Top Straight Terminal Ball Valve Reviews

JDMSPEED New Red Solenoid Relay 12V Heavy Duty Replacement For Ford Starter Car Truck - SW3 - SNL135

  • Brand New and High Quality Aftermarket Replacement Part.
  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance.
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Replacement For AEROSTAR, Replacement For BRONCO, Replacement For BOBCAT, Replacement For BREEZEWAY,....
  • Maximizes performance. Made from high-quality materials. Easy installation.
Check Stock

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

Parts Unlimited 12V Heavy Duty Battery - HYB16A-AB HCB16A-AB

  • Factory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion.
  • Patented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durability.
  • Heavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storage.
  • Large over the partition straps and welds increase durability, power output, and life.
  • Patented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitment.
Check Stock

JDMSPEED New Starter Solenoid Relay SW-3 Replacement For Ford Jeep Lincoln Mercury 1958-1991

  • Brand New and High Quality Aftermarket Replacement Part.
  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance.
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Replacement For AEROSTAR,Replacement For BRONCO, Replacement For BOBCAT, Replacement For BREEZEWAY, Replacement For CALIENTE, Replacement For CAPRI, Replacement For COMET, Replacement For COMMUTER, Replacement For COUGAR,Replacement For CYCLONE, Replacement For MARAUDER, Replacement For MARQUIS, Replacement For MONTCLAIR.
  • Maximizes performance. Made from high-quality materials. Easy installation.
Check Stock

J Bryant Gym Machine Accessories for 5mm Cable Ball Stopper Interface Port Components Fitness Equipment Wire Rope Port Joint Replacement Parts for Home Gym Machine Use

  • SIZE: The ball is 4cm diameter, with 1cm hole. The bowl-shape plate has a 38mm diameter, with 7mm hole. The metal eyelets terminal is used for cables with a diameter of 5mm and an internal steel wire diameter of about 3mm. The wire rope clamp is for a 5mm rope or cable..
  • DURABLE MATERIAL: The ball is made of high quality plastic, the bowl-shape plate is made of metal alloy. The eyelet terminal is made of metal alloy. The wire rope clamp and thimble are made of 304 stainless steel..
  • USE: Use a hydraulic crimper (plier) tool to link the cable with the metal eyelet terminal. The ball, bowl-shape plate and the terminal.
  • you can use as ball stopper set on cable machine. Put the wire rope thimble together with the clap and cable, it can use as clothesline or fence line, the thimble and clamps are wear-resistant..
  • You can choose the appropriate connector type according to the training equipment or sports environment, which is convenient and practical..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Mighty Max Battery ML18-12 - 12V 18AH 51913, K1200LT K1200RS Replacement Motorcycle Battery Brand Product

  • Factory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion.
  • Patented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durability..
  • Heavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storage..
  • Large over the partition straps and welds increase durability, power output, and life..
  • Patented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitment..
Check Stock

Relationshipware StratoLauncher IV Ultimate Tilting Water Rocket Launcher + StratoFins Kit

  • Easy to assemble metal water rocket launcher with a 125 PSI safety valve. Rocket will NOT fly straight without an aerodynamic nose cone made from a....
  • Kit includes StratoLauncher IV, StratoFins, ball head, pressure gauge, QConnect w/valve (tank not included). Watch assembly video on this listing at....
  • StratoLauncher IV Ultimate will propel a 2 liter plastic (PET) soda pop bottle over 350 ft. in the sky. Watch the last minute of the assembly video....
  • Supports most .5L, 1L, 1.25L, 1.5L, 2L soda bottles @ air pressures as low as 15 PSI up to 120 PSI..
  • Kit is fully upgradeable, expandable, & can be accessorized into a complete launching system for STEM..
Check Stock

2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves

  • High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
  • US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
  • Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
  • Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
  • High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock

VOSAREA 4-Terminal 12V Solenoid Relay Heavy Duty Car Refit Solenoid Valve Auto Control Switch Fit for Ford Starter Car Truck SW3 SNL135

  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance, sealing is made of....
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post..
  • Maximizes performance. Made from high-quality materials. Easy installation.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Suitable for AEROSTAR, BRONCO, BOBCAT, BREEZEWAY, CALIENTE, CAPRI, COMET, COMMUTER, COUGAR, CYCLONE,....
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock