Top Stern Mount Trolling Motor Reviews

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Minn Kota 1358805; Trolling Motor, Terrova 55/ Ip_Bt 54 No Fpdl

  • What's in the Box: Terrova 55lb. 54" motor, i-Pilot Remote, Lanyard, Heading Sensor, MKP-32 Prop, Mounting Hardware. 2-Year Warranty.
  • Lift-Assist Design: A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time. Stow/Deploy Lever: Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly. Push-to-Test Battery Meter: Press a button on the trolling motor head to get an instant status of battery life you have left..
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
  • Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay r....
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Battery Box, Duokon Trolling Motor Power Center ,USB & 12V Charger Port Minnkota Trolling Battery Box Plastic Minnkota Trolling Motor Power Center Station Battery Box

  • ... please check online to avoid purchase errors.
  • Can display the current status ---- Motor Power Battery Box built-in battery meter can display the current charging status, easy to connect the battery terminal, used to connect the wire, only battery box / battery box, excluding battery.
  • Excellent material ---- Minnkota Trolling Battery Box is made of plastic material, durable, rust-proof, wear-resistant, corrosion-resistant, , which can effectively extend the service life of the product.
  • Superb craftsmanship ---- Motor Power Station strictly follows the original factory standard, after strict quality inspection by our production team, professional manufacturing, can provide lighting power demand in various scenarios, stable performance, long-term use.
  • Easy installation ---- The Motor Battery Box is easy to install and has reliable performance. The user can install it according to the installation instructions. The product also provides a pair of 12V accessory plugs and manual reset circuit breakers, which can directly replace the old or damaged ones.
Check Stock

Intex Seahawk 4 Inflatable Raft Set and 2 Transom Mount Boat Trolling Motors

  • Intex 12V Transom Mount Boat Trolling Motor | 68631E.
  • There will be no part of the lake out of your reach!.
  • Ideal for a wide variety of boats including these Intex inflatable boats:.
Check Stock

Newport Vessels 55lb Thrust Saltwater Electric Pontoon Trolling Motor with Deck Mount Bracket & 55' Shaft

  • 66″ Battery Cable Leads w/ ring connectors.
  • Durable Deck Mount Bracket (Pontoon Trolling Motor Mount).
Check Stock

Marinco 2018BP-24 4-Wire 12/24V Trolling Motor Plug, Black

  • Jumper Internally To Supply 12V And 24V Power To The Trolling Motor.
  • 4-Wire Trolling/Charging System Eliminates The Need For A Charge/Run Switch.
  • Install The Receptacle On The Boat, Mount The Black Plug On The Trolling Motor And The Red Plug On The Leads Of The Battery Charger.
Check Stock

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

BKC Brooklyn Kayak Company UH-TM315 Kayak Trolling Motor Mount - Ambidextrous Trolling Motor Mount for Quick and Easy Kayak Trolling Motor Setup

  • Easy Setup and Removal - Motor mount connects to most kayak hulls in a matter of minutes and can be removed in a matter of seconds.
  • Ambidextrous Design - Mount allows for installation of trolling motor for easy use by both left and right handed boaters.
  • Durable Materials - Rust-resistant metal and fade- and corrosion-resistant plastics will stand the test of time and exposure to the element.
  • Lightweight Construction - Hollow but sturdy tubing reduces motor mount weight, allowing for easy handling of mount and adding minimal weight to kayak.
  • Must Have for Fishing - Helps upgrade a paddle only kayak into the ultimate trolling fishing vessel without any permanent hull alterations required.
Check Stock

Pactrade Marine Boat Trolling Motor Foot Control Switch Continuous On Lever 50A

  • This is a Trolling Motor Control Switch that is made for 12V, 24V trolling motors. This product is made of Black PC and it comes with a push switch..
  • This trolling motor is rated to 50 Amps and has a weatherproof control system at IP:65. It also comes with a continuous "ON" lever..
  • For installation, select a desired location for switch. Then, mount the switch to deck with fasteners included..
  • Connect the negative wire of motor to the negative of DC as shown in the diagram. Connect a wire of the switch to 12/24VDC positive. Connect another wire of the switch to the positive of the motor as shown in diagram. Test the operation after set-up..
  • Product Dimension (Switch): 3-1/4" x 2-1/2" x 1-1/4". Item Number: P72520-02..
Check Stock