Top Stm32f103cblack Pill Reviews

DEVMO Digital Oscilloscope Kit 2.4″ TFT Handheld Pocket-Size DIY Parts Fully Assembled Electronic Learning Set

★It allowed making a practical tool for audio and video synchronization at same time, low-frequency switching power supply , infrared receiver transmitter signal waveform and many other occasions, effectively observed and measured , increased interest in learning, improve learning outcomes..
★Component species diversity for students to identify elements , inline elements welding, soldering SMD components training..
★Training for electronic production , complete detailed descriptive information , like schematics , instructions, etc., making a high success rate..
★Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4 -inch color TFT display can be used as test ARM development board..
★Available source , which can be secondary development kit based on , for example, it can be changed to Millivoltmeter , data loggers , and so on..

Check Stock

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32-Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3

⭐【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K..
⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
⭐【Upgrade Features】Support BLtouch, filament detection, power-off resume, automatic shutdown, etc ..
Increase the distance between the driving....
⭐【After-sales Support】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical....

Check Stock

Oscilloscope Multimeter, 2-in-1 Intelligent Digital Scope Meter Multimeter, Professional LED Handheld Oscilloscope Multimeter with 200ksps A/D Automatic Waveform Capture Function

DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..

Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..

Check Stock

ALMOCN for Digital Oscilloscope Kit Open-sourced 2.4″ TFT 1MSPS for Digital Oscilloscope DIY Kit Handheld Pocket Sized 13803K, SMD pre-soldered

Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions..
With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable..
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..

Check Stock

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah V1.0 for Creality Ender3 with BLTouch Extension Cable Kit

⭐【Main Control Chip Features】This new SKR Mini E3 V2.0 motherboard uses the STM32F103RET6 main control chip, and its flash memory size is 512K..
⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
⭐【BLTouch V3.1】BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any....
⭐【After Sales】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical after-sales....

Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..

Check Stock

WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display

DC Power and Probe are Not included. With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (NOT Included), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display.
Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value.
Adopts ARM Cortex-M3 processor (STM32F103C8).
Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error.
Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate.
Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls contact us if have any quality issue and need support, will reply within 24hours, refund or replace with a new one.

Check Stock

HGLRC FD445 Flight Controller Stack Forward F4 Mini FC BLHeli_32 FD45A 4in1 2S - 6S Electric Speed Controllers for RC Racing Drone Quadcopters

High-end quality Highest quality MOSFETS , Betaflight OMNIBUSF4 V6 STM32F405 MCU , MPU6000 accelerometer/gyro (connected via SPI) , On-board Betaflight OSD.
High integrationIntegrated 5V/3A BEC Output , Support 2S - 6S power input, Easy and quick OSD configuring Integrated with STM32F405R6T6 chip, compatible with Betaflight and Cleanflight (support DHOTS150/300/600/1200) ESC with high operating speed, which achieves excellent flight experience. Moreover, it can generate powerful calculating ability and velocity , easier, stable and smooth flight experience.
Higher frequency Forward F4 FC has a more powerful STM32F405RGT6 MCU operating at a higher frequency , making everything run smoothly . You can add GPS and anything else you like freely because the CPU utilization is lower ..
Why Choose Us We are the Original HGLRC manufactory , If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours . Choose us risk free today. Click the Orange Button to Buy Now :).

Check Stock

BIGTREETECH Octopus Pro V1.0 Controller Board New Upgrade with Octopus 32bit Motherboard Compatible TMC5160 Pro Stepper Driver Support Powerful DIY for 3D Printer Main Chip is STM32F446ZET6

【Main Control Chip】The main control adopts the 32-bit ARM Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180 MHz. The external....
【About Using Firmware】Support the use of Marlin2.0, killper, RRF three types of firmware. Please note: STM32F446ZET6 MCU flash memory space is....
【Stepper Motor】The Octopus Pro 3D printing motherboard can support up to 8 stepper motor drivers, and the motor drive power supply supports up to....
【Support Proximity Sensor】Support proximity sensor, jumper optional pull-up resistor, support more models. This function can be sensed without....
【High Temperature Test】The onboard MAX31865 can support 2/4-wire PT100/PT1000 temperature measurement without welding (the soldering resistance....

Check Stock

TCMMRC FC F4 Flight Controller 2-6S OSD BetaFlight 20x20mm for FPV Racing Drone

VERY EASY TO SOLDER, The F4 Flight Controller has multiple ports, no soldering, just plug in the port line. This is convenient for beginners..
FAST RESPONSE TIME AND EXCELLENT SHOCK ABSORPTION,MPU6000 gyro with SPI bus mode.
HIGHER RATE PID100MHz STM32F411 main control chip.
CLEANER IMAGE DISPLAYOSD chip and 5V BEC on board.
REASONABLE LAYOUT TO AVOID JUMPERSAccording to the installation requirements of most pilots, the functional pads are grouped together.

Check Stock

1.3 Inch IPS TFT LCD Display Module 240x240 ST7789 SPI Interface for Arduino STM ESP8266 (with pin Header)

The color level is displayed to make the TFT LCD color more realistic, the brightness is good, the contrast is high, the layering is strong and the color is bright..
Driver ST7789,sorpport 4-line SPI, save IO interface, especially suitable for arduino、ESP8266.
High resolution, application on mini WIFI TV、WIFI Internet weather clock、Smart wear、IOT etc..
you can contact us for reference schematic diagrams and PCB source files, STM32 and TKM32F499 reference programs and other related materials.

Check Stock

GoolRC Radiolink Byme-D Flight Stabiliser Flight Controller Gyroscope Self-Stabilization Balance for RC Airplane Fixed Wing Delta Wing Paper Plane SU27 F22

Product Name: Matek F411-WTE Flight Controller，STM32F411CEU6 OSD 2-6S Lipo.
IMU: BMI270, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial.
2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power).
Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g.
INAV Target: MATEKF411TE ( INAV4.1 or newer).

Check Stock