Top Surface Plate Lapping Reviews

Shapton Glass Stone Seven

  • Includes 3 Shapton Glass Stones in 500, 2000 and 30,000 grits (25, 6.7 and .44 micron).
  • Stone Holder, Diamond Lapping Plate and Storage Box.
  • Stone Size: 160 x 37 x 12 mm - (6.3 x 1.45 x .47 inches).
  • The highest quality sharpening stone set we've seen. Exactly what you would expect from Shapton!.
Check Stock

HAFLINGER Coffee Slipper - Earth, 44

  • FUNCTION: Lapping a receiver ensures a perfectly square and true surface for the barrel to mate against, enhancing accuracy.
  • ACCURACY: Honing the surface can produce optimal positioning of barrel nut so ideal torque can be achieved along with proper gas tube alignment.
  • CONVENIENT: Compatible with battery-powered or electric drills.
  • DURABLE: Steel construction with a black oxide finish.
  • INCLUDES: Includes: flex driver shaft, 220 Grit lapping Compound, steel lapping bar.
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454 Engineering Professional Reticle Leveling System

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings.
  • ACCURACY: Reticle leveling is key for scope accuracy, the Level-Level-Level & the Professional Reticle Leveling System provide this, with an integrated bubble level for precise measurement & Reference Level with a magnetic bottom for added stability.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

LEVINCHY Diamond Knife Sharpening Steel 12 inch, Professional Diamond coating Honing Steel, Premium Diamond Knife Sharpener Rod for all knives, Lightweight & Durable

  • Diamond Wet Stone Sharpener: Offering two-stage sharpening and a compact design, this lightweight diamond stone is great for the home, camper, tool box, gardening shed, and more.
  • Dual-Diamond Surface: Specialized fine diamond (25 micron / 600 mesh) hones any blade or chisel to a razor-sharp edge.
  • Specialized coarse diamond (45 micron / 325 mesh) quickly restores neglected edges.
  • Portable: Compact, lightweight diamond stone sharpener features convenient fold-and-go handles, which enclose and protect the diamond plate when not in use.
  • Fast & Easy: A micronized monocrystalline diamond surface sharpens edges faster and easier than conventional sharpening stones.
  • No messy oils are needed either -- sharpen lapping plate dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
Check Stock

Wheeler Scope Mounting Combo Kit with FAT Wrench, Alignment and Lapping Bars, and Storage Case for 1 Inch and 30mm Rings

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" & 30mm scope ring lapping bars, 1" & 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock, and Wheeler PRLS Reticle Leveling System.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope, adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings, the barrel clamp level features non-marring pads to ensure no damage is done at the contact points.
  • ACCURACY: Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Shapton Naoru Cast Iron Lapping System

  • Large 10 x 4 inch surface laps sharpening stones with ease and speed.
  • Size: 10 x 4 x1 inch (250 x 101 x 28 mm).
Check Stock

Cast Iron Lapping Plate 10\ x 10\ - Marking Plate Hand Scrapper 250 x 250mm New

  • Cast Iron Lapping Plate 10" x 10" - Marking Plate Hand Scrapper 250 x 250mm New.
Check Stock

Cast Iron Lapping Plate 12\ x 12\ - Marking Plate Hand Scrapper 300 x 300mm New

  • Cast Iron Lapping Plate 12" x 12" - Marking Plate Hand Scrapper 300 x 300mm New.
Check Stock

Wheeler Rifle Receiver Lapping Tool for Gunsmithing Cleaning Rebuild and Maintenance

  • INCLUDES: Flex driver shaft, steel lapping bar, and 220 grit lapping compound.
  • EASE OF USE: Ensure a perfectly square and true surface to help you achieve an accurate, high performing firearm.
  • DESIGN: Steel construction with a black oxide finish.
  • CONVENIENT: Compatible with battery-powered or electric drills.
  • FUNCTION: Helps align the gas tube through the barrel nut holes and alignment of front and rear A2 sights.
Check Stock

Taytools 773420 One Piece 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a piece of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 773444 Set of Three Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a set of 3 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 773437 Set of Two Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a set of 2 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit float glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock