Top Step motor Reviews

Stepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy

This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
Applications: 3D Printer, Sculpturing machine, Mechanical arm.

Check Stock

AiTrip A4988 Compatible StepStick Stepper Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4 Pack of 5pcs 5pcs A4988

A4988 driver board widely used in 3D printers and small CNC machines.
Simple step and direction control interface.
Thermal protection, over-current protection, ground fault protection.
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated....

Check Stock

DaFuRui 5Pcs A4988 Stepstick Stepper Motor Driver Module with Aluminum Heat Sink for 3D Printer Reprap CNC Machine or Robotics

★A4988 is a complete microstepping motor driver with built-in translator for easy operation..
★Five step resolutions:full-step,half-step,quarter-step,eighth-step,and sixteenth-step.Output drive capacity of up to 35V and±2A..
★Micro-step operation, Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)..
★Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection..
★Applications: Stepper motors /3D printer/CNC/engraving machines/Supported 3d printers..

Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

... work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable..

Check Stock

Otter: What Pet Is Best? (My First I Can Read)

Introductory mechanical engineering kit for ages five and up..
A beautifully-illustrated storybook manual follows Ty and Karlie, two young engineers, as they meet a variety of fun, cute robotic animals at the robot pet shop!.
Clear and detailed step-by-step assembly instructions guide children to build 8 motorized models of the robots from the story, including an owl, french bulldog, sloth, panda, chameleon, cat, turtle, and rabbit..
Model building develops fine motor skills: compatible with other Kids First early engineering kits, the large cubic building components are perfect for the target age group..
Motor box: The included battery-powered motor box is what gets the models moving! (2 AA batteries required, not included).

Check Stock

Neewer Camera Slider Motorized 31.5-inch APP Control Carbon Fiber Track Dolly Rail with Time Lapse Video Shot Follow Focus Shot and 120 Degree Panoramic Shooting，Only compatible with iPhone

【KINDLY NOTE】Because we are upgrading the download page, the QR code printed on the motor is currently invalid for Android phones. Please scan the....
ULTRA SILENT STEP MOTOR DRIVING AND PRECISE: Have a unique silent step motor driving technology which combines ultra precise step motor positioning....
LIGHTWEIGHT AND BALANCED DESIGN: Made of carbon fiber and aluminum alloy, lightweight and convenient to carry outside for photography. Use 8....
SUPPORT MULTIPLE SHOOTING MODES: Focusing shot and 120 degree wide angle shoot are available. It supports time-lapse shooting, video shooting and auto....
UNIVERSAL COMPATIBILITY: The electric camera slider is compatible with Canon, Nikon, Sony, Panasonic, Samsung and other camcorder and micro-camera.

Check Stock

Kwikee Electric Step Table Motor and Cable Replacement for 5th Wheel RVs, Travel Trailers and Motorhomes

Designed to help the step automatically retract and extend when the coach door is opened and closed.
Motor will automatically shut down if the step strikes an obstacle.
Weatherproof wiring and connectors prevent shorts and corrosion in the system.
Interchangeable with Kwikee part number 1101428.

Check Stock

LEABON 300-1406 RV Entry Step Motor Compatible with RV Coach Motorhome Toyhauler OEM Replace 369506 1820124 1636669

【REPLACE THE FAULTY MOTOR】If your RV Entry Stepsis retracting or extending only part of the way or won't stay retracted while driving, or the....
【HIGH QUALITY】Our Entry Steps Motor use of enhanced high-quality materials, wear-resistant, corrosion-resistant, moisture-resistant, long service....
【INSTALL】The entry-level stepper motor of the electric caravan is easy to install, it can perfectly replace old products, seamlessly fit, that is....
【RV Step Part Number】300-1406 3001406 1820124 369506 301695 163669 SP-163669 SP-1636669, Compatible with RV, Coach, Motorhome, Toyhauler and Step....
【SERVICE GUARANTEE】This RV Entry Steps Motor is Affordable, Superior Aftermarket Part, If you Have any Question, Please Contact us, You have....

Check Stock

AntennaX Power Antenna Replacement Mast for Toyota Sequoia

This is a new high quality aftermarket stainless steel Power Antenna Mast that cost less than 50% of the dealer factory retail price.
If you can hear your power antenna motor running, clicking, or grinding when you turn on and off your radio, then all you need to do is replace your power antenna mast.
If you do not hear your Power Antenna Motor running, then you will need to replace the whole unit.
Installation is very simple and can be done without removing the power antenna motor from your vehicle Detailed step-by-step installation instructions are included and written in simple english and include diagrams, photographs, and troubleshooting.

Check Stock

Stepper Motor Driver Module PCB Board DRV8825 for 3D Printer RepRap StepStick

· Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
· Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates.
· Built-in regulator (no external logic voltage supply needed).
· Exposed solderable ground pad below the driver IC on the bottom of the PCB.

Check Stock

Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series

Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.)..
1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase..
High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.).

Check Stock

Kwikee Electric Step Motor Gearbox Upgrade Kit for 5th Wheel RVs, Travel Trailers and Motorhomes

Updates original step motors on all step models prior to 2006.
Includes IMGL (integrated motor / gearbox / linkage), 510 control unit and door switch.

Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.

Check Stock