Top Suppressor Mounting System Reviews

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • ...with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
  • 【Wide Compatibility】This suppressor front and rear....
Check Stock

Tripp Lite TLP1208TELTV 12 Outlet Surge Protector Power Strip 8ft Cord Right-Angle Plug Tel/Modem/Coax Protection RJ11 & Dollar 150,000 Insurance Black

  • spikes: Surge protector with two outlets protects your personal computer, laptop, printer, scanner, router, phone, fax, modem, television, lamp or any other home/office electronics from dangerous power surges, spikes & line noise.
  • Premium surge protection with built in tel/dsl and gold coax jacks: This surge suppressor offers complete ac protection with twelve total nema 5 15r outlets, while built in RJ11 and 22GHertz gold coax jacks prevent surges from damaging your modem, phone, cable and satellite equipment 6 feet telephone cable is included.
  • Safety first high joule rating conforms to UL 1449 safety standards: An integrated 12a circuit breaker protects all outlets and shuts down connected equipment in case of overload.
  • Diagnostic LEDS confirm power, protection and line fault at a glanced.
  • 2880 joules mean maximum protection for your equipment.
  • Conforms to current UL 1449 3rd edition safety standards.
  • Convenient right angle plug & mounting options: This surge suppressor provides 12 total outlets and the ability to accommodate 4 large transformer plug without covering the remaining outlets, while the extra-long 8 foot ac power cord acts like an extension cord to give you the flexibility to reach distant outlets the right angle NEMA 5 15p fl....
Check Stock

Comp-Tac International Holster - Compatible with FMK 9C1 Gen 2 - Right Hand - Black

  • OWB Holster – The International is an outside the waistband (OWB) holster with a modular mounting design giving the user 16 holster options in 1.....
  • Mounting Options – To give you the flexibility needed for any application, three mounting options are included Belt Mount, Paddle Mount, Drop Offset....
  • Secure– Built-in retention adjustment allows the user to tighten or loosen the holster’s hold on your firearm, keeping it secure while in motion..
  • Extremely Durable - The International’s all-Kydex body provides a rigid material that is custom fit to each firearm and maintains its shape even....
  • Compatibility - Our International Holster is cut down in the front to fit most Optic Sight and has a .5" tall sight rail to fit most suppressor/optic....
Check Stock

Comp-Tac International Holster - Sig - P226/RX/MK25 9mm/40 Rail - Right - Black

  • OWB HOLSTER – The International is an outside the waistband (OWB) holster with a modular mounting design giving the user 16 holster options in 1.....
  • MOUNTING OPTIONS – To give you the flexibility needed for any application, three mounting options are included Belt Mount, Paddle Mount, Drop Offset....
  • SECURE – Built-in retention adjustment allows the user to tighten or loosen the holster’s hold on your firearm, keeping it secure while in motion..
  • EXTREMELY DURABLE - The International’s all-Kydex body provides a rigid material that is custom fit to each firearm and maintains its shape even....
  • COMPATIBILITY - Our International Holster is cut down in the front to fit most Optic Sight and has a .5" tall sight rail to fit most suppressor/optic....
Check Stock

Tripp Lite 24 Outlet Surge Protector Power Strip, 15ft Long Cord, Metal, (SS7619-15)

  • ...D ELECTRICAL EQUIPMENT: Twenty-four NEMA 5-15R outlets protect connected equipment. Outlets are conveniently spaced 2.795 inches center-to-center, allowing enough room for most AC adapters and transformers without blocking adjacent outlets.
  • SAFETY FIRST! HIGH JOULE-RATING & PREMIUM SAFETY FEATURES: 1650-Joule, surge suppressor protects sensitive electronics from destructive AC transient surges and line noise. An 15-amp resettable circuit breaker prevents dangerous circuit overload. Lighted power switch with transparent snap-over guard to prevent accidental shutoff with integrated 15 amp circuit breaker.
  • 6-FT LOW PROFILE METAL FORM FACTOR WITH EXTRA LONG CORD: This surge suppressor fits in the most confined spaces unobtrusively - a 15-ft. long power cord acts like an extension cord to reach most wall outlets. Included adjustable mounting clips accommodate both vertical and horizontal installations.
  • LIFETIME WARRANTY: For peace of mind, the SS7619-15 comes with a lifetime warranty.
Check Stock

UTG OP3 Micro SLS Red 4.0 MOA Dot Side Loading Sensor

  • Precision Machined From 6061-T6 Aluminum Construction Finished In A Matte Black Anodization, Ipx7 Waterproof Rated, Wide Field Of View 23Mm Lens.
  • Red 4.0 Moa Single Dot With 8 Brightness Intensity Settings, Manual Or Automatic Dot Brightness Intensity Adjustment Via Surrounding Light Sensor.
  • 15,000+ Hours Battery Life At Middle Brightness Setting, Side Loading Battery Compartment, No Longer Necessary To Remove Sight And Re-Zero.
  • Mounting Base Interface Uses The Common Docter Footprint, Removable Low Profile Picatinny Mounting Base Included.
  • Co-Witnesses With Most Suppressor Height Iron Sights, Rear Face Of Optic Hood Laser Engraved With Tertiary Aiming Point.
Check Stock

UTG OP3 Micro SL, Red 4.0 MOA Single Dot, Side Loading, Black

  • Precision Machined from 6061-T6 Aluminum Construction Finished in a Matte Black Anodization, IPX7 Waterproof Rated.
  • Red 4.0 MOA Single Dot with 8 Brightness Intensity Settings to Accommodate Different Weather/Light Conditions, Wide Field of View 23mm Lens.
  • 15,000+ Hours Battery Life at Middle Brightness Setting, Side Loading Battery Compartment, No Longer Necessary to Remove Sight and Re-zero.
  • Mounting Base Interface Uses the Common Docter Footprint, Removable Low Profile Picatinny Mounting Base Included.
  • Co-witnesses with Most Suppressor Height Iron Sights, Rear face of Optic Hood Laser Engraved with Tertiary Aiming Point.
Check Stock

Hot Suppressor Pouch Heat Insulation Melt Resistant Rifle Pistol Silencer Storage Holster Multi-Purpose Molle Pouch Holder for Flashlight | Baton | Other Tactical Accessories

  • Designed to store and transport your either hot or cool suppressor safely when not in use, the nylon storage molle pouch adjust to fit a variety of sound suppressors as well as flashlights and other accessories.
  • The liner material is made of fire-resistant material that is rated to 1800°F of this suppressor pouch. The outer shell is made of durable 1000D nylon pouch, drain hole with metal grommet on the bottom quick cooling.
  • Large molle pouch with adjustable buckle for different length suppressors, rang from 6 to 9inch on length, elastic band for tight different size suppressors or flashlights, up to 1.75inch diameter, secure the suppressor ,flashlight, or baton inside the pouch.
  • With its heat insulation feature, this silencer storage bag can hold high temp suppressor right away after rang training, no longer have to wait the suppressor to cool, prevent the hot suppressor brunt or melt other tactical accessories.
  • Featured with mole attachment on the back for attaching on your rang bag, tactical backpack, tactical vest, molle rifle case, etc.
Check Stock

Comp-Tac Spartan IWB Hybrid Holster - Compatible with CZ P10 C - Right Hand with 1.5 Black Standard Clip

  • OWB Holster – The International is an outside the waistband (OWB) holster with a modular mounting design giving the user 16 holster options in 1.....
  • Mounting Options – To give you the flexibility needed for any application, three mounting options are included Belt Mount, Paddle Mount, Drop Offset....
  • Secure– Built-in retention adjustment allows the user to tighten or loosen the holster’s hold on your firearm, keeping it secure while in motion..
  • Extremely Durable - The International’s all-Kydex body provides a rigid material that is custom fit to each firearm and maintains its shape even....
  • Compatibility - Our International Holster is cut down in the front to fit most Optic Sight and has a .5" tall sight rail to fit most suppressor/optic....
Check Stock

Tripp Lite 8 Outlet Surge Protector Power Strip, 10ft Cord, Right-Angle Plug, Tel/Modem/Coax/Ethernet Protection, RJ11, RJ45, & $250,000 INSURANCE (TLP810NET) Grey

  • ...s your high-definition TVs, PC, personal computer, laptop, printer, router, phone, fax, modem, television, cable, satellite equipment, or any other home/office electronics from dangerous power surges, spikes & line noise..
  • PREMIUM SURGE PROTECTION WITH BUILT-IN MODEM/COAX/ETHERNET PROTECTION: This home theater surge suppressor offers complete AC protection with eight total NEMA 5-15R outlets, while built-in RJ11, RJ45, and Type F coax jacks prevent surges from damaging your modem/fax/100Bt/cable/satellite equipment. Coaxial jacks provide digital broadband quality and can handle 2.2GHz bandwidth.
  • SAFETY FIRST! HIGH JOULE-RATING - CONFORMS TO UL 1449 SAFETY STANDARDS: Audible alarm notifies user when the unit is damaged and needs to be replaced. Automatic shutoff cuts power to all outlets when the protection circuit has been compromised. Diagnostic LEDS confirm when you are grounded and protected at a glance. 3240 joules mean maximum protection for your equipment. Conforms to current UL 1449 3rd Edition safety standards..
  • CONVENIENT RIGHT ANGLE PLUG & MOUNTING OPTIONS: This black surge suppressor provides eight total outlets, while the extra-long 10-foot AC power cord acts like an extension cord to give you the flexibility to reach distant outlets. The ri....
Check Stock

Belkin SurgeMaster 8-Outlet Surge Suppressor

  • Main Specifications Product Description Belkin Pivot Plug Surge Protector surge suppressor.
  • Device Type Surge suppressor Form Factor External Output connector(s) 8.
  • Manufacturer Warranty Limited lifetime warranty General Device Type Surge suppressor.
  • Form Factor External Power Device Input Connector(s) 1 Output connector(s) 8.
  • Dataline Surge Protection Phone line - NOTE: THIS PRODUCT CANNOT BE SHIPPED TO MASSACHUSETTS OR DISTRICT OF COLUMBIA (WASHINGTON, D.C.).
Check Stock

Concealment Express Athletic Wear KYDEX Holster fits Glock G43/43X | Ambidextrous | Black

  • ...ide height while allowing the cant (carry angle) to be adjusted anywhere from -30 to +30 degrees. Our unique design makes our tucka.
  • Holster Features – ‘Posi-Click’ Retention – Hear a Satisfying Click when Holstered – Ambidextrous – Over-cut Open-face to Accommodate Threaded Barrels – Accommodates Suppressor Height Sights – All Black Oxide Steel Hardware with Threadlock – Made 100% Start to Finish in the USA by Americans using All American Made Machinery & Equipment Unconditional Lifetime Warranty.
Check Stock

Cedar Mill Fine Firearms Elite Iron 1.5” x 7” Black – High-Temperature Mirage Suppressor Cover Burn Proof Silencer Wrap for Rifle, Can Wrap Gear for Sniper, Rifle, and Pistols

  • The Elite Iron High-Temperature Suppressor Covers are the perfect solution. Our covers are guaranteed to keep your suppressor secure..
  • It has advanced heat dissipation technology - keeping it cool even in higher temperatures...so no more burning hands when you need to remove it. Investing in this product will save you time and effort when removing your suppressor - no more burns or waiting long minutes for it to cool down..
  • The Elite Iron Suppressor Cover is the perfect choice when it comes to protection from extreme heat. It’s constructed with 1000 Denier FR Cordura fabric and lined with heat-absorbing carbon felt, NOMEX and CarbonX materials that can resist temperatures as high as 2,600° F. Now your semi-auto rifle is protected from any situation – no matter how intense it gets!.
  • Our suppressor cover is perfect for hunters, snipers, shooters of all levels, or anyone needing an effective way to reduce heat mirage while improving accuracy under pressure! Whether you're an elite operator looking for precision tools that have been battle proven or just a beginner looking for performance enhancement – these covers ....
Check Stock