Top Sticky Pad Mount Reviews

Magnetic Phone Car Mount, ACEFAST Universal Phone Car Holder Low Installation Height Built-in Four N52 Super Strong Magnets Large Sticky Base Suction Cup Dashboard Windshield Flexible Installation

Flexible installation and use. The suction cup base can be firmly attached to the car center console or windshield. Allow car owner to choose how to install and use this magnetic phone car mount on the car. It can even be installed on the desktop at home or office to hold a cell phone..
Large sticky base suction cup with strong adsorption force. It can be reused after washing with water. Included circular metal plate (for smaller phones) and a rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone. In order to hold cell phone safely, the phone needs to be installed with iron pad and then attached to the magnetic mount..
Powerful suction cup and sticky pad for long time use. The sticky suction cup is double-locked, adsorbs firmly on the car dashboards or windshields. You can also use this magnetic cell phone mount to hold you phone on table, desk or other surfaces at home or in the office. Comes with extra dashboard pad fits all dashboards with smooth surfaces. We do not suggest to place the suction cup on leather, wall or filmed glass surfaces as the suction cup is designed with stong viscosity..

Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

... 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and press firmly for 5 to 10 minutes for better connecting to the car mount base..
【Package Included】2x Phone ring holder, 2x Metal plate, 2x Scratch-resistant protective films for meta....

Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

Cell Phone Holder Adhesive: 12 PACK VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24....

Check Stock

3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes

➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads..
➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace..
➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount..
➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace..
➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if ....

Check Stock

8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand

Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad in....

Check Stock

Ywhomal Traceless Super Sticky Gel Pads Anti-Slip Double Sided Gripping Pads for Auto Car Home Cell Phone Glass Photo Holder with Easy Remove Washable Reusable Design Pack of 10 (Transparent)

Feature of Upgraded Sticky Cell Gel Pads: Size: 75x64mmx3mm, Pack of 10, Color: Clear. Multi -purpose anti slip pad can be cut into any smaller pieces. IDEAL FOR YOUR DAILY LIFE..
No Traces or Residues: This double sided sticky gel pad will not leave any trace or residue on the surface you apply on, will well protect your wall, cell phones, furniture and other surfaces..
Easy to Remove and Sticky on : Ywhomal sticky gel pad is ultra durable and user friendly, Non-slip, very easy to use and just simple peel off and sticky on it , Before use, please, make sure the surface is perfectly flat and clean to stick your cell phone mat..
Washable and Reusable: Taking PU Nano gel pad material makes it can be recycle and washed. You can wash it if it is dirty or under not very sticky condition. You can use it for many times for long time and not only one time..
Design for Car Home Office Use: It helps you organize your car space and home space. you can use it as a nice car mount for your phones or tablet. for home, you can applied to your kitchen, toilet, cupboard, desk and many other places to hold small things like remote control, camera, phone, perfume, cigarettes, pen, coins, glasses, keys, mirror, carpet pad, cat paw mug and so on..

Check Stock

10 of Pop VHB 3 m Sticky Adhesive Replacement Compatible, 3 m Sticker Pads for Car Magnetic Phone Holder Double Sided Tape for Collapsible Grip & Stand and More

8 pack 1.4inch VHB 3 m and 2 pack 1.2inch sticky adhesive exclusively designed for grip holder back and magnetic cell phone car phone mount base.
Double sided self sticky,This adhesive replacement kit is a good choice to remount your pop wall mount. With your pop wall mount, you can position the phone anywhere there’s a flat hard surface, like in the car dashboard, locker, bathroom mirror, refrigerator, bed post, wall etc.
Easy to use: You need to remove the used 3 m tape of popocket wall mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of pop grip and press firmly for 12 seconds for better connecting to the surface.
Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads..
Package include: 8+2 pack 3 m pop sticky adhesive gel, 2 pack alcohol pads.

Check Stock

Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74') 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack

...ess charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect..
3M VHB Self-Adhesive: These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature(120°C). The stickiness of the powerful sticking discs is 40% higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more..
Easy to Use: The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum suction holder adaptor/electronics onto dashboard or windshield, please wait 24-48 HOURS then mount the appropriately sizes holder because non slip double sided adhesive foam tab cover needs some time to cure to the dash..
Important Tips: Each dashboard sticky pad is one-time use only. It cannot be reused. Premium semi permanent sticky disk with dual side adhesive backed for suction cup phone mount....

Check Stock

Sticky Adhesive Replacement for Windshield Camera Holder, AZXYI 6pcs 2.76''(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder

【Strong Sticky Adhesive】These extra strong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120°C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads..
【6Pcs Clear Adhesives Replacement】We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75") for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup..
【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market..
【Easy to Install】Provided rounded rectangle raised label to easily p....

Check Stock

Kaome 3 in 1 Phone Holder for Car Phone Mount Suction Cup Universal Air Vent Windshield Dashboard for iPhone 11 pro/11/Xs Max/XR/X/8/7/iPad Mini/Galaxy S10/S9

【Super Sticky Suction Pad】: Extra-strong suction cup with a sticky gel pad provide excellent adhesion. Viscosity is twice that of traditional suction cups..
【3 In 1 Car Mount Holder】: Provide a suction cup holder and a ventilation mount, allows you to flexibly mount the mobile phone holder in several positions..
【Three-stage Adjustment Switch】: Including adjustable arm length, rotatable arm, and a 360° joint ball to help you find the most suitable angle to navigation..
【Spring pull-down structure】: It has a longer service life and ductility than a one-button release phone clip. It supports 4-11 inch mobile phones, tablets..
【Kaome Guarantees Quality and Service】: Every product sold by Kaome has 12 month’s warranty, If there are any problems please feel free to contact us..

Check Stock

elago Apple TV Multi Mount Bundle with Apple TV Remote Holder - Compatible with All Apple TVs Including Apple TV 4K / HD

✅ 【ALL IN ONE COMBO】 Necessary for Apple TV users since this practical package includes 2 items: Multi Mount and Remote Holder Mount. Mount your Apple TV and remote.
✅ 【THREE MOUNTING OPTIONS】 You can screw it to the wall, use powerful magnets in the mount to attach it to the metal surface of a television, or hang it anywhere you want with the strap. Mount your Apple TV conveniently the way you want it!.
✅ 【VENTILATION】 Vents allow air to circulate under the Apple TV and prevents overheating..
✅ 【USE GEL PAD TO INSTALL REMOTE HOLDER】 Remove the gel pad film and attach it to the TV (side or behind) or a flat wall. There is no sticky residue on the wall or tv surface after you remove the gel pad. It can be reused by washing it with wet tissue or water..
✅ 【USE SCREWS TO INSTALL REMOTE HOLDER】 In case your wall is not flat, you can use screws to attach the apple tv remote holder anywhere you want. Screws are included..

Check Stock

GPS Mount, APPS2Car Upgraded 13.5-Inch Gooseneck Suction Cup GPS Mount for Truck/Van/Car, Windshield Dashboard GPS Holder for Garmin Dezl Drive Nuvi Zumo DriveSmart DriveassistRV StreetPilot

EXTRA LONG GOOSENECK ARM - The aluminum long arm can bend up to 13.5 inches for various visual angles to your liking, making it easy to mount the GPS on the windshield or dashboard without blocking the field of view especially when you drive a truck, semi-truck, or van.
SUPER STICKY SUCTION CUP - Featuring a layer of super sticky gel and locking lever for steady hold, the GPS dash mount will not come undone or slip off.
You can effortlessly mount it on most flat surfaces, such as dashboard, table, wall, windshield, and window.
ANTI-VIBRATION STABILIZER - With the extra hold of the anti-shake stabilizer, the strong sticky suction cup ball mount can securely hold the GPS navigator in its position without vibrating around even on a bumpy road.
REPLACEMENT GPS HOLDER - An alternative to gps cd slot mount holder, gps air vent mount holder, gps friction beanbag mount holder and gps dash pad (NB: Mounting bracket is not included).
WIDE COMPATIBILITY - Fit for Garmin Dezl 550 560 570 580 660 680 760 770 780 785 790(LM LMT LMT-S LMTHD), Drivesmart 50 51 60 61 70 71(LMT NA LMT-S LMTHD), Driveassist 50 51 60 61 (LMT LMT-S LMT-D LMTHD NA), NuviCam LMTHD, RV 660 760 770 (LMT LMT-S), Zumo 220 340 345 350 390 395 396 450 550 590....

Check Stock

Radar Detector – Dashboard Magic MOUNTING PAD for Passport 9500ix, Escort, Valentine, Cobra, Beltronics, Whistler

Holds your radar detector safe and in-place while you drive! Easy mount, install.
No glue, no tape or Velcro, no brackets, no suction cups that fall off, just place your radar detector on the magic mat and it stays safe!.
Amazing super grip, strong hold. Works for GPS, satellite radios and cell phones too..
EASY & FAST install, just place the pad on your dashboard and add your radar detector or cell phone, GPS, Radio…even sunglasses, coins, garage door opener..
No sticky residue, removable, washable and reusable. Amazing product! Buy one for your cell phone too!.
EASY & FAST install, just place the pad on your dashboard and add your radar detector or cell phone, GPS, Raidio…even sunglasses,coins, garage door opener..

Check Stock