Top Supply Drill Chuck Body Reviews

NEIKO 10529A 3/8\ Close Quarter Angle Power Drill | 55-Degree Angle | Variable Speed (0-1400 RPM) | 120 Volt

[CLOSE QUARTER]: This close quarter power drill has a 55-degree angle head that allows the drill to reach into places other drills can’t go and has a 3/8-inch keyed bit holder chuck for easy bit replacement to fit with a variety of applications with an included chuck key..
[ERGONOMICS]: Ergonomically designed paddle trigger and pistol grip is designed for precise drilling and RPM control and utilizes a grip that is slightly textured to prevent slips and increase accuracy and efficiency..
[VERSATILE]: The variable speed ranges from 0 to 1400 RPM for precision drilling in tight spaces with a forward/reverse switch that allows for easy directional changes to make fast work for home improvement jobs and more..
[APPLICATION]: Drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection..
[SPECIFICATIONS]: Power Supply: 120V ~ 60Hz, Motor Power: 3.8 Amps, ETL approved..

Check Stock

NEIKO 20754A 3/8” Drill Chuck Adapter | Chuck Drill for Impact Drivers with 1/4 Inch Quick Change Shank | Drill Converter Includes 1/2-Inch Adapter for Impact Guns | Hex to Chuck Drill Bit Adapter

TRANSFORMS IMPACT DRIVERS: This mini drill chuck is an easy way to adapt or convert cordless impact drivers, cordless power tools, and wrenches to do....
EASY ON AND OFF: Socket drive chuck adapter has a 3-jaw chuck securely holds round-shank drill bits and includes 1/2 inch adapter to quickly go from....
DRILL CHUCK EXTENSION: This chuck for your impact drill extends the reach of your impact drill or driver. Gives you the freedom of one-handed drilling....
HEX SHANK DRILL: Drill chuck for impact driver has a standard 1/4" hex drive chuck is an excellent fit to power tools and is constructed of Cr-V metal....
FITS A WIDE RANGE OF BITS: Hand drill adapter is the ideal capacity and clamping range for all drill bit sizes from 1/16” to 3/8” drill bits to....

Check Stock

Hakkin 6 Sizes Drill Chuck Key Wrench, 3/4\ 5/8\ 1/2\ 3/8\ 1/4\ 5/32\ Carbon Steel Heavy Duty Thumb Handle Chuck Key, Replacement Drill Chuck Key Wrench, Electric Drill Clamping Tool

【Material】The Drill Chuck Key Wrench is made of solid carbon steel and coated with durable plastic, which is anti-rust, anti-slip design, reducing stress damage within a certain limit. Among 5/8" drill chuck key wrench is made of chrome vanadium steel..
【Diameter】Thumb grip styles increase leverage and user comfort. Chuck Diameter: 3/4" (20mm), 5/8" (16mm), 1/2" (13mm), 3/8" (10mm), 1/4" (6mm), 5/32" (4mm). Salient Point Diameter: 0.35" (9mm), 0.31" (8mm), 0.24" (6mm), 0.24" (6mm), 0.2" (5mm), 0.12" (3mm)..
【Function】Thumb handle chuck key can be used in hammer or drilling mode. The Replacement Drill Press Chuck Key is a kind of electric drill clamping tool, perfect to tighten or loosen a chuck, which allows a quick change of your drill bit heads. Note: do not hit the chuck key handle with a hammer or other impact tools..
【Application】6 specifications to meet a variety of drill chuck fastening and loosening needs, can be compatible with most of power tool brands..
【Storage and Use】The small key allows for easy storage and use. Applicable products: Hand drill, hammer drill. Ideal tool kit for keeping drill bits in place..

Check Stock

uxcell Drill Chucks, 1.5-10mm Capacity 3/8-24 UNF Threaded with Chuck Key for Electric Impact Corded Cordless Drill

[SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
[CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
[3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
[APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
[MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.

Check Stock

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

[SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
[CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
[3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
[APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
[MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.

Check Stock

Keyless 1/2 13mm Drill Chuck Drill Chuck Adapter for Impact Driver Quick Connect

Production Name: 1/2" Drill Chuck for Impact Driver 1/2"(2-13MM),Fits Bit: 1/5" - 1/2"(2-13mm),Suit for: Standard Impact Driver.
The 1/4" hex adapter is for screwdriver, fits most standard impact driver.
Very Convient: With keyless design-drill chuck, easily lock bit or tools by hands,save your time and energy.
Durable: With high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating,it is very....
Widely used for heavy duty drill work as to hard material such as drill hole on wall or stone.

Check Stock

Cordless Drill into a Wall

➤ Cordless Drill with 1/2 Chuck: 1/2 in. ratcheting chuck provides superior bit gripping strength. Compared with 3/8" drills has unbeatable....
➤ High Performance: 400 in-lbs torque, 2 variable speed setting(0-400rpm&0-1,600rpm), 20+1 torque settings. This drill covers most occassions, allow....
➤ Ergonomic Designs: drill body little bit larger than 3/8" drills with much more solid, higher performance. The side handle increased comfort,....
➤1,000+ Cycle Use Battery: PowerSmart 20V battery allows at least 1,000 cycle use. The included 1,500mAh battery was tested can driver #8x1-1/2 in.....
➤ What's more: built-in LED foot light, battery indicator, rubber-covered handle, etc. Backed by a 2-year, limited warranty so you can buy with....

Check Stock

Chuck handtite keyless 1/2-Inch carded

For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.

Check Stock

Sheet Metal Attachment, Metal Nibbler Saw Cutter Electric Scissors Power Drill Cutting Tool Double Head

【Feature】：It is not necessary to remove or replace the existing drill chuck as the drive shaft of the F2008-1 inserts directly into a standard 3/8"" or larger capacity drill，Hexagon handle does not slip, precision operation..
【Cutting Capacity】:Tool head hardness up to 58-60: this cutter is more convenient than others, cutting speed is excellent, and no burr。small body, great action, strong power, easy to conquer the work / life problems.
【Easy To Install】: electric scissors converts your power drill into a power shear. To operate this time-saving tool, simply insert the directly into any 3/8-inch chuck of a standard 1200 RPM A/C or cordless drill..
【Safe & Durable】: this cutter is more convenient than others, cutting speed is excellent, and no burr.metal cutting shears sheet won't scratch your hands. And it's easy and convenient to operate..
【Cutting applications】: Metal sheet cutter head is a multi‑functional cutter, it has universal 7mm hex shank for electric drill replacement. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels..

Check Stock

GALAX PRO 12V Lightweight Cordless Rechargeable Drill Driver, 3/8 Inch Keyless Chuck, 18 Torque Setting, With A USB Charging Cable,2 Screwdriver Bits and 3 Drill Bits (GP95610)

3/8” Keyless chuck and variable trigger: The Keyless chuck is inside the machine, when you install the rotor, turn the black part of the head to turn the Keyless chuck out..
This 12V electric drill can provide powerful torque(17+1).
3/8” keyless ratcheting chuck can hold most bits also makes them ideal for general-purpose drilling.
Variable speed trigger allows you to select different speeds depending on the task at hand.
Integrated design: streamlined body, built-in battery, USB interface charging, a bright LED light for optimum illumination of dark work areas.
Rechargeable lithium-ion battery：Max 12V battery can support powerful torque (17+1 N.M).
Soft rubberized handle: Provide you with a comfortable grip feeling and less fatigue for most everyday tasks.
What you get: 1 x 12 V cordless drill, 2 x screwdriver bit, 3 x drill bit,1 x USB cable connection，1 x user manual.

Check Stock

Auger Power Drill Adapter, 4.1Inch Length Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver (Type A)

★Good Design: It with 2 flats on the 0.31 inch shank to match up with the chuck teeth on your cordless drill..
★Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
★Size Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
★Premium Material: The is made of durable steel, it provides a longer life, sturdy and durable..
★Application: The adaptor connects drill to Earth Augers..

Check Stock

Chuck Key 4 in 1 Drill Chuck Key, Chuck Key For Drill Press, Original Professional Master Chuck Key, Universal Key

Drill chuck for impact driver 4 way multi tool key is the ideal tool for unlocking and locking of various, popular drill chucks to keep drill bits in place.
Key tool is made of high hardness torsion bar, which can withstand greater resistance, stronger force, sturdy and durable, ideal electric drill accessories..
Black plating on the surface of drill chuck key, deep anti-rust, compact and wear-resistant.
Drill press chuck key's center square feature is ideal for opening acetylene tanks.
Central machinery drill press have four sizes to, you can open many kinds of electric drill locks with just one chuck key..

Check Stock

VISLONE 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter

【Strong Material】This chuck drill adapter is made of ABS + Aluminum + Steel, tough and durable, lightweight and easy to carry..
【Powerful Function】The drill chuck of the tool adopts standard 0.8mm-10mm drill bit. 1500RPM and 25N·m torque - This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm..
【Easy to Use】 This angle head screwdriver bit is easy to install and use, the screwdriver handle is very stable..
【Extension Chuck】90° extension right angle chuck, it can work in hard to reach places, it is a practical accessory..
【Universal Application】The 8mm hex shank of the elbow drill chuck is suitable for most standard drills: hand drills, electric drills, polishing equipment, etc..

Check Stock