Top Straight Flute Tap And Die Set Reviews

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell M3 M4 M5 M6 M8 Hand Threading Tap Set High Speed Steel Straight Flutes Metric Thread Screw Taps Bronze Tone 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Straight flute design, clear threads with no burrs..
  • Applications: Can make new threads or re-thread damaged or jammed threads. Tap most materials in through or blind holed conditions..
  • Material: High-speed steel hand taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Features: Provide downward chip removal, and fast tapping with accuracy..
  • Tips: Hand taps are operated by tap wrenches. Suitable for drilling or tapping aluminum, die steel, mild steel, copper, hard plastics, etc...
Check Stock

uxcell M3 M4 M5 M6 M8 Hand Threading Tap Set High Speed Steel Straight Flutes Metric Thread Screw Taps Uncoated 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Straight flute design, clear threads with no burrs. Provide downward chip removal, and fast tapping with accuracy..
  • Applications: Can make new threads or re-thread damaged or jammed threads. Tap most materials in through or blind holed conditions..
  • Material: High-speed steel hand taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Coating: Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Tips: Hand taps are operated by tap wrenches. Suitable for drilling or tapping aluminum, die steel, mild steel, copper, hard plastics, etc...
Check Stock

uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

  • Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 9/16 -24 UNEF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 9/16"-24 UNEF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 9/16 -18 UNF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 9/16"-18 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 1/2\-13 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 1/2"-13 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 1/4\-20 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: 1/4"-20 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 9/16\-20 UN, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 9/16"-20 UN thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 5/16\-18 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: 5/16"-18 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock