Top Sump Motor Assembly Reviews

VEVOR 1.5 HP Submersible Cast Iron and Steel Sump Pump, 6000 GPH Submersible Water Pump with Integrated Vertical Float Switch, for Basement Water Basin and Flooding Area

  • 1.5 HP Power for Your Pump: Our submersible sump pump can lift water vertically up to a height of 33' and moves water up to 6000 gallons per hour. The 1100W efficient copper motor with thermal overload protection and 45dB low noise ensures secure and excellent performance. It is perfect to keep your basement dry during a heavy water flow like rain, snow melting, etc. Using your new sump pump is gonna be a blast!.
  • Designed to Last: High-quality materials are guaranteed for high-quality results. The basement sump pump features a corrosion-proof cast iron frame with a rust-proof surface and high-quality stainless steel for long-lasting underwater use. It comes with an IPX8 waterproof rating and has achieved UL certification, so there is no need to worry about the quality..
  • Hands-free Operation: Wouldn't you prefer to sit from the comfort of your couch and let your pump do its job? Well, now you can! Thanks to the vertical float switch, our heavy-duty sump pump will start working automatically when the water level rises above 8.7" and stop working when the water level is below 4.7". It is designed for energy-saving and labor-saving use in draining ap....
Check Stock

Rainbro 1/2 HP Thermoplastic Submersible Sump Pump With Vertical Float Switch, Model# PSU050V

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Sump Pump Alarm & Protector – Monitors Your Pump Energy (HP) and Cuts Off When Dry Run, Overload or Stuck On Float Switch Detected – Works w/Out Water Level Sensors as in/Outdoor IP64 WiFi Plug

  • LESS WORRY & MORE FUN – Monitor your pump from anywhere via Wi-Fi smartphone app – no need to rush to the basement to check on it.
  • SAVE ON ELECTRIC BILL – Why Is Your Sump Pump Endlessly Running? – Get the WiFi sump pump alarm and prevent the pump burnout when the float switch is stuck in “On” position or pump is obstructed.
  • KEEP YOUR BASEMENT DRY – Get push notification alerts if there is a power outage or pump failure.
  • DETECT & PREVENT COSTLY PUMP DAMAGE – The pump protector extends your sump pump life by sensing unusual load on the pump motor and stopping the pump before an expensive breakdown happens.
  • WIDE RANGE OF APPLICATIONS – It works great with any 1/6HP to 1HP 125VAC sump pumps, submersible pumps, sewage/effluent pumps, utility pumps, water well pumps etc.
Check Stock

Acquaer 1HP Sump Pump 4948GPH Submersible Drain Pump with Automatic Float Switch, Remove Clean/Dirty Water for Basement, Hot Tub, Pools, Garden Pond

  • High Performance: 1HP sump pump has large capacity and strong suction with Max. Flow 4948GPH or Max. Head 30ft. Powerful capacitor motor ensures efficient and quiet operation. This dirty water pump can handle up to 1-1/3″ soilds, ideal for draining flooded basement. It can also transfer clean water for garden irrigation.
  • Portable & Durable Design: Reinfored engineering thermoplastic casing resists corrosion and abrasion. Carrying handle with lightweight, easy to transport. Quality mechanical seal prevents leakage effectively for long service life. When dry running causes overheating, built-in thermal overload protection will shut down the pump to prevent burning..
  • Multi Outlet Adpater: 1-1/2'' NPT discharge comes with 1-1/2'' elbow adapter and snap coupling adapter of 3/4'', 1'' or 1-1/4'', easy to install. Higher base plate prevents debris collection in the sump pit. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Portable & Durable Design: Reinfored engineering thermoplastic casing resists corrosion and abrasion. Carrying handle with lightweight, easy to transport. Quality mechanical seal prevents leakage effectively for long service life. When dry running, built-in thermal overload protector will shut off the pump....
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • Automatic Submersible Sump Pump: with integral diaphragm switch activates when Water reaches 7 to 10 inches and shuts off when Water drops down between 1 and 4 inches.
  • Built To Last: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • Continuous Duty Motor: 1/3 HP shaded pole Motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • Applications: designed for sump Pump systems and general Water transfer application.
  • must sit in Water to activate the switch.
Check Stock

Little Giant 9S-SMPXRT-K 4/10 HP, 115-Volt, 6000 GPH Pre-Packaged Simplex Sewage Basin/Pump System - Assembly Required, Black/Blue, 509074

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Automatic Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch

  • Indoor Use Only - This 1/2 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU800 can pump up to 5,100 GPH to keep your basement dry..
  • Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • Additional Features - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Wayne 58321-WYN3 CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch, Large, Silver

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

THE BASEMENT WATCHDOG Model SIT-50D 1/2 HP 4,400 GPH at 0 ft. and 3,540 GPH at 10 ft. Cast Iron Submersible Sump Pump with Top Discharge and Caged Dual Micro Reed Float Switch and Controller

  • 3,540 GPH at 10 ft. to quickly empty the sump pit.
  • 1/2 HP energy efficient, permanent split capacitor (PSC) motor saves money on your electric bills.
  • Dual carbon ceramic and one Buna-N, shaft seals protect the motor from water.
  • 2 Floats in a protective cage for added redundancy. Protective cage prevents debris or wires from interfering with float operation.
  • Top discharge design and closely-mounted, adjustable caged dual float switch, it is ideal for use narrow sump pits.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Submersible Sump Pump with Extended Leg Kit and Integral Diaphragm Switch 10-Ft Cord Blue 506162

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 10 to 13 inches and shuts off when water drops down between 4 and 7 inches (with leg kit in place).
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
  • 1.5-inch FNPT discharge, three 3.5-inch leg extenders included.
Check Stock

WAYNE - 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - 6,100 Gallons Per Hour - Heavy Duty Basement Sump Pump

  • INDOOR USE ONLY - This 1 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU1000 can pump up to 6,100 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use.
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance.
  • Assembled in the US with foreign and domestic parts..
Check Stock

Ice-O-Matic KPU090 Pump Kit for Ice Maker GEMU090

  • PUMP KIT FOR GEMU090: The Ice-O-Matic Pump Kit designed for the GEMU090 Nugget Pearl Ice Machine, Pump kit installed inside the ice maker cabinet for built in applications..
  • IDEAL FOR ICE MACHINES WHERe FLOOR DRAIN IS NOT AVAILABLE: This ice bin sump pump is perfect for installation in office break rooms, doctors offices or residential homes, that might not have access to a floor drain..
  • PREVENTS FLOODING: This pump kit helps remove the water that condenses after ice melts inside the machine, preventing the ice maker from being flooded and making it easier to clean..
  • DRAINAGE: This part forces drain water to a maximum of 10 feet and includes the pump, wiring harness, and tubing. The check valve is designed to prevent repumping of drain water into the drain hose..
  • KIT INCLUDES: Pump and motor with check valve, Switch mounting bracket assembled to switch assembly, Wire harness, Pressure hose (clear), Drain hose (white preformed), Stainless Steel shield and Misc Hardware (Snap Bushing, Hose Clamps, Mounting Bolts and Screws).
Check Stock