fit for 1984-2001 Cherokee XJ

• FITMENT - Compatible with 1984-2001 Cherokee XJ.
• TIRE CARRIER WITH EZ Grip LATCH HANDLE- Two-way adjustable tire mount for up to 37" tire for tire carrier. The EAG patent-pending EZ Grip latch handle is designed for easy opening/closing and rattle-free operation..
• RUGGED CONSTRUCTION - Manufactured from durable 5/32" steel sheet. High quality textured powder coat for corrosion protection and durability..
• OFF-ROAD COMPONENTS - 2" Class Ⅲ receiver hitch rated 5,000 lbs equipped with safety chain loops. Shackle mounts are welded onto the bumper from the inside and outside for maximum strength. Two 4.75 ton D-ring shackles and black isolators are included..

GL.iNet WiFi Router Holder Wall Mount with Screws, Compatible with Convexa GL-B1300 and GL-S1300 Home Wireless Gateway, Networking Device Bracket, Easy to Install (White)

• 【DESIGNED TO PERFECTLY FIT YOUR GL.INET ROUTER】This wall mount is specially compatible with Convexa GL-B1300 and GL-S1300 Home Wireless Gateway. (Router is not included.).
• 【ACQUIRE BETTER WIFI SIGNAL】Mount your router on a wall to acquire a better wifi signal, keeps your GL.iNet wireless gateway out of the way of pets and children..
• 【QUICK & EASY INSTALLATION】Come with screws and plastic wall plugs. You can easily mount you GL.iNet router securely on any vertical surface, such as wall, cabinet or anywhere you like..
• 【PROTECT YOUR ROUTER FROM DEMAGE】Mount your router on a wall, shelf or most vertical surface and ensure it is always in the best location. Made of ABS thermoplastic polymer material, durable and solid for use. Acrylonitrile butadiene styrene protects your router from scratches and damage..
• 【WHAT YOU GET】1x Wall mount which is compatible with GL-S1300 or GL-B1300, 4x screws, 4x plastic wall plugs..