Top Super Bender Reviews

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

IDEAL Electrical 74-047 Aluminum Bender – Aluminum, Conduit Pipe Bender w/handle for 3/4 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the aluminum conduit bender offers application in plumbing repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with aluminum, the rugged construction of the lightweight iron bender head offers durability to withstand long-term heavy-duty use and convenient handling. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the aluminum pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Aluminum EMT bender is suitable to bend 3/4 in. EMT metal pipes as well as 1/2 in. Rigid & 1/2 in. IMC pip....
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

Mophorn 1/4 to 7/8inch Tubing Bender 7 Heads Nylon Hydraulic Pipe Bender Copper 90 Degrees Multi-function 6-22mm Manual Ratcheting Tubing Bender Set with Bending Function Carrying Box

  • 90° Tube Bending: The ratcheting tube bender can easily and smoothly bend the diameter of 6, 8, 10, 12,16, 20, 22 mm tubes to 90 degrees. Mechanical....
  • 1/4"-7/8" Bending Range: We provide 7 interchangeable tube bender heads, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy....
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good....
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with....
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum tubes. It is widely used in sanitary and heating installations, floor....
Check Stock

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 1/4 to 7/8 inch (6-22 mm) tubes both forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
  • 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hyd....
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

  • Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
  • This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
  • The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
  • The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
  • Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....
Check Stock