Top Stud Cap Nuts Reviews

HFS (R) Hold Down Clamp Clamping Set Kit Bridgeport Mill (5/8

  • Includes: 24 studs (4 pieces of each 3",4",5",6",7",8" long), 6 step block pairs.
  • 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall caseDescriptionTable T-Slot size: 5/8" Stud size: 1/2"-13 T Nut No. TN-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2pcs Each size) Setp Block: STB-1, STB-2, STB-3 (2pcs Each size).
Check Stock

Southwest Wheel 3,500 lbs Trailer Axle Self Adjusting Electric Brake Kit 5-4.5 Bolt Circle

  • Pair of TruRyde 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud).
  • Pair of TruRyde 10" x 2 1/4" self adjusting TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
  • Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
  • Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649).
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

EZ STUD OUT Stud Removal Tool Universal kit

  • The Universal kit can be used on any flat surface where a broken stud has to be removed.
  • EZ Stud Out allows you to quickly replace broken studs with no drilling or tapping.
  • Universal Kit comes with 3 plates, 25 EZ Stud Out Thin Nuts, carbide burr and a rugged and durable plastic case.
  • No need to be a highly skilled technician, good for DIY.
  • Even removes broken studs that are recessed in cylinder head.
Check Stock

JIALITTE QD Swivels Stud Mount Adapter for Mlok Rail System

  • Stud Mount Precision Machined from Aircraft Grade Aluminum with Matte Sand Hard Coat Anodize..
  • Can be fixed to Swivels 1.0, 1.25, 1.5 Inch for convenience connection with Stud design..
  • Provide T-nuts, screws and assembly allen key for installation easily..
  • Swivels Stud can be rotated 360 degrees. Made by Strong and Durable Steel..
  • Made using the highest quality materials, lifetime warranty, We provide 100% Satisfaction Money-Back Guarantee..
Check Stock

Venum wheel accessories 20 Pc +1 Key - Black Solid Spike Lug Nuts | 1/2"-20 Thread | 4.5" Tall | Works with Chevrolet GMC C10 K10 1/2 Ton Trucks K5 Blazer Jimmy - Aftermarket Wheels

  • *Aftermarket Lug Nuts for AFTERMARKET WHEELS, NOT OEM replacements* Please verify fitment prior to purchasing the product sizing might be different than the Lugs you already have-compare dimensions against your own..
  • 2.25”Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • For Trucks with wheel studs requiring a 14mm x 1.50 or 14x1.50 or M14x1.50 thread and wheels that take a conical/ cone seat. Kit include 32 Chrome Lug Nuts M14x1.50.
  • ❌ Do not use a power wrench/ impact wrench/ pneumatic wrench.
  • Goes with Chrome Rims, Black rims and various other rims.
Check Stock

Wheel Accessories Parts Set of 24 Chrome 14x1.5 Lug Nuts for Truck Spline Bulge Acorn 2\ Long M14x1.5 Thread Small Diameter Lug Nut Wheel Kit with 1 Socket Key

  • For Trucks with wheel studs requiring a 14mm x 1.50 or 14x1.50 or M14x1.50 thread and wheels that take a conical/ cone seat..
  • 2" Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • Small Diameter lug nuts are heat-treated for the perfect blend of strength and style..
  • Kit include 24 Chrome Lug Nuts M14x1.50 and 1 Dual Hex Key.
  • Full money back guarantee. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result..
Check Stock

1/4-20 Acorn Cap Nuts, 304 Stainless Steel 18-8, Plain Finish, Quantity 50

  • The stainless acorn cap nuts are 100% stainless steel 18-8 which offers a high level of chemical and corrosion resistance..
  • MewuDecor stainless six sided cap nuts are great for general applications and wet environments. They are strong, corrosion proof, and will support all of your project purposes..
  • Package Included: 50 PCS Cap Nuts 1/4-20..
  • Acorn Cap Nuts are great to have around for use in wood and wet environments..
Check Stock

Wheel Accessories Parts Set of 20 Chrome 12x1.5 Lug Nuts Acorn Cone Seat 1.38” Long Car/Truck, 13/16” Hex Wheel Lug Nut - Fits Hyundai Elantra, Sonata, Kia Optima, Toyota Camry, Corolla, RAV4, Tacoma

  • For cars with wheel studs requiring a M12 x 1.50 or 12x1.5 thread and wheels that take a conical/ cone seat..
  • 1.38” Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • Kit includes 20 Chrome Lug Nuts Goes with Chrome Rims, Black rims and various other rims.
  • ✔️COMPATIBILITY: These lug nuts are designed to fit Hyundai Elantra, Sonata, Kia Optima, Totyota Camry, Corolla, Rav4, Tacoma, Lexus, Mazda models from selected years. Please make sure to check the fitment tool by entering your vehicle details before purchase!.
  • ❌ Do not use a power wrench/ impact wrench/ pneumatic wrench.
Check Stock

RockTrix 2 inch Wheel Spacers (4x4 Bolt Pattern, 68.5mm Bore, 12x.1.25 Studs, Cone Seat Nuts) Compatible with Yamaha Golf Carts (Widens Track by 4 inches) - 50mm 4x101.6 4pcs

  • RockTrix Wheel Spacers fits many 4/4", 4/101.6, 4/100 Bolt Pattern Golf Carts and ATVs. Buyers need to also verify: 1) Vehicle Centerbore is no larger than 68.5mm.
  • 2) Vehicle Wheel studs and lug nuts are M12x1.25 12x1.25mm threads.
  • 3) You have 2.0" (50mm) of space between your fender and your wheel/tire.
  • 4) Your current wheel studs are shorter than 2.0" (50mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit..
  • [SPECIFICATIONS] Four (4) Wheel Spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x4" (4x101.6 or 4x100) | Hub Center Bore: 68.5mm | Stud/Nut Thread Size: 12x1.25.
  • [BENEFITS] Increases clearance to allow installation of larger or wider rims/wheels/tires. Gives your golf cart or ATV body a more aggressive stance. Improves handling characteristics and stability. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading..
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can i....
Check Stock

Wheel Accessories Parts Set of 32 14x1.5 Lug Nuts Black 1.90' Long for Trucks 19mm(3/4') Hex Bulge Acorn Lug Nut M14x1.50 Thread Cone Seat Wheel Lug Nuts for Trucks 32 PC Black

  • For Trucks with wheel studs requiring a 14mm x 1.50 or 14x1.50 or M14x1.50 thread and wheels that take a conical/ cone seat..
  • 1.9”Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • Full money back guarantee. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result..
Check Stock

New 58 Pcs Pro-Series 1/2\ T-Slot 3/8\-16 Stud Clamping Kit for Bridgeport Mill

  • Made of high quality casting steel for long life and increased durability..
  • 24 Studs: 4 each of length: 3"-4"-5"-6"-7"-8" 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps.
Check Stock

CVLIFE Bipod Adapter Bipod Mount for M-Rail 4 T-Nuts 4 Screws and 1 Wrench

  • Made of high quality aluminum construction with black anodized finish..
  • Fits on rails and works with the most common bipods in the market,can also be used as a sling stud when bipod is removed..
  • Upgraded T-nuts design increases width to provide a sturdy support for bipod. Two convex blocks on both sides can resist much more recoil to provide a solid stability..
  • Comes with extra set of the screws and T-nuts for further using..
  • Enhanced sling stud won't strip off. If you receive a defective item, feel free to contact us and we will send you a new one or 100% refund you..
Check Stock