Top Stroke Small Engine Oil Reviews

TFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW

【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
Packing size:133x71x38.5cm/52.3''x27.9''x15''.
【Main Parameters】Control System: #93 gasoline.
Recommended Propeller range: 3 -9"1/4''x8".
Recommended Lubricant: 2 Stroke Lubricating oil.
【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
After use, the fuel in the carburetor must be completely discharged..
【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....

Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....

Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..

Check Stock

BILT HARD Gas Engine 79cc, Gas Motor for Go Kart, Mini Bike, Log Splitter, EPA & CARB Certified, 4 Stroke OHV Horizontal Shaft with Recoil Start

Wide Application: HILT HARD 4-stroke engine is an easy-to-install solution for small engine needs. Great for residential or commercial lawn and garden equipment applications, weed eaters, tillers, cultivators, back pack blowers, trimmers, agricultural equipment, construction/industrial equipment, and a great array of applications to include..
Super Durable: This tough gas engine features a durable cast iron cylinder that withstands wear and abuse, fuel shut off for safe transport and gas saving overhead valves for a cooler, cleaner performance.(engine oil is not include).
Excellent Performance: 4-stroke engine delivers powerful, quiet, cleaner performance with low vibration which reduces work fatigue, making it ideal for small equipment applications and as a replacement for the standard 2-stroke high emission engines used in these applications..
Industrial Grade Made: All BILT HARD engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. 3,600 RPM engine speed, splash-lubrication system provides efficiency. Easy-reach recoil starter system with auto-decompression..
Noted: Every item will be Oil Tested before packaging, so it may look used or touch a little oily, but 100% new ....

Check Stock

Pontoon [Explicit]

【High Performance】Max.speed(r/min): 4500-5500,Displacement: 169CC,Gear ratio: 2.08(27:13),Control System: Tiller control,Starting System: Manual start,Control System: #93 gasoline.Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
【Water Cooling System】Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant m....

Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....

Check Stock

Minn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft

♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
Recommended Lubricant: 2 Stroke Lubricating oil.
♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
Recommended Propeller range: 3 -9"1/4''x8".
♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..

Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..

Check Stock

CYJZWOH Outboard Motor - New 2 Stroke 4 HP Boat Engine 63CC Boat Engine with Air Cooling System

Standard CDI ignition system for easy starting and improved performanceSuperior engine air cooling system for improved engine performance, to improve the reliability of the whole machine.
Durable cast aluminum construction for superior corrosion protection, Economical and compact structure.
Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
Wide use: It can be used for different small boats with different kinds of material from 2 to 4 meters length,such as air boats,wooden boats,glass boats,rubber boats,yachts, inflatable boats,sailboatsand other mini boats..
Note:For this 2 stroke outboard motor, you need to use gasoline and oil mixed fuel, the gasoline and oil mixing ratio is 25:1. Please use 93# gasoline and 2 stroke engine oil..

Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..

Check Stock

Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..

Check Stock

6HP 2-Stroke Outboard Motor, Heavy Duty Boat Motor Kayak Motor Fishing Boat Motor Engine Water Cooling System (6HP 2-Stroke, Water-Cooling)

【2 Stroke, 6 Horsepower】The 6HP 2-Stroke engine provides all the power you need for motoring in your boat. The superior engine water cooling system improving engine performance. It will make you more relaxed and efficient whether work or play!.
【Main Parameters】Full throttle operating range 5000-6000r/min.
Idling speed ( in neutral) 1000±100 r/min.
Engine oil mixing ratio Fuel 50: Engine oil 1.
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
【360° Steering】360 degree rotation, rotating in the opposite direction without changing speed. Allows you to reverse without shifting gears. It is suitable for various styles of small watercraft, such as kayaks, canoes, dinghies, and inflatable boats..
【Inline Propeller Design】The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard exhaust and thrust. And it has a tilt or lift function, and can be used for shallow water operation for your convenience..
【CDI Ignition System】The ignition system of this motor is a CDI ignition system. You can start the motor quickly and safely. It saves your ti....

Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....

Check Stock